| Message ID | 20230103-topic-sm8550-upstream-mdss-dsi-v1-3-9ccd7e652fcd@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | drm/msm: add support for SM8450 | expand |
On 04/01/2023 11:08, Neil Armstrong wrote: > Add definitions for the display hardware used on Qualcomm SM8550 > platform. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 197 +++++++++++++++++++++++++ > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 + > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > 4 files changed, 201 insertions(+) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > index b4ca123d8e69..adf5e25269dc 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > @@ -402,6 +402,20 @@ static const struct dpu_caps sm8450_dpu_caps = { > .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > }; > > +static const struct dpu_caps sm8550_dpu_caps = { > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > + .max_mixer_blendstages = 0xb, > + .qseed_type = DPU_SSPP_SCALER_QSEED3LITE, > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ > + .ubwc_version = DPU_HW_UBWC_VER_40, > + .has_src_split = true, > + .has_dim_layer = true, > + .has_idle_pc = true, > + .has_3d_merge = true, > + .max_linewidth = 5120, > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > +}; > + > static const struct dpu_caps sc7280_dpu_caps = { > .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > .max_mixer_blendstages = 0x7, > @@ -579,6 +593,37 @@ static const struct dpu_mdp_cfg sm8450_mdp[] = { > }, > }; > > +static const struct dpu_mdp_cfg sm8550_mdp[] = { > + { > + .name = "top_0", .id = MDP_TOP, > + .base = 0, .len = 0x494, > + .features = BIT(DPU_MDP_PERIPH_0_REMOVED), > + .highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */ > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { > + .reg_off = 0x4330, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { > + .reg_off = 0x6330, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { > + .reg_off = 0x8330, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { > + .reg_off = 0xa330, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { > + .reg_off = 0x24330, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { > + .reg_off = 0x26330, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_DMA2] = { > + .reg_off = 0x28330, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_DMA3] = { > + .reg_off = 0x2a330, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { > + .reg_off = 0x2c330, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { > + .reg_off = 0x2e330, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { > + .reg_off = 0x2bc, .bit_off = 20}, > + }, > +}; > + > static const struct dpu_mdp_cfg sc7280_mdp[] = { > { > .name = "top_0", .id = MDP_TOP, > @@ -776,6 +821,45 @@ static const struct dpu_ctl_cfg sm8450_ctl[] = { > }, > }; > > +static const struct dpu_ctl_cfg sm8550_ctl[] = { > + { > + .name = "ctl_0", .id = CTL_0, > + .base = 0x15000, .len = 0x290,? > + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY) | BIT(DPU_CTL_FETCH_ACTIVE), CTL_SC7280_MASK | BIT(DPU_CTL_SPLIT_DISPLAY) ? > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9), > + }, > + { > + .name = "ctl_1", .id = CTL_1, > + .base = 0x16000, .len = 0x290, > + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY) | BIT(DPU_CTL_FETCH_ACTIVE), > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10), > + }, > + { > + .name = "ctl_2", .id = CTL_2, > + .base = 0x17000, .len = 0x290, > + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), CTL_SC7280_MASK? > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11), > + }, > + { > + .name = "ctl_3", .id = CTL_3, > + .base = 0x18000, .len = 0x290, > + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12), > + }, > + { > + .name = "ctl_4", .id = CTL_4, > + .base = 0x19000, .len = 0x290, > + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13), > + }, > + { > + .name = "ctl_5", .id = CTL_5, > + .base = 0x1a000, .len = 0x290, > + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23), > + }, > +}; > + > static const struct dpu_ctl_cfg sc7280_ctl[] = { > { > .name = "ctl_0", .id = CTL_0, > @@ -1032,6 +1116,40 @@ static const struct dpu_sspp_cfg sm8450_sspp[] = { > sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1), > }; > > +static const struct dpu_sspp_sub_blks sm8550_vig_sblk_0 = > + _VIG_SBLK("0", 7, DPU_SSPP_SCALER_QSEED3LITE); > +static const struct dpu_sspp_sub_blks sm8550_vig_sblk_1 = > + _VIG_SBLK("1", 