diff mbox series

arm64: dts: qcom: sdm845: correct dynamic power coefficients

Message ID 20230106164344.1845098-1-vincent.guittot@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: sdm845: correct dynamic power coefficients | expand

Commit Message

Vincent Guittot Jan. 6, 2023, 4:43 p.m. UTC
While stressing EAS on my dragonboard RB3, I have noticed that LITTLE cores
where never selected as the most energy efficient CPU whatever the
utilization level of waking task.

energy model framework uses its cost field to estimate the energy with
the formula:

  nrg = cost of the selected OPP * utilization / CPU's max capacity

which ends up selecting the CPU with lowest cost / max capacity ration
as long as the utilization fits in the OPP's capacity.

If we compare the cost of a little OPP with similar capacity of a big OPP
like :
       OPP(kHz)   OPP capacity    cost     max capacity   cost/max capacity
LITTLE 1766400    407             351114   407            863
big    1056000    408             520267   1024           508

This can be interpreted as the LITTLE core consumes 70% more than big core
for the same compute capacity.

According to [1], LITTLE consumes 10% less than big core for Coremark
benchmark at those OPPs. If we consider that everything else stays
unchanged, the dynamic-power-coefficient of LITTLE core should be
only 53% of the current value: 290 * 53% = 154

Set the dynamic-power-coefficient of CPU0-3 to 154 to fix the energy model.

[1] https://github.com/kdrag0n/freqbench/tree/master/results/sdm845/main

Fixes: 0e0a8e35d725 ("arm64: dts: qcom: sdm845: correct dynamic power coefficients")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 65032b94b46d..869bdb9bce6e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -198,7 +198,7 @@  CPU0: cpu@0 {
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -222,7 +222,7 @@  CPU1: cpu@100 {
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -243,7 +243,7 @@  CPU2: cpu@200 {
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -264,7 +264,7 @@  CPU3: cpu@300 {
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,