From patchwork Thu Dec 29 15:50:30 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13083602 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 94DDCC4332F for ; Thu, 29 Dec 2022 15:52:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233751AbiL2PwH (ORCPT ); Thu, 29 Dec 2022 10:52:07 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40586 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233639AbiL2Pv1 (ORCPT ); Thu, 29 Dec 2022 10:51:27 -0500 Received: from mail-wm1-x330.google.com (mail-wm1-x330.google.com [IPv6:2a00:1450:4864:20::330]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 040CEA3 for ; Thu, 29 Dec 2022 07:50:49 -0800 (PST) Received: by mail-wm1-x330.google.com with SMTP id bg10so13419692wmb.1 for ; Thu, 29 Dec 2022 07:50:48 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=xPo5nVt0Kpgd5EbSH8dlxDqDerGDGDTF8SgFZvR4FcE=; b=a0tRJHg/m6eGmTtv+MwfxFWmYta87WnxiQP0HjPqexrT+cOQICdHPPquM33MoJ7Gcq kHYOcH7RuCn9tSpgP/ryl6VV3QQfKF1S8WHUb0Ga/0tZxnBds1i9T/2tuYQbOExdZdlY /qEZctAwNqDsaFiq8LRNmSmAYSAXvKXU/THf4UgPI5giuLzJe26wIYjqcGKvS30F929F 14pyxnIkFQ+ViOOT9+7CyaiIPyxdnyQUgPjg5Bi5lxiZj0D+ilaT+BsKi5uToZYiLqzh dhdcjNt8kSa4POctMqW4aCFY24LxBNLhmAE1DV0lF/gaSPYdry6AwmEgLzHzAJ/369Xb aw8Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=xPo5nVt0Kpgd5EbSH8dlxDqDerGDGDTF8SgFZvR4FcE=; b=q6ix5LWc+eDx97x4/daeS9C4EuHLV2ecpy4rfFqaO5eZsMmyQTABETxGQC+v+5Pwob iFs25D8nzz2L7kO51yGN8aB/tu7mqkWx1yChgfH3zdoo2A2CJE1tdEtjVqB2hpfMEdh8 9Cx0R4MOThlBU/aDNlaPCsAUqKsKQ/8Zq57elCberuKhDoRsn9ZpiqDbuF1hfdJCyzZY rvTsrqOCnunrb5zaZ2YXw3mOI5qTTj1MmARU/dy1Qm65PEqCUT9om5NNz7yH69gqaWoN OCjKX8UlmcUHuuMtQVjAhPYM1FWi3rZfXw3QNkgMzsXqmv9xnmG0Ujf0IV4iaWzl6A9R e0gg== X-Gm-Message-State: AFqh2kq/6cuj15FGa8L6AlIpp8mciKHJKmsXDiH9y3r/OCnijrY++yhA aQghA5JghCixUSfNJWV6C8xTiQ== X-Google-Smtp-Source: AMrXdXu9fJL0PfViWmOkUMZS8SdmdtmcB9MTmicIkWTq1zjJIp6RUmuwEWOjg9epco8KJP5axgwvgg== X-Received: by 2002:a05:600c:c07:b0:3d9:73fe:96f8 with SMTP id fm7-20020a05600c0c0700b003d973fe96f8mr12625796wmb.32.1672329047454; Thu, 29 Dec 2022 07:50:47 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:8f7a:98d8:9d8d:ced8]) by smtp.gmail.com with ESMTPSA id bh12-20020a05600c3d0c00b003cfa81e2eb4sm25251647wmb.38.2022.12.29.07.50.46 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 29 Dec 2022 07:50:47 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= , Krzysztof Kozlowski Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski Subject: [PATCH v6 14/14] tty: serial: qcom-geni-serial: add support for serial engine DMA Date: Thu, 29 Dec 2022 16:50:30 +0100 Message-Id: <20221229155030.418800-15-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221229155030.418800-1-brgl@bgdev.pl> References: <20221229155030.418800-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski The qcom-geni-serial driver currently only works in SE FIFO mode. This limits the UART speed to around 180 kB/s. In order to achieve higher speeds we need to use SE DMA mode. Keep the console port working in FIFO mode but extend the code to use DMA for the high-speed port. Signed-off-by: Bartosz Golaszewski --- drivers/tty/serial/qcom_geni_serial.c | 314 +++++++++++++++++++++----- 1 file changed, 255 insertions(+), 59 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 0b3786040bfb..c1aea9d1dc16 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -70,6 +70,8 @@ #define UART_START_TX 0x1 /* UART S_CMD OP codes */ #define UART_START_READ 0x1 +#define UART_PARAM 0x1 +#define UART_PARAM_RFR_OPEN BIT(7) #define UART_OVERSAMPLING 32 #define STALE_TIMEOUT 16 @@ -95,9 +97,11 @@ /* We always configure 4 bytes per FIFO word */ #define BYTES_PER_FIFO_WORD 4U +#define DMA_RX_BUF_SIZE 2048 + struct qcom_geni_device_data { bool console; - void (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop); + enum geni_se_xfer_mode mode; }; struct qcom_geni_private_data { @@ -118,9 +122,11 @@ struct