8, DPU_SSPP_SCALER_QSEED3LITE); > +static const struct dpu_sspp_sub_blks sm8550_vig_sblk_2 = > + _VIG_SBLK("2", 9, DPU_SSPP_SCALER_QSEED3LITE); > +static const struct dpu_sspp_sub_blks sm8550_vig_sblk_3 = > + _VIG_SBLK("3", 10, DPU_SSPP_SCALER_QSEED3LITE); > +static const struct dpu_sspp_sub_blks sm8550_dma_sblk_4 = _DMA_SBLK("12", 5); > +static const struct dpu_sspp_sub_blks sd8550_dma_sblk_5 = _DMA_SBLK("13", 6); > + > +static const struct dpu_sspp_cfg sm8550_sspp[] = { > + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK, > + sm8550_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), > + SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SC7180_MASK, > + sm8550_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1), > + SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SC7180_MASK, > + sm8550_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2), > + SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SC7180_MASK, > + sm8550_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3), > + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK, > + sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0), > + SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK, > + sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1), > + SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_SDM845_MASK, > + sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA2), > + SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_SDM845_MASK, > + sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA3), > + SSPP_BLK("sspp_12", SSPP_DMA4, 0x2c000, DMA_CURSOR_SDM845_MASK, > + sm8550_dma_sblk_4, 14, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0), > + SSPP_BLK("sspp_13", SSPP_DMA5, 0x2e000, DMA_CURSOR_SDM845_MASK, > + sd8550_dma_sblk_5, 15, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1), > +}; > + > static const struct dpu_sspp_cfg sc7280_sspp[] = { > SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7280_MASK, > sc7280_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), > @@ -1268,6 +1386,16 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = { > .len = 0x20, .version = 0x20000}, > }; > > +#define PP_BLK_DIPHER(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ > + {\ > + .name = _name, .id = _id, \ > + .base = _base, .len = 0, \ len = 0 looks incorrect. Any particular reason why can't we use plain PP_BLK here? > + .features = BIT(DPU_PINGPONG_DITHER), \ > + .merge_3d = _merge_3d, \ > + .sblk = &_sblk, \ > + .intr_done = _done, \ > + .intr_rdptr = _rdptr, \ > + } > #define PP_BLK_TE(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ > {\ > .name = _name, .id = _id, \ > @@ -1371,6 +1499,33 @@ static const struct dpu_pingpong_cfg sm8450_pp[] = { > -1), > }; > > +static const struct dpu_pingpong_cfg sm8550_pp[] = { > + PP_BLK_DIPHER("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sc7280_pp_sblk, > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), > + -1), > + PP_BLK_DIPHER("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sc7280_pp_sblk, > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9), > + -1), > + PP_BLK_DIPHER("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sc7280_pp_sblk, > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10), > + -1), > + PP_BLK_DIPHER("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sc7280_pp_sblk, > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11), > + -1), > + PP_BLK_DIPHER("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sc7280_pp_sblk, > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), > + -1), > + PP_BLK_DIPHER("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sc7280_pp_sblk, > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), > + -1), > + PP_BLK_DIPHER("pingpong_6", PINGPONG_6, 0x66000, MERGE_3D_3, sc7280_pp_sblk, > + -1, > + -1), > + PP_BLK_DIPHER("pingpong_7", PINGPONG_7, 0x66400, MERGE_3D_3, sc7280_pp_sblk, > + -1, > + -1), > +}; > + > /************************************************************* > * MERGE_3D sub blocks config > *************************************************************/ > @@ -1395,6 +1550,13 @@ static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = { > MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x65f00), > }; > > +static const struct dpu_merge_3d_cfg