diff mbox series

[1/9] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: correct pins pattern

Message ID 20221230135645.56401-1-krzysztof.kozlowski@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series [1/9] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: correct pins pattern | expand

Commit Message

Krzysztof Kozlowski Dec. 30, 2022, 1:56 p.m. UTC
SC8280XP LPASS LPI pin controller has GPIO 0-18:

  sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
    'pins' is a required property
    'function' is a required property
    'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
    'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'
    'gpio2' does not match '^gpio([0-1]|1[0-8])$'

Fixes: 958bb025f5b3 ("dt-bindings: pinctrl: qcom: Add sc8280xp lpass lpi pinctrl bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml       | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Rob Herring (Arm) Jan. 8, 2023, 8:08 p.m. UTC | #1
On Fri, 30 Dec 2022 14:56:37 +0100, Krzysztof Kozlowski wrote:
> SC8280XP LPASS LPI pin controller has GPIO 0-18:
> 
>   sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
>     'pins' is a required property
>     'function' is a required property
>     'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
>     'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'
>     'gpio2' does not match '^gpio([0-1]|1[0-8])$'
> 
> Fixes: 958bb025f5b3 ("dt-bindings: pinctrl: qcom: Add sc8280xp lpass lpi pinctrl bindings")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml       | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Krzysztof Kozlowski Jan. 13, 2023, 10:50 a.m. UTC | #2
On Fri, 30 Dec 2022 14:56:37 +0100, Krzysztof Kozlowski wrote:
> SC8280XP LPASS LPI pin controller has GPIO 0-18:
> 
>   sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
>     'pins' is a required property
>     'function' is a required property
>     'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
>     'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'
>     'gpio2' does not match '^gpio([0-1]|1[0-8])$'
> 
> [...]

Applied, thanks!

[1/9] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: correct pins pattern
      https://git.kernel.org/krzk/linux-dt/c/3c90b1ba8cc49b3c485e4477b9977e52a16509d3

Best regards,
Bjorn Andersson Jan. 18, 2023, 11:55 p.m. UTC | #3
On Fri, 30 Dec 2022 14:56:37 +0100, Krzysztof Kozlowski wrote:
> SC8280XP LPASS LPI pin controller has GPIO 0-18:
> 
>   sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
>     'pins' is a required property
>     'function' is a required property
>     'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
>     'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'
>     'gpio2' does not match '^gpio([0-1]|1[0-8])$'
> 
> [...]

Applied, thanks!

[8/9] arm64: dts: qcom: msm8916-samsung-a2015: correct motor pinctrl node name
      commit: de385ae2aa629a7d3298faa3f3fe9d19bf0b4f6a
[9/9] arm64: dts: qcom: sc7280-idp: add amp pin config function
      commit: bf37b5bc72204a69636c26bb8cd90cfc70ca8056

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
index 7d2589387e1a..309d3dd9013b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
@@ -65,7 +65,7 @@  $defs:
           List of gpio pins affected by the properties specified in this
           subnode.
         items:
-          pattern: "^gpio([0-1]|1[0-8])$"
+          pattern: "^gpio([0-9]|1[0-8])$"
 
       function:
         enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,