qcom_geni_serial_port { u32 tx_fifo_depth; u32 tx_fifo_width; u32 rx_fifo_depth; + dma_addr_t tx_dma_addr; + dma_addr_t rx_dma_addr; bool setup; unsigned int baud; - void *rx_fifo; + void *rx_buf; u32 loopback; bool brk; @@ -249,6 +255,16 @@ static struct qcom_geni_serial_port *get_port_from_line(int line, bool console) return port; } +static bool qcom_geni_serial_main_active(struct uart_port *uport) +{ + return readl(uport->membase + SE_GENI_STATUS) & M_GENI_CMD_ACTIVE; +} + +static bool qcom_geni_serial_secondary_active(struct uart_port *uport) +{ + return readl(uport->membase + SE_GENI_STATUS) & S_GENI_CMD_ACTIVE; +} + static bool qcom_geni_serial_poll_bit(struct uart_port *uport, int offset, int field, bool set) { @@ -552,18 +568,11 @@ static void handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) static void handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) { - struct tty_port *tport; struct qcom_geni_serial_port *port = to_dev_port(uport); - u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE; - u32 words = ALIGN(bytes, num_bytes_pw) / num_bytes_pw; + struct tty_port *tport = &uport->state->port; int ret; - tport = &uport->state->port; - ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, port->rx_fifo, words); - if (drop) - return; - - ret = tty_insert_flip_string(tport, port->rx_fifo, bytes); + ret = tty_insert_flip_string(tport, port->rx_buf, bytes); if (ret != bytes) { dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n", __func__, ret, bytes); @@ -578,16 +587,75 @@ static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport) return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS); } -static void qcom_geni_serial_start_tx(struct uart_port *uport) +static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport) { - u32 irq_en; - u32 status; + struct qcom_geni_serial_port *port = to_dev_port(uport); + bool done; + u32 m_irq_en; + + if (!qcom_geni_serial_main_active(uport)) + return; + + if (port->rx_dma_addr) { + geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr, + port->tx_remaining); + port->tx_dma_addr = 0; + port->tx_remaining = 0; + } + + m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + writel(m_irq_en, uport->membase + SE_GENI_M_IRQ_EN); + geni_se_cancel_m_cmd(&port->se); + + done = qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS, + S_CMD_CANCEL_EN, true); + if (!done) { + geni_se_abort_m_cmd(&port->se); + done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_ABORT_EN, true); + if (!done) + dev_err_ratelimited(uport->dev, "M_CMD_ABORT_EN not set"); + writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); + } + + writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); +} + +static void qcom_geni_serial_start_tx_dma(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + struct circ_buf *xmit = &uport->state->xmit; + unsigned int xmit_size; + int ret; + + if (port->tx_dma_addr) + return; + + xmit_size = uart_circ_chars_pending(xmit); + if (xmit_size < WAKEUP_CHARS) + uart_write_wakeup(uport); - status = readl(uport->membase + SE_GENI_STATUS); - if (status & M_GENI_CMD_ACTIVE) + xmit_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + qcom_geni_serial_setup_tx(uport, xmit_size); + + ret = geni_se_tx_dma_prep(&port->se, &xmit->buf[xmit->tail], + xmit_size, &port->tx_dma_addr); + if (ret) { + dev_err(uport->dev, "unable to start TX SE DMA: %d\n", ret); + qcom_geni_serial_stop_tx_dma(uport); return; + } + + port->tx_remaining = xmit_size; +} + +static void qcom_geni_serial_start_tx_fifo(struct uart_port *uport) +{ + u32 irq_en; - if (!qcom_geni_serial_tx_empty(uport)) + if (qcom_geni_serial_main_active(uport) || + !qcom_geni_serial_tx_empty(uport)) return; irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); @@ -597,19 +665,17 @@ static void qcom_geni_serial_start_tx(struct uart_port *uport) writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); } -static void qcom_geni_serial_stop_tx(struct uart_port *uport) +static void qcom_geni_serial_stop_tx_fifo(struct uart_port *uport) { u32 irq_en; - u32 status; struct qcom_geni_serial_port *port = to_dev_port(uport); irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); irq_en &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN); writel(0, uport->membase + SE_GENI_TX_WATERMARK_REG); writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); - status = readl(uport->membase + SE_GENI_STATUS); /* Possible stop tx is called multiple times. */ - if (!(status & M_GENI_CMD_ACTIVE)) + if (!qcom_geni_serial_main_active(uport)) return; geni_se_cancel_m_cmd(&port->se); @@ -623,14 +689,13 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport) writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); } -static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop) +static void qcom_geni_serial_handle_rx_fifo(struct uart_port *uport, bool drop) { u32 status; u32 word_cnt; u32 last_word_byte_cnt; u32 last_word_partial; u32 total_bytes; - struct qcom_geni_serial_port *port = to_dev_port(uport); status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS); word_cnt = status & RX_FIFO_WC_MSK; @@ -645,13 +710,12 @@ static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop) total_bytes += last_word_byte_cnt; else total_bytes += BYTES_PER_FIFO_WORD; - port->dev_data->handle_rx(uport, total_bytes, drop); + handle_rx_console(uport, total_bytes, drop); } -static void qcom_geni_serial_stop_rx(struct uart_port *uport) +static void qcom_geni_serial_stop_rx_fifo(struct uart_port *uport) { u32 irq_en; - u32 status; struct qcom_geni_serial_port *port = to_dev_port(uport); u32 s_irq_status; @@ -663,9 +727,7 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport) irq_en &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN); writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); - status = readl(uport->membase + SE_GENI_STATUS); - /* Possible stop rx is called multiple times. */ - if (!(status & S_GENI_CMD_ACTIVE)) + if (!qcom_geni_serial_secondary_active(uport)) return; geni_se_cancel_s_cmd(&port->se); @@ -678,23 +740,20 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport) s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); /* Flush the Rx buffer */ if (s_irq_status & S_RX_FIFO_LAST_EN) - qcom_geni_serial_handle_rx(uport, true); + qcom_geni_serial_handle_rx_fifo(uport, true); writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR); - status = readl(uport->membase + SE_GENI_STATUS); - if (status & S_GENI_CMD_ACTIVE) + if (qcom_geni_serial_secondary_active(uport)) qcom_geni_serial_abort_rx(uport); } -static void qcom_geni_serial_start_rx(struct uart_port *uport) +static void qcom_geni_serial_start_rx_fifo(struct uart_port *uport) { u32 irq_en; - u32 status; struct qcom_geni_serial_port *port = to_dev_port(uport); - status = readl(uport->membase + SE_GENI_STATUS); - if (status & S_GENI_CMD_ACTIVE) - qcom_geni_serial_stop_rx(uport); + if (qcom_geni_serial_secondary_active(uport)) + qcom_geni_serial_stop_rx_fifo(uport); geni_se_setup_s_cmd(&port->se, UART_START_READ, 0); @@ -707,6 +766,94 @@ static void qcom_geni_serial_start_rx(struct uart_port *uport) writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); } +static void qcom_geni_serial_stop_rx_dma(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + + if (!qcom_geni_serial_secondary_active(uport)) + return; + + geni_se_cancel_s_cmd(&port->se); + qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS, + S_CMD_CANCEL_EN, true); + + if (qcom_geni_serial_secondary_active(uport)) + qcom_geni_serial_abort_rx(uport); + + if (port->rx_dma_addr) { + geni_se_rx_dma_unprep(&port->se, port->rx_dma_addr, + DMA_RX_BUF_SIZE); + port->rx_dma_addr = 0; + } +} + +static void qcom_geni_serial_start_rx_dma(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + int ret; + + if (qcom_geni_serial_secondary_active(uport)) + qcom_geni_serial_stop_rx_dma(uport); + + geni_se_setup_s_cmd(&port->se, UART_START_READ, UART_PARAM_RFR_OPEN); + + ret = geni_se_rx_dma_prep(&port->se, port->rx_buf, + DMA_RX_BUF_SIZE, + &port->rx_dma_addr); + if (ret) { + dev_err(uport->dev, "unable to start RX SE DMA: %d\n", ret); + qcom_geni_serial_stop_rx_dma(uport); + } +} + +static void qcom_geni_serial_handle_rx_dma(struct uart_port *uport, bool drop) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + u32 rx_in; + int ret; + + if (!qcom_geni_serial_secondary_active(uport)) + return; + + if (!port->rx_dma_addr) + return; + + geni_se_rx_dma_unprep(&port->se, port->rx_dma_addr, DMA_RX_BUF_SIZE); + port->rx_dma_addr = 0; + + rx_in = readl(uport->membase + SE_DMA_RX_LEN_IN); + if (!rx_in) { + dev_warn(uport->dev, "serial engine reports 0 RX bytes in!\n"); + return; + } + + if (!drop) + handle_rx_uart(uport, rx_in, drop); + + ret = geni_se_rx_dma_prep(&port->se, port->rx_buf, + DMA_RX_BUF_SIZE, + &port->rx_dma_addr); + if (ret) { + dev_err(uport->dev, "unable to start RX SE DMA: %d\n", ret); + qcom_geni_serial_stop_rx_dma(uport); + } +} + +static void qcom_geni_serial_start_rx(struct uart_port *uport) +{ + uport->ops->start_rx(uport); +} + +static void qcom_geni_serial_stop_rx(struct uart_port *uport) +{ + uport->ops->stop_rx(uport); +} + +static void qcom_geni_serial_stop_tx(struct uart_port *uport) +{ + uport->ops->stop_tx(uport); +} + static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport, unsigned int chunk) { @@ -731,8 +878,8 @@ static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport, } } -static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, - bool active) +static void qcom_geni_serial_handle_tx_fifo(struct uart_port *uport, + bool done, bool active) { struct qcom_geni_serial_port *port = to_dev_port(uport); struct circ_buf *xmit = &uport->state->xmit; @@ -752,7 +899,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, /* All data has been transmitted and acknowledged as received */ if (!pending && !status && done) { - qcom_geni_serial_stop_tx(uport); + qcom_geni_serial_stop_tx_fifo(uport); goto out_write_wakeup; } @@ -795,12 +942,32 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, uart_write_wakeup(uport); } +static void qcom_geni_serial_handle_tx_dma(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + struct circ_buf *xmit = &uport->state->xmit; + + uart_xmit_advance(uport, port->tx_remaining); + geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr, port->tx_remaining); + port->tx_dma_addr = 0; + port->tx_remaining = 0; + + if (!uart_circ_empty(xmit)) + qcom_geni_serial_start_tx_dma(uport); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(uport); +} + static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) { u32 m_irq_en; u32 m_irq_status; u32 s_irq_status; u32 geni_status; + u32 dma; + u32 dma_tx_status; + u32 dma_rx_status; struct uart_port *uport = dev; bool drop_rx = false; struct tty_port *tport = &uport->state->port; @@ -813,10 +980,15 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) m_irq_status = readl(uport->membase + SE_GENI_M_IRQ_STATUS); s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + dma_tx_status = readl(uport->membase + SE_DMA_TX_IRQ_STAT); + dma_rx_status = readl(uport->membase + SE_DMA_RX_IRQ_STAT); geni_status = readl(uport->membase + SE_GENI_STATUS); + dma = readl(uport->membase + SE_GENI_DMA_MODE_EN); m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); writel(m_irq_status, uport->membase + SE_GENI_M_IRQ_CLEAR); writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR); + writel(dma_tx_status, uport->membase + SE_DMA_TX_IRQ_CLR); + writel(dma_rx_status, uport->membase + SE_DMA_RX_IRQ_CLR); if (WARN_ON(m_irq_status & M_ILLEGAL_CMD_EN)) goto out_unlock; @@ -826,10 +998,6 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) tty_insert_flip_char(tport, 0, TTY_OVERRUN); } - if (m_irq_status & m_irq_en & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN)) - qcom_geni_serial_handle_tx(uport, m_irq_status & M_CMD_DONE_EN, - geni_status & M_GENI_CMD_ACTIVE); - if (s_irq_status & (S_GP_IRQ_0_EN | S_GP_IRQ_1_EN)) { if (s_irq_status & S_GP_IRQ_0_EN) uport->icount.parity++; @@ -839,8 +1007,35 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) port->brk = true; } - if (s_irq_status & (S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN)) - qcom_geni_serial_handle_rx(uport, drop_rx); + if (dma) { + if (dma_tx_status & TX_DMA_DONE) + qcom_geni_serial_handle_tx_dma(uport); + + if (dma_rx_status) { + if (dma_rx_status & RX_RESET_DONE) + goto out_unlock; + + if (dma_rx_status & RX_DMA_PARITY_ERR) { + uport->icount.parity++; + drop_rx = true; + } + + if (dma_rx_status & RX_DMA_BREAK) + uport->icount.brk++; + + if (dma_rx_status & (RX_DMA_DONE | RX_EOT)) + qcom_geni_serial_handle_rx_dma(uport, drop_rx); + } + } else { + if (m_irq_status & m_irq_en & + (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN)) + qcom_geni_serial_handle_tx_fifo(uport, + m_irq_status & M_CMD_DONE_EN, + geni_status & M_GENI_CMD_ACTIVE); + + if (s_irq_status & (S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN)) + qcom_geni_serial_handle_rx_fifo(uport, drop_rx); + } out_unlock: uart_unlock_and_check_sysrq(uport); @@ -909,7 +1104,7 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) geni_se_config_packing(&port->se, BITS_PER_BYTE, BYTES_PER_FIFO_WORD, false, true, true); geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); - geni_se_select_mode(&port->se, GENI_SE_FIFO); + geni_se_select_mode(&port->se, port->dev_data->mode); qcom_geni_serial_start_rx(uport); port->setup = true; @@ -1308,10 +1503,10 @@ static void qcom_geni_serial_pm(struct uart_port *uport, static const struct uart_ops qcom_geni_console_pops = { .tx_empty = qcom_geni_serial_tx_empty, - .stop_tx = qcom_geni_serial_stop_tx, - .start_tx = qcom_geni_serial_start_tx, - .stop_rx = qcom_geni_serial_stop_rx, - .start_rx = qcom_geni_serial_start_rx, + .stop_tx = qcom_geni_serial_stop_tx_fifo, + .start_tx = qcom_geni_serial_start_tx_fifo, + .stop_rx = qcom_geni_serial_stop_rx_fifo, + .start_rx = qcom_geni_serial_start_rx_fifo, .set_termios = qcom_geni_serial_set_termios, .startup = qcom_geni_serial_startup, .request_port = qcom_geni_serial_request_port, @@ -1329,9 +1524,10 @@ static const struct uart_ops qcom_geni_console_pops = { static const struct uart_ops qcom_geni_uart_pops = { .tx_empty = qcom_geni_serial_tx_empty, - .stop_tx = qcom_geni_serial_stop_tx, - .start_tx = qcom_geni_serial_start_tx, - .stop_rx = qcom_geni_serial_stop_rx, + .stop_tx = qcom_geni_serial_stop_tx_dma, + .start_tx = qcom_geni_serial_start_tx_dma, + .start_rx = qcom_geni_serial_start_rx_dma, + .stop_rx = qcom_geni_serial_stop_rx_dma, .set_termios = qcom_geni_serial_set_termios, .startup = qcom_geni_serial_startup, .request_port = qcom_geni_serial_request_port, @@ -1400,9 +1596,9 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) port->tx_fifo_width = DEF_FIFO_WIDTH_BITS; if (!data->console) { - port->rx_fifo = devm_kcalloc(uport->dev, - port->rx_fifo_depth, sizeof(u32), GFP_KERNEL); - if (!port->rx_fifo) + port->rx_buf = devm_kzalloc(uport->dev, + DMA_RX_BUF_SIZE, GFP_KERNEL); + if (!port->rx_buf) return -ENOMEM; } @@ -1564,12 +1760,12 @@ static int qcom_geni_serial_sys_hib_resume(struct device *dev) static const struct qcom_geni_device_data qcom_geni_console_data = { .console = true, - .handle_rx = handle_rx_console, + .mode = GENI_SE_FIFO, }; static const struct qcom_geni_device_data qcom_geni_uart_data = { .console = false, - .handle_rx = handle_rx_uart, + .mode = GENI_SE_DMA, }; static const struct dev_pm_ops qcom_geni_serial_pm_ops = {