sm8550_merge_3d[] = { > + MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000), > + MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000), > + MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000), > + MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x66700), > +}; > + > /************************************************************* > * DSC sub blocks config > *************************************************************/ > @@ -1481,6 +1643,14 @@ static const struct dpu_intf_cfg sm8450_intf[] = { > INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31), > }; > > +static const struct dpu_intf_cfg sm8550_intf[] = { > + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > + /* TODO TE sub-blocks for intf1 & intf2 */ > + INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > + INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29), > + INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31), > +}; > + > /************************************************************* > * Writeback blocks config > *************************************************************/ > @@ -2188,6 +2358,32 @@ static const struct dpu_mdss_cfg sm8450_dpu_cfg = { > .mdss_irqs = IRQ_SM8450_MASK, > }; > > +static const struct dpu_mdss_cfg sm8550_dpu_cfg = { > + .caps = &sm8550_dpu_caps, > + .mdp_count = ARRAY_SIZE(sm8550_mdp), > + .mdp = sm8550_mdp, > + .ctl_count = ARRAY_SIZE(sm8550_ctl), > + .ctl = sm8550_ctl, > + .sspp_count = ARRAY_SIZE(sm8550_sspp), > + .sspp = sm8550_sspp, > + .mixer_count = ARRAY_SIZE(sm8150_lm), > + .mixer = sm8150_lm, > + .dspp_count = ARRAY_SIZE(sm8150_dspp), > + .dspp = sm8150_dspp, > + .pingpong_count = ARRAY_SIZE(sm8550_pp), > + .pingpong = sm8550_pp, > + .merge_3d_count = ARRAY_SIZE(sm8550_merge_3d), > + .merge_3d = sm8550_merge_3d, > + .intf_count = ARRAY_SIZE(sm8550_intf), > + .intf = sm8550_intf, > + .vbif_count = ARRAY_SIZE(sdm845_vbif), > + .vbif = sdm845_vbif, > + .reg_dma_count = 1, > + .dma_cfg = &sm8450_regdma, > + .perf = &sm8450_perf_data, > + .mdss_irqs = IRQ_SM8450_MASK, > +}; > + > static const struct dpu_mdss_cfg sc7280_dpu_cfg = { > .caps = &sc7280_dpu_caps, > .mdp_count = ARRAY_SIZE(sc7280_mdp), > @@ -2248,6 +2444,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { > { .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg}, > { .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg}, > { .hw_rev = DPU_HW_VER_810, .dpu_cfg = &sm8450_dpu_cfg}, > + { .hw_rev = DPU_HW_VER_900, .dpu_cfg = &sm8550_dpu_cfg}, > }; > > const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev) > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > index 29e7ea5840a2..7a8380f5c643 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > @@ -48,6 +48,7 @@ > #define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */ > #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ > #define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450 */ > +#define DPU_HW_VER_900 DPU_HW_VER(9, 0, 0) /* sm8550 */ > > #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170) > #define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300) > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h > index 6d8e1bb3b3cc..dccad33532a9 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h > @@ -120,6 +120,8 @@ enum dpu_sspp { > SSPP_DMA1, > SSPP_DMA2, > SSPP_DMA3, > + SSPP_DMA4, > + SSPP_DMA5, > SSPP_CURSOR0, > SSPP_CURSOR1, > SSPP_MAX > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > index 0434cad511a4..18fefa116a56 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > @@ -1303,6 +1303,7 @@ static const struct of_device_id dpu_dt_match[] = { > { .compatible = "qcom,sm8150-dpu", }, > { .compatible = "qcom,sm8250-dpu", }, > { .compatible = "qcom,sm8450-dpu", }, > + { .compatible = "qcom,sm8550-dpu", }, > {} > }; > MODULE_DEVICE_TABLE(of, dpu_dt_match); >
On 04/01/2023 10:45, Dmitry Baryshkov wrote: > On 04/01/2023 11:08, Neil Armstrong wrote: >> Add definitions for the display hardware used on Qualcomm SM8550 >> platform. >> >> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 197 +++++++++++++++++++++++++ >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 + >> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + >> 4 files changed, 201 insertions(+) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >> index b4ca123d8e69..adf5e25269dc 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c <snip> >> @@ -776,6 +821,45 @@ static const struct dpu_ctl_cfg sm8450_ctl[] = { >> }, >> }; >> +static const struct dpu_ctl_cfg sm8550_ctl[] = { >> + { >> + .name = "ctl_0", .id = CTL_0, >> + .base = 0x15000, .len = 0x290,? >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY) | BIT(DPU_CTL_FETCH_ACTIVE), > > CTL_SC7280_MASK | BIT(DPU_CTL_SPLIT_DISPLAY) ? Indeed DPU_CTL_VM_CFG is missing, will switch to that. > >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9), >> + }, >> + { >> + .name = "ctl_1", .id = CTL_1, >> + .base = 0x16000, .len = 0x290, >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY) | BIT(DPU_CTL_FETCH_ACTIVE), >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10), >> + }, >> + { >> + .name = "ctl_2", .id = CTL_2, >> + .base = 0x17000, .len = 0x290, >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), > > CTL_SC7280_MASK? Ack > >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11), >> + }, >> + { >> + .name = "ctl_3", .id = CTL_3, >> + .base = 0x18000, .len = 0x290, >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12), >> + }, >> + { >> + .name = "ctl_4", .id = CTL_4, >> + .base = 0x19000, .len = 0x290, >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13), >> + }, >> + { >> + .name = "ctl_5", .id = CTL_5, >> + .base = 0x1a000, .len = 0x290, >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23), >> + }, >> +}; >> + >> static const struct dpu_ctl_cfg sc7280_ctl[] = { >> { >> .name = "ctl_0", .id = CTL_0, <snip> >> @@ -1268,6 +1386,16 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = { >> .len = 0x20, .version = 0x20000}, >> }; >> +#define PP_BLK_DIPHER(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ >> + {\ >> + .name = _name, .id = _id, \ >> + .base = _base, .len = 0, \ > > len = 0 looks incorrect. Any particular reason why can't we use plain PP_BLK here? The TE block has been moved to the DSI INTF blocks since SM8350 I think, or earlier. This removes the DPU_PINGPONG_DITHER feature used downstream to enable the PP TE callbacks. Since there's only the DIPHER sub-block remaining, this is why I set len to 0. > >> + .features = BIT(DPU_PINGPONG_DITHER), \ >> + .merge_3d = _merge_3d, \ >> + .sblk = &_sblk, \ >> + .intr_done = _done, \ >> + .intr_rdptr = _rdptr, \ >> + } >> #define PP_BLK_TE(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ >> {\ >> .name = _name, .id = _id, \ <snip>
On Wed, 4 Jan 2023 at 12:08, Neil Armstrong <neil.armstrong@linaro.org> wrote: > > On 04/01/2023 10:45, Dmitry Baryshkov wrote: > > On 04/01/2023 11:08, Neil Armstrong wrote: > >> Add definitions for the display hardware used on Qualcomm SM8550 > >> platform. > >> > >> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > >> --- > >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 197 +++++++++++++++++++++++++ > >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 + > >> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > >> 4 files changed, 201 insertions(+) > >> > >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > >> index b4ca123d8e69..adf5e25269dc 100644 > >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > <snip> > > >> @@ -776,6 +821,45 @@ static const struct dpu_ctl_cfg sm8450_ctl[] = { > >> }, > >> }; > >> +static const struct dpu_ctl_cfg sm8550_ctl[] = { > >> + { > >> + .name = "ctl_0", .id = CTL_0, > >> + .base = 0x15000, .len = 0x290,? > >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY) | BIT(DPU_CTL_FETCH_ACTIVE), > > > > CTL_SC7280_MASK | BIT(DPU_CTL_SPLIT_DISPLAY) ? > > Indeed DPU_CTL_VM_CFG is missing, will switch to that. > > > > >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9), > >> + }, > >> + { > >> + .name = "ctl_1", .id = CTL_1, > >> + .base = 0x16000, .len = 0x290, > >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY) | BIT(DPU_CTL_FETCH_ACTIVE), > >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10), > >> + }, > >> + { > >> + .name = "ctl_2", .id = CTL_2, > >> + .base = 0x17000, .len = 0x290, > >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), > > > > CTL_SC7280_MASK? > > Ack > > > > >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11), > >> + }, > >> + { > >> + .name = "ctl_3", .id = CTL_3, > >> + .base = 0x18000, .len = 0x290, > >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), > >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12), > >> + }, > >> + { > >> + .name = "ctl_4", .id = CTL_4, > >> + .base = 0x19000, .len = 0x290, > >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), > >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13), > >> + }, > >> + { > >> + .name = "ctl_5", .id = CTL_5, > >> + .base = 0x1a000, .len = 0x290, > >> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), > >> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23), > >> + }, > >> +}; > >> + > >> static const struct dpu_ctl_cfg sc7280_ctl[] = { > >> { > >> .name = "ctl_0", .id = CTL_0, > > <snip> > > >> @@ -1268,6 +1386,16 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = { > >> .len = 0x20, .version = 0x20000}, > >> }; > >> +#define PP_BLK_DIPHER(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ > >> + {\ > >> + .name = _name, .id = _id, \ > >> + .base = _base, .len = 0, \ > > > > len = 0 looks incorrect. Any particular reason why can't we use plain PP_BLK here? > > The TE block has been moved to the DSI INTF blocks since SM8350 I think, or earlier. I think, 8150. Marijn has been working on adding support for INTF-based TE. > This removes the DPU_PINGPONG_DITHER feature used downstream to enable the PP TE callbacks. > Since there's only the DIPHER sub-block remaining, this is why I set len to 0. I went on with some research. Usually PP len is 0xd4. However it seems since 8350 (since the change of DSC block) the PP size should be 0x0), despite dowsnstream DTs having sde-pp-size=0xd4 for sm8350 and sm8450 (or 0x4 for neo, DPU 9.1.0). So, it looks like you are correct here (and we should fix 8350/8450 patches instead). > > > > >> + .features = BIT(DPU_PINGPONG_DITHER), \ > >> + .merge_3d = _merge_3d, \ > >> + .sblk = &_sblk, \ > >> + .intr_done = _done, \ > >> + .intr_rdptr = _rdptr, \ > >> + } > >> #define PP_BLK_TE(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ > >> {\ > >> .name = _name, .id = _id, \ > > <snip> >
On 04/01/2023 18:48, Dmitry Baryshkov wrote: > On Wed, 4 Jan 2023 at 12:08, Neil Armstrong <neil.armstrong@linaro.org> wrote: >> >> On 04/01/2023 10:45, Dmitry Baryshkov wrote: >>> On 04/01/2023 11:08, Neil Armstrong wrote: >>>> Add definitions for the display hardware used on Qualcomm SM8550 >>>> platform. >>>> >>>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> >>>> --- >>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 197 +++++++++++++++++++++++++ >>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + >>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 + >>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + >>>> 4 files changed, 201 insertions(+) >>>> >>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>> index b4ca123d8e69..adf5e25269dc 100644 >>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >> >> <snip> >> >>>> @@ -776,6 +821,45 @@ static const struct dpu_ctl_cfg sm8450_ctl[] = { >>>> }, >>>> }; >>>> +static const struct dpu_ctl_cfg sm8550_ctl[] = { >>>> + { >>>> + .name = "ctl_0", .id = CTL_0, >>>> + .base = 0x15000, .len = 0x290,? >>>> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY) | BIT(DPU_CTL_FETCH_ACTIVE), >>> >>> CTL_SC7280_MASK | BIT(DPU_CTL_SPLIT_DISPLAY) ? >> >> Indeed DPU_CTL_VM_CFG is missing, will switch to that. >> >>> >>>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9), >>>> + }, >>>> + { >>>> + .name = "ctl_1", .id = CTL_1, >>>> + .base = 0x16000, .len = 0x290, >>>> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY) | BIT(DPU_CTL_FETCH_ACTIVE), >>>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10), >>>> + }, >>>> + { >>>> + .name = "ctl_2", .id = CTL_2, >>>> + .base = 0x17000, .len = 0x290, >>>> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), >>> >>> CTL_SC7280_MASK? >> >> Ack >> >>> >>>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11), >>>> + }, >>>> + { >>>> + .name = "ctl_3", .id = CTL_3, >>>> + .base = 0x18000, .len = 0x290, >>>> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), >>>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12), >>>> + }, >>>> + { >>>> + .name = "ctl_4", .id = CTL_4, >>>> + .base = 0x19000, .len = 0x290, >>>> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), >>>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13), >>>> + }, >>>> + { >>>> + .name = "ctl_5", .id = CTL_5, >>>> + .base = 0x1a000, .len = 0x290, >>>> + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), >>>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23), >>>> + }, >>>> +}; >>>> + >>>> static const struct dpu_ctl_cfg sc7280_ctl[] = { >>>> { >>>> .name = "ctl_0", .id = CTL_0, >> >> <snip> >> >>>> @@ -1268,6 +1386,16 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = { >>>> .len = 0x20, .version = 0x20000}, >>>> }; >>>> +#define