@@ -59,7 +59,6 @@ struct lt9611 {
enum drm_connector_status status;
u8 edid_buf[EDID_SEG_SIZE];
- u32 vic;
};
#define LT9611_PAGE_CONTROL 0xff
@@ -352,12 +351,51 @@ static int lt9611_video_check(struct lt9611 *lt9611)
return temp;
}
-static void lt9611_hdmi_tx_digital(struct lt9611 *lt9611, bool is_hdmi)
+static void lt9611_hdmi_set_infoframes(struct lt9611 *lt9611,
+ struct drm_connector *connector,
+ struct drm_display_mode *mode)
{
- regmap_write(lt9611->regmap, 0x8443, 0x46 - lt9611->vic);
- regmap_write(lt9611->regmap, 0x8447, lt9611->vic);
- regmap_write(lt9611->regmap, 0x843d, 0x0a); /* UD1 infoframe */
+ union hdmi_infoframe infoframe;
+ ssize_t len;
+ u8 iframes = 0x0a; /* UD1 infoframe */
+ u8 buf[32];
+ int ret;
+ int i;
+
+ ret = drm_hdmi_avi_infoframe_from_display_mode(&infoframe.avi,
+ connector,
+ mode);
+ if (ret < 0)
+ goto out;
+
+ len = hdmi_infoframe_pack(&infoframe, buf, sizeof(buf));
+ if (len < 0)
+ goto out;
+
+ for (i = 0; i < len; i++)
+ regmap_write(lt9611->regmap, 0x8440 + i, buf[i]);
+
+ ret = drm_hdmi_vendor_infoframe_from_display_mode(&infoframe.vendor.hdmi,
+ connector,
+ mode);
+ if (ret < 0)
+ goto out;
+
+ len = hdmi_infoframe_pack(&infoframe, buf, sizeof(buf));
+ if (len < 0)
+ goto out;
+ for (i = 0; i < len; i++)
+ regmap_write(lt9611->regmap, 0x8474 + i, buf[i]);
+
+ iframes |= 0x20;
+
+out:
+ regmap_write(lt9611->regmap, 0x843d, iframes); /* UD1 infoframe */
+}
+
+static void lt9611_hdmi_tx_digital(struct lt9611 *lt9611, bool is_hdmi)
+{
if (is_hdmi)
regmap_write(lt9611->regmap, 0x82d6, 0x8c);
else
@@ -687,9 +725,7 @@ lt9611_bridge_atomic_enable(struct drm_bridge *bridge,
struct drm_connector_state *conn_state;
struct drm_crtc_state *crtc_state;
struct drm_display_mode *mode;
- struct hdmi_avi_infoframe avi_frame;
unsigned int postdiv;
- int ret;
connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
if (WARN_ON(!connector))
@@ -710,18 +746,13 @@ lt9611_bridge_atomic_enable(struct drm_bridge *bridge,
lt9611_mipi_video_setup(lt9611, mode);
lt9611_pcr_setup(lt9611, mode, postdiv);
- ret = drm_hdmi_avi_infoframe_from_display_mode(&avi_frame,
- connector,
- mode);
- if (!ret)
- lt9611->vic = avi_frame.video_code;
-
if (lt9611_power_on(lt9611)) {
dev_err(lt9611->dev, "power on failed\n");
return;
}
lt9611_mipi_input_analog(lt9611);
+ lt9611_hdmi_set_infoframes(lt9611, connector, mode);
lt9611_hdmi_tx_digital(lt9611, connector->display_info.is_hdmi);
lt9611_hdmi_tx_phy(lt9611);
Rework handling infoframes: - Write full HDMI AVI infoframe instead of just fixing the VIC value - Also send the HDMI Vendor Specific infoframe, as recommended by the HDMI spec. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/bridge/lontium-lt9611.c | 57 +++++++++++++++++++------ 1 file changed, 44 insertions(+), 13 deletions(-)