diff mbox series

[v3,2/3] arm64: dts: qcom: Add device tree for Samsung Galaxy Tab A 9.7 (2015)

Message ID 20230107141911.47229-3-nikita@trvn.ru (mailing list archive)
State Accepted
Headers show
Series Add support for Samsung Galaxy tab A (2015) tablets | expand

Commit Message

Nikita Travkin Jan. 7, 2023, 2:19 p.m. UTC
From: Jasper Korten <jja2000@gmail.com>

The Galaxy Tab A 9.7 (2015) is a Snapdragon 410 based tablet.

This commit introduces basic support for the tablet including the
following features:
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- Regulators
- WCNSS (WiFi/BT)
- GPIO keys
- Fuel gauge
- Touchscreen
- Accelerometer

Part of the DT is split out into a common dtsi since the tablet shares
majority of the design with another variant having a different screen
size.

Signed-off-by: Jasper Korten <jja2000@gmail.com>
Co-developed-by: Siddharth Manthan <siddharth_manthan@outlook.com>
Signed-off-by: Siddharth Manthan <siddharth_manthan@outlook.com>
Co-developed-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../dts/qcom/msm8916-samsung-gt5-common.dtsi  | 296 ++++++++++++++++++
 .../boot/dts/qcom/msm8916-samsung-gt510.dts   | 113 +++++++
 3 files changed, 410 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts

Comments

Konrad Dybcio Jan. 9, 2023, 9:03 a.m. UTC | #1
On 7.01.2023 15:19, Nikita Travkin wrote:
> From: Jasper Korten <jja2000@gmail.com>
> 
> The Galaxy Tab A 9.7 (2015) is a Snapdragon 410 based tablet.
> 
> This commit introduces basic support for the tablet including the
> following features:
> - SDHCI (internal and external storage)
> - USB Device Mode
> - UART
> - Regulators
> - WCNSS (WiFi/BT)
> - GPIO keys
> - Fuel gauge
> - Touchscreen
> - Accelerometer
> 
> Part of the DT is split out into a common dtsi since the tablet shares
> majority of the design with another variant having a different screen
> size.
> 
> Signed-off-by: Jasper Korten <jja2000@gmail.com>
> Co-developed-by: Siddharth Manthan <siddharth_manthan@outlook.com>
> Signed-off-by: Siddharth Manthan <siddharth_manthan@outlook.com>
> Co-developed-by: Nikita Travkin <nikita@trvn.ru>
> Signed-off-by: Nikita Travkin <nikita@trvn.ru>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../dts/qcom/msm8916-samsung-gt5-common.dtsi  | 296 ++++++++++++++++++
>  .../boot/dts/qcom/msm8916-samsung-gt510.dts   | 113 +++++++
>  3 files changed, 410 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index b42362c7be1b..70e3b109aeff 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e5.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e7.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-grandmax.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt510.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
> new file mode 100644
> index 000000000000..d920b7247d82
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
> @@ -0,0 +1,296 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/dts-v1/;
> +
> +#include "msm8916-pm8916.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> +	aliases {
> +		serial0 = &blsp1_uart2;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0";
> +	};
> +
> +	reserved-memory {
> +		/* Additional memory used by Samsung firmware modifications */
> +		tz-apps@85500000 {
> +			reg = <0x0 0x85500000 0x0 0xb00000>;
> +			no-map;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		pinctrl-0 = <&gpio_keys_default>;
> +		pinctrl-names = "default";
> +
> +		label = "GPIO Buttons";
> +
> +		volume-up-button {
> +			label = "Volume Up";
> +			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEUP>;
> +		};
> +
> +		home-button {
> +			label = "Home";
> +			gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_HOMEPAGE>;
> +		};
> +	};
> +
> +	gpio-hall-sensor {
> +		compatible = "gpio-keys";
> +
> +		pinctrl-0 = <&gpio_hall_sensor_default>;
> +		pinctrl-names = "default";
> +
> +		label = "GPIO Hall Effect Sensor";
> +
> +		hall-sensor-switch {
> +			label = "Hall Effect Sensor";
> +			gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <EV_SW>;
> +			linux,code = <SW_LID>;
> +			linux,can-disable;
> +		};
> +	};
> +};
> +
> +&blsp_i2c4 {
> +	status = "okay";
> +
> +	fuelgauge@36 {
> +		compatible = "maxim,max77849-battery";
> +		reg = <0x36>;
> +
> +		maxim,rsns-microohm = <10000>;
> +		maxim,over-heat-temp = <600>;
> +		maxim,over-volt = <4400>;
> +
> +		interrupt-parent = <&msmgpio>;
> +		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
> +
> +		pinctrl-0 = <&fuelgauge_int_default>;
> +		pinctrl-names = "default";
> +	};
> +};
> +
> +&blsp_i2c2 {
> +	status = "okay";
> +
> +	light-sensor@10 {
> +		compatible = "capella,cm3323";
> +		reg = <0x10>;
> +	};
> +
> +	accelerometer@1d {
> +		compatible = "st,lis2hh12";
> +		reg = <0x1d>;
> +
> +		vdd-supply = <&pm8916_l17>;
> +		vddio-supply = <&pm8916_l5>;
> +
> +		interrupt-parent = <&msmgpio>;
> +		interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "INT1";
> +
> +		st,drdy-int-pin = <1>;
> +		mount-matrix = "0", "1", "0",
> +			      "-1", "0", "0",
> +			       "0", "0", "1";
> +
> +		pinctrl-0 = <&accel_int_default>;
> +		pinctrl-names = "default";
> +	};
> +};
> +
> +&blsp1_uart2 {
> +	status = "okay";
> +};
> +
> +&pm8916_resin {
> +	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
> +};
> +
> +/* FIXME: Replace with MAX77849 MUIC when driver is available */
> +&pm8916_usbin {
> +	status = "okay";
> +};
> +
> +&pronto {
> +	status = "okay";
> +
> +	iris {
> +		compatible = "qcom,wcn3660b";
> +	};
> +};
> +
> +&sdhc_1 {
> +	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> +	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> +	pinctrl-names = "default", "sleep";
> +
> +	status = "okay";
> +};
> +
> +&sdhc_2 {
> +	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> +	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> +	pinctrl-names = "default", "sleep";
> +
> +	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> +
> +	status = "okay";
> +};
> +
> +&usb {
> +	dr_mode = "peripheral";
> +	extcon = <&pm8916_usbin>;
> +
> +	status = "okay";
> +};
> +
> +&usb_hs_phy {
> +	extcon = <&pm8916_usbin>;
> +};
> +
> +&smd_rpm_regulators {
> +	vdd_l1_l2_l3-supply = <&pm8916_s3>;
> +	vdd_l4_l5_l6-supply = <&pm8916_s4>;
> +	vdd_l7-supply = <&pm8916_s4>;
> +
> +	s3 {
> +		regulator-min-microvolt = <1200000>;
> +		regulator-max-microvolt = <1300000>;
> +	};
> +
> +	s4 {
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <2100000>;
> +	};
> +
> +	l1 {
> +		regulator-min-microvolt = <1225000>;
> +		regulator-max-microvolt = <1225000>;
> +	};
> +
> +	l2 {
> +		regulator-min-microvolt = <1200000>;
> +		regulator-max-microvolt = <1200000>;
> +	};
> +
> +	l4 {
> +		regulator-min-microvolt = <2050000>;
> +		regulator-max-microvolt = <2050000>;
> +	};
> +
> +	l5 {
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	l6 {
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	l7 {
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	l8 {
> +		regulator-min-microvolt = <2850000>;
> +		regulator-max-microvolt = <2900000>;
> +	};
> +
> +	l9 {
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	l10 {
> +		regulator-min-microvolt = <2700000>;
> +		regulator-max-microvolt = <2800000>;
> +	};
> +
> +	l11 {
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <2950000>;
> +		regulator-system-load = <200000>;
> +		regulator-allow-set-load;
> +	};
> +
> +	l12 {
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <2950000>;
> +	};
> +
> +	l13 {
> +		regulator-min-microvolt = <3075000>;
> +		regulator-max-microvolt = <3075000>;
> +	};
> +
> +	l14 {
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	l15 {
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	l16 {
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	l17 {
> +		regulator-min-microvolt = <2850000>;
> +		regulator-max-microvolt = <2850000>;
> +	};
> +
> +	l18 {
> +		regulator-min-microvolt = <2700000>;
> +		regulator-max-microvolt = <2700000>;
> +	};
> +};
> +
> +&msmgpio {
> +	accel_int_default: accel-int-default-state {
> +		pins = "gpio115";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +
> +	fuelgauge_int_default: fuelgauge-int-default-state {
> +		pins = "gpio121";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +
> +	gpio_keys_default: gpio-keys-default-state {
> +		pins = "gpio107", "gpio109";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-pull-up;
> +	};
> +
> +	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
> +		pins = "gpio52";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
> new file mode 100644
> index 000000000000..607a5dc8a534
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
> @@ -0,0 +1,113 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/dts-v1/;
> +
> +#include "msm8916-samsung-gt5-common.dtsi"
> +
> +/ {
> +	model = "Samsung Galaxy Tab A 9.7 (2015)";
> +	compatible = "samsung,gt510", "qcom,msm8916";
> +	chassis-type = "tablet";
> +
> +	clk_pwm: pwm {
> +		compatible = "clk-pwm";
> +		#pwm-cells = <2>;
> +
> +		clocks = <&gcc GCC_GP2_CLK>;
> +
> +		pinctrl-0 = <&motor_pwm_default>;
> +		pinctrl-names = "default";
> +	};
> +
> +	reg_motor_vdd: regulator-motor-vdd {
> +		compatible = "regulator-fixed";
> +		regulator-name = "motor_vdd";
> +		regulator-min-microvolt = <3000000>;
> +		regulator-max-microvolt = <3000000>;
> +
> +		gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		pinctrl-0 = <&motor_en_default>;
> +		pinctrl-names = "default";
> +	};
> +
> +	reg_tsp_1p8v: regulator-tsp-1p8v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "tsp_1p8v";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +
> +		gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		pinctrl-0 = <&tsp_en_default>;
> +		pinctrl-names = "default";
> +	};
> +
> +	reg_tsp_3p3v: regulator-tsp-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "tsp_3p3v";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +
> +		gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	vibrator {
> +		compatible = "pwm-vibrator";
> +
> +		pwms = <&clk_pwm 0 100000>;
> +		pwm-names = "enable";
> +
> +		vcc-supply = <&reg_motor_vdd>;
> +	};
> +};
> +
> +&blsp_i2c5 {
> +	status = "okay";
> +
> +	touchscreen@4a {
> +		compatible = "atmel,maxtouch";
> +		reg = <0x4a>;
> +		interrupt-parent = <&msmgpio>;
> +		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
> +
> +		vdd-supply = <&reg_tsp_1p8v>;
> +		vdda-supply = <&reg_tsp_3p3v>;
> +
> +		reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>;
> +
> +		pinctrl-0 = <&tsp_int_rst_default>;
> +		pinctrl-names = "default";
> +	};
> +};
> +
> +&msmgpio {
> +	motor_en_default: motor-en-default-state {
> +		pins = "gpio76";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +
> +	motor_pwm_default: motor-pwm-default-state {
> +		pins = "gpio50";
> +		function = "gcc_gp2_clk_a";
> +	};
> +
> +	tsp_en_default: tsp-en-default-state {
> +		pins = "gpio73";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +
> +	tsp_int_rst_default: tsp-int-rst-default-state {
> +		pins = "gpio13", "gpio114";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +};
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index b42362c7be1b..70e3b109aeff 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -19,6 +19,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-grandmax.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt510.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
new file mode 100644
index 000000000000..d920b7247d82
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -0,0 +1,296 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		volume-up-button {
+			label = "Volume Up";
+			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		home-button {
+			label = "Home";
+			gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		hall-sensor-switch {
+			label = "Hall Effect Sensor";
+			gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77849-battery";
+		reg = <0x36>;
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4400>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	light-sensor@10 {
+		compatible = "capella,cm3323";
+		reg = <0x10>;
+	};
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "INT1";
+
+		st,drdy-int-pin = <1>;
+		mount-matrix = "0", "1", "0",
+			      "-1", "0", "0",
+			       "0", "0", "1";
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+/* FIXME: Replace with MAX77849 MUIC when driver is available */
+&pm8916_usbin {
+	status = "okay";
+};
+
+&pronto {
+	status = "okay";
+
+	iris {
+		compatible = "qcom,wcn3660b";
+	};
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "peripheral";
+	extcon = <&pm8916_usbin>;
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+};
+
+&smd_rpm_regulators {
+	vdd_l1_l2_l3-supply = <&pm8916_s3>;
+	vdd_l4_l5_l6-supply = <&pm8916_s4>;
+	vdd_l7-supply = <&pm8916_s4>;
+
+	s3 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1300000>;
+	};
+
+	s4 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2100000>;
+	};
+
+	l1 {
+		regulator-min-microvolt = <1225000>;
+		regulator-max-microvolt = <1225000>;
+	};
+
+	l2 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	l4 {
+		regulator-min-microvolt = <2050000>;
+		regulator-max-microvolt = <2050000>;
+	};
+
+	l5 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l6 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l7 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l8 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	l9 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l10 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	l11 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+		regulator-system-load = <200000>;
+		regulator-allow-set-load;
+	};
+
+	l12 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+	};
+
+	l13 {
+		regulator-min-microvolt = <3075000>;
+		regulator-max-microvolt = <3075000>;
+	};
+
+	l14 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l15 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+
+	l18 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+	};
+};
+
+&msmgpio {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fuelgauge_int_default: fuelgauge-int-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
new file mode 100644
index 000000000000..607a5dc8a534
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
@@ -0,0 +1,113 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-gt5-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab A 9.7 (2015)";
+	compatible = "samsung,gt510", "qcom,msm8916";
+	chassis-type = "tablet";
+
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-0 = <&motor_pwm_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&motor_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&reg_motor_vdd>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&reg_tsp_1p8v>;
+		vdda-supply = <&reg_tsp_3p3v>;
+
+		reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&tsp_int_rst_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&msmgpio {
+	motor_en_default: motor-en-default-state {
+		pins = "gpio76";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	motor_pwm_default: motor-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default: tsp-int-rst-default-state {
+		pins = "gpio13", "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};