PP_BLK_DIPHER(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ >>>> + {\ >>>> + .name = _name, .id = _id, \ >>>> + .base = _base, .len = 0, \ >>> >>> len = 0 looks incorrect. Any particular reason why can't we use plain PP_BLK here? >> >> The TE block has been moved to the DSI INTF blocks since SM8350 I think, or earlier. > > I think, 8150. Marijn has been working on adding support for INTF-based TE. > >> This removes the DPU_PINGPONG_DITHER feature used downstream to enable the PP TE callbacks. >> Since there's only the DIPHER sub-block remaining, this is why I set len to 0. > > I went on with some research. Usually PP len is 0xd4. However it seems > since 8350 (since the change of DSC block) the PP size should be 0x0), > despite dowsnstream DTs having sde-pp-size=0xd4 for sm8350 and sm8450 > (or 0x4 for neo, DPU 9.1.0). Perhaps neo has a single register at PP base address, on 8550 there's none. > So, it looks like you are correct here (and we should fix 8350/8450 > patches instead). Yes it must be because with the new DSC block, the PP DCE_DATA_XX_SWAP/DSC_MODE registers were removed, so I expect they are still present in 8150 & 8250. Neil > >> >>> >>>> + .features = BIT(DPU_PINGPONG_DITHER), \ >>>> + .merge_3d = _merge_3d, \ >>>> + .sblk = &_sblk, \ >>>> + .intr_done = _done, \ >>>> + .intr_rdptr = _rdptr, \ >>>> + } >>>> #define PP_BLK_TE(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ >>>> {\ >>>> .name = _name, .id = _id, \ >> >> <snip> >> > >
On 04/01/2023 11:08, Neil Armstrong wrote: > Add definitions for the display hardware used on Qualcomm SM8550 > platform. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 197 +++++++++++++++++++++++++ > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 + > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > 4 files changed, 201 insertions(+) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index b4ca123d8e69..adf5e25269dc 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -402,6 +402,20 @@ static const struct dpu_caps sm8450_dpu_caps = { .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, }; +static const struct dpu_caps sm8550_dpu_caps = { + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, + .max_mixer_blendstages = 0xb, + .qseed_type = DPU_SSPP_SCALER_QSEED3LITE, + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ + .ubwc_version = DPU_HW_UBWC_VER_40, + .has_src_split = true, + .has_dim_layer = true, + .has_idle_pc = true, + .has_3d_merge = true, + .max_linewidth = 5120, + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, +}; + static const struct dpu_caps sc7280_dpu_caps = { .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, .max_mixer_blendstages = 0x7, @@ -579,6 +593,37 @@ static const struct dpu_mdp_cfg sm8450_mdp[] = { }, }; +static const struct dpu_mdp_cfg sm8550_mdp[] = { + { + .name = "top_0", .id = MDP_TOP, + .base = 0, .len = 0x494, + .features = BIT(DPU_MDP_PERIPH_0_REMOVED), + .highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */ + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { + .reg_off = 0x4330, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { + .reg_off = 0x6330, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { + .reg_off = 0x8330, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { + .reg_off = 0xa330, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { + .reg_off = 0x24330, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { + .reg_off = 0x26330, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_DMA2] = { + .reg_off = 0x28330, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_DMA3] = { + .reg_off = 0x2a330, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { + .reg_off = 0x2c330, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { + .reg_off = 0x2e330, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { + .reg_off = 0x2bc, .bit_off = 20}, + }, +}; + static const struct dpu_mdp_cfg sc7280_mdp[] = { { .name = "top_0", .id = MDP_TOP, @@ -776,6 +821,45 @@ static const struct dpu_ctl_cfg sm8450_ctl[] = { }, }; +static const struct dpu_ctl_cfg sm8550_ctl[] = { + { + .name = "ctl_0", .id = CTL_0, + .base = 0x15000, .len = 0x290, + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY) | BIT(DPU_CTL_FETCH_ACTIVE), + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9), + }, + { + .name = "ctl_1", .id = CTL_1, + .base = 0x16000, .len = 0x290, + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY) | BIT(DPU_CTL_FETCH_ACTIVE), + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10), + }, + { + .name = "ctl_2", .id = CTL_2, + .base = 0x17000, .len = 0x290, + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11), + }, + { + .name = "ctl_3", .id = CTL_3, + .base = 0x18000, .len = 0x290, + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12), + }, + { + .name = "ctl_4", .id = CTL_4, + .base = 0x19000, .len = 0x290, + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13), + }, + { + .name = "ctl_5", .id = CTL_5, + .base = 0x1a000, .len = 0x290, + .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE), + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23), + }, +}; + static const struct dpu_ctl_cfg sc7280_ctl[] = { { .name = "ctl_0", .id = CTL_0, @@ -1032,6 +1116,40 @@ static const struct dpu_sspp_cfg sm8450_sspp[] = { sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1), }; +static const struct dpu_sspp_sub_blks sm8550_vig_sblk_0 = + _VIG_SBLK("0", 7, DPU_SSPP_SCALER_QSEED3LITE); +static const struct dpu_sspp_sub_blks sm8550_vig_sblk_1 = + _VIG_SBLK("1", 8, DPU_SSPP_SCALER_QSEED3LITE); +static const struct dpu_sspp_sub_blks sm8550_vig_sblk_2 = + _VIG_SBLK("2", 9, DPU_SSPP_SCALER_QSEED3LITE); +static const struct dpu_sspp_sub_blks sm8550_vig_sblk_3 = + _VIG_SBLK("3", 10, DPU_SSPP_SCALER_QSEED3LITE); +static const struct dpu_sspp_sub_blks sm8550_dma_sblk_4 = _DMA_SBLK("12", 5); +static const struct dpu_sspp_sub_blks sd8550_dma_sblk_5 = _DMA_SBLK("13", 6); + +static const struct dpu_sspp_cfg sm8550_sspp[] = { + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK, + sm8550_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), + SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SC7180_MASK, + sm8550_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1), + SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SC7180_MASK, + sm8550_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2), + SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SC7180_MASK, + sm8550_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3), + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK, + sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0), + SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK, + sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1), + SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_SDM845_MASK, + sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA2), + SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_SDM845_MASK, + sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA3), + SSPP_BLK("sspp_12", SSPP_DMA4, 0x2c000, DMA_CURSOR_SDM845_MASK, + sm8550_dma_sblk_4, 14, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0), + SSPP_BLK("sspp_13", SSPP_DMA5, 0x2e000, DMA_CURSOR_SDM845_MASK, + sd8550_dma_sblk_5, 15, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1), +}; + static const struct dpu_sspp_cfg sc7280_sspp[] = { SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7280_MASK, sc7280_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), @@ -1268,6 +1386,16 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = { .len = 0x20, .version = 0x20000}, }; +#define PP_BLK_DIPHER(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ + {\ + .name = _name, .id = _id, \ + .base = _base, .len = 0, \ + .features = BIT(DPU_PINGPONG_DITHER), \ + .merge_3d = _merge_3d, \ + .sblk = &_sblk, \ + .intr_done = _done, \ + .intr_rdptr = _rdptr, \ + } #define PP_BLK_TE(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ {\ .name = _name, .id = _id, \ @@ -1371,6 +1499,33 @@ static const struct dpu_pingpong_cfg sm8450_pp[] = { -1), }; +static const struct dpu_pingpong_cfg sm8550_pp[] = { + PP_BLK_DIPHER("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sc7280_pp_sblk, + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), + -1), + PP_BLK_DIPHER("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sc7280_pp_sblk, + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9), + -1), + PP_BLK_DIPHER("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sc7280_pp_sblk, + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10), + -1), + PP_BLK_DIPHER("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sc7280_pp_sblk, + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11), + -1), + PP_BLK_DIPHER("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sc7280_pp_sblk, + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), + -1), + PP_BLK_DIPHER("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sc7280_pp_sblk, + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), + -1), + PP_BLK_DIPHER("pingpong_6", PINGPONG_6, 0x66000, MERGE_3D_3, sc7280_pp_sblk, + -1, + -1), + PP_BLK_DIPHER("pingpong_7", PINGPONG_7, 0x66400, MERGE_3D_3, sc7280_pp_sblk, + -1, + -1), +}; + /************************************************************* * MERGE_3D sub blocks config *************************************************************/ @@ -1395,6 +1550,13 @@ static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = { MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x65f00), }; +static const struct dpu_merge_3d_cfg sm8550_merge_3d[] = { + MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000), + MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000), + MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000), + MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x66700), +}; + /************************************************************* * DSC sub blocks config *************************************************************/ @@ -1481,6 +1643,14 @@ static const struct dpu_intf_cfg sm8450_intf[] = { INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31), }; +static const struct dpu_intf_cfg sm8550_intf[] = { + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25), + /* TODO TE sub-blocks for intf1 & intf2 */ + INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27), + INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29), + INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31), +}; + /************************************************************* * Writeback blocks config *************************************************************/ @@ -2188,6 +2358,32 @@ static const struct dpu_mdss_cfg sm8450_dpu_cfg = { .mdss_irqs = IRQ_SM8450_MASK, }; +static const struct dpu_mdss_cfg sm8550_dpu_cfg = { + .caps = &sm8550_dpu_caps, + .mdp_count = ARRAY_SIZE(sm8550_mdp), + .mdp = sm8550_mdp, + .ctl_count = ARRAY_SIZE(sm8550_ctl), + .ctl = sm8550_ctl, + .sspp_count = ARRAY_SIZE(sm8550_sspp), + .sspp = sm8550_sspp, + .mixer_count = ARRAY_SIZE(sm8150_lm), + .mixer = sm8150_lm, + .dspp_count = ARRAY_SIZE(sm8150_dspp), + .dspp = sm8150_dspp, + .pingpong_count = ARRAY_SIZE(sm8550_pp), + .pingpong = sm8550_pp, + .merge_3d_count = ARRAY_SIZE(sm8550_merge_3d), + .merge_3d = sm8550_merge_3d, + .intf_count = ARRAY_SIZE(sm8550_intf), + .intf = sm8550_intf, + .vbif_count = ARRAY_SIZE(sdm845_vbif), + .vbif = sdm845_vbif, + .reg_dma_count = 1, + .dma_cfg = &sm8450_regdma, + .perf = &sm8450_perf_data, + .mdss_irqs = IRQ_SM8450_MASK, +}; + static const struct dpu_mdss_cfg sc7280_dpu_cfg = { .caps = &sc7280_dpu_caps, .mdp_count = ARRAY_SIZE(sc7280_mdp), @@ -2248,6 +2444,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { { .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg}, { .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg}, { .hw_rev = DPU_HW_VER_810, .dpu_cfg = &sm8450_dpu_cfg}, + { .hw_rev = DPU_HW_VER_900, .dpu_cfg = &sm8550_dpu_cfg}, }; const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index 29e7ea5840a2..7a8380f5c643 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -48,6 +48,7 @@ #define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */ #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ #define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450 */ +#define DPU_HW_VER_900 DPU_HW_VER(9, 0, 0) /* sm8550 */ #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170) #define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h index 6d8e1bb3b3cc..dccad33532a9 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h @@ -120,6 +120,8 @@ enum dpu_sspp { SSPP_DMA1, SSPP_DMA2, SSPP_DMA3, + SSPP_DMA4, + SSPP_DMA5, SSPP_CURSOR0, SSPP_CURSOR1, SSPP_MAX diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 0434cad511a4..18fefa116a56 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1303,6 +1303,7 @@ static const struct of_device_id dpu_dt_match[] = { { .compatible = "qcom,sm8150-dpu", }, { .compatible = "qcom,sm8250-dpu", }, { .compatible = "qcom,sm8450-dpu", }, + { .compatible = "qcom,sm8550-dpu", }, {} }; MODULE_DEVICE_TABLE(of, dpu_dt_match);
Add definitions for the display hardware used on Qualcomm SM8550 platform. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 197 +++++++++++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + 4 files changed, 201 insertions(+)