Message ID | 20230108165656.136871-8-dmitry.baryshkov@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | drm/bridge: lt9611: several fixes and improvements | expand |
On 08/01/2023 17:56, Dmitry Baryshkov wrote: > The mode_set callback is deprectated for drm_bridges in favour of using > atomic_enable callback. Move corresponding code into the function > lt9611_bridge_atomic_enable() and turn lt9611_bridge_pre_enable() into > the proper atomic_pre_enable callback. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/gpu/drm/bridge/lontium-lt9611.c | 61 +++++++++++++++---------- > 1 file changed, 36 insertions(+), 25 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c > index 3b77238ca4af..1b65a573be27 100644 > --- a/drivers/gpu/drm/bridge/lontium-lt9611.c > +++ b/drivers/gpu/drm/bridge/lontium-lt9611.c > @@ -713,6 +713,39 @@ lt9611_bridge_atomic_enable(struct drm_bridge *bridge, > struct drm_bridge_state *old_bridge_state) > { > struct lt9611 *lt9611 = bridge_to_lt9611(bridge); > + struct drm_atomic_state *state = old_bridge_state->base.state; > + struct drm_connector *connector; > + struct drm_connector_state *conn_state; > + struct drm_crtc_state *crtc_state; > + struct drm_display_mode *mode; > + struct hdmi_avi_infoframe avi_frame; > + unsigned int postdiv; > + int ret; > + > + connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder); > + if (WARN_ON(!connector)) > + return; > + > + conn_state = drm_atomic_get_new_connector_state(state, connector); > + if (WARN_ON(!conn_state)) > + return; > + > + crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); > + if (WARN_ON(!crtc_state)) > + return; > + > + mode = &crtc_state->adjusted_mode; > + > + lt9611_mipi_input_digital(lt9611, mode); > + lt9611_pll_setup(lt9611, mode, &postdiv); > + lt9611_mipi_video_setup(lt9611, mode); > + lt9611_pcr_setup(lt9611, mode, postdiv); > + > + ret = drm_hdmi_avi_infoframe_from_display_mode(&avi_frame, > + connector, > + mode); > + if (!ret) > + lt9611->vic = avi_frame.video_code; > > if (lt9611_power_on(lt9611)) { > dev_err(lt9611->dev, "power on failed\n"); > @@ -856,7 +889,8 @@ static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge, > return MODE_OK; > } > > -static void lt9611_bridge_pre_enable(struct drm_bridge *bridge) > +static void lt9611_bridge_atomic_pre_enable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) > { > struct lt9611 *lt9611 = bridge_to_lt9611(bridge); > static const struct reg_sequence reg_cfg[] = { > @@ -884,29 +918,6 @@ lt9611_bridge_atomic_post_disable(struct drm_bridge *bridge, > lt9611_sleep_setup(lt9611); > } > > -static void lt9611_bridge_mode_set(struct drm_bridge *bridge, > - const struct drm_display_mode *mode, > - const struct drm_display_mode *adj_mode) > -{ > - struct lt9611 *lt9611 = bridge_to_lt9611(bridge); > - struct hdmi_avi_infoframe avi_frame; > - unsigned int postdiv; > - int ret; > - > - lt9611_bridge_pre_enable(bridge); > - > - lt9611_mipi_input_digital(lt9611, mode); > - lt9611_pll_setup(lt9611, mode, &postdiv); > - lt9611_mipi_video_setup(lt9611, mode); > - lt9611_pcr_setup(lt9611, mode, postdiv); > - > - ret = drm_hdmi_avi_infoframe_from_display_mode(&avi_frame, > - <9611->connector, > - mode); > - if (!ret) > - lt9611->vic = avi_frame.video_code; > -} > - > static enum drm_connector_status lt9611_bridge_detect(struct drm_bridge *bridge) > { > return __lt9611_detect(bridge_to_lt9611(bridge)); > @@ -957,11 +968,11 @@ lt9611_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > static const struct drm_bridge_funcs lt9611_bridge_funcs = { > .attach = lt9611_bridge_attach, > .mode_valid = lt9611_bridge_mode_valid, > - .mode_set = lt9611_bridge_mode_set, > .detect = lt9611_bridge_detect, > .get_edid = lt9611_bridge_get_edid, > .hpd_enable = lt9611_bridge_hpd_enable, > > + .atomic_pre_enable = lt9611_bridge_atomic_pre_enable, > .atomic_enable = lt9611_bridge_atomic_enable, > .atomic_disable = lt9611_bridge_atomic_disable, > .atomic_post_disable = lt9611_bridge_atomic_post_disable, Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c index 3b77238ca4af..1b65a573be27 100644 --- a/drivers/gpu/drm/bridge/lontium-lt9611.c +++ b/drivers/gpu/drm/bridge/lontium-lt9611.c @@ -713,6 +713,39 @@ lt9611_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_bridge_state *old_bridge_state) { struct lt9611 *lt9611 = bridge_to_lt9611(bridge); + struct drm_atomic_state *state = old_bridge_state->base.state; + struct drm_connector *connector; + struct drm_connector_state *conn_state; + struct drm_crtc_state *crtc_state; + struct drm_display_mode *mode; + struct hdmi_avi_infoframe avi_frame; + unsigned int postdiv; + int ret; + + connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder); + if (WARN_ON(!connector)) + return; + + conn_state = drm_atomic_get_new_connector_state(state, connector); + if (WARN_ON(!conn_state)) + return; + + crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); + if (WARN_ON(!crtc_state)) + return; + + mode = &crtc_state->adjusted_mode; + + lt9611_mipi_input_digital(lt9611, mode); + lt9611_pll_setup(lt9611, mode, &postdiv); + lt9611_mipi_video_setup(lt9611, mode); + lt9611_pcr_setup(lt9611, mode, postdiv); + + ret = drm_hdmi_avi_infoframe_from_display_mode(&avi_frame, + connector, + mode); + if (!ret) + lt9611->vic = avi_frame.video_code; if (lt9611_power_on(lt9611)) { dev_err(lt9611->dev, "power on failed\n"); @@ -856,7 +889,8 @@ static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge, return MODE_OK; } -static void lt9611_bridge_pre_enable(struct drm_bridge *bridge) +static void lt9611_bridge_atomic_pre_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) { struct lt9611 *lt9611 = bridge_to_lt9611(bridge); static const struct reg_sequence reg_cfg[] = { @@ -884,29 +918,6 @@ lt9611_bridge_atomic_post_disable(struct drm_bridge *bridge, lt9611_sleep_setup(lt9611); } -static void lt9611_bridge_mode_set(struct drm_bridge *bridge, - const struct drm_display_mode *mode, - const struct drm_display_mode *adj_mode) -{ - struct lt9611 *lt9611 = bridge_to_lt9611(bridge); - struct hdmi_avi_infoframe avi_frame; - unsigned int postdiv; - int ret; - - lt9611_bridge_pre_enable(bridge); - - lt9611_mipi_input_digital(lt9611, mode); - lt9611_pll_setup(lt9611, mode, &postdiv); - lt9611_mipi_video_setup(lt9611, mode); - lt9611_pcr_setup(lt9611, mode, postdiv); - - ret = drm_hdmi_avi_infoframe_from_display_mode(&avi_frame, - <9611->connector, - mode); - if (!ret) - lt9611->vic = avi_frame.video_code; -} - static enum drm_connector_status lt9611_bridge_detect(struct drm_bridge *bridge) { return __lt9611_detect(bridge_to_lt9611(bridge)); @@ -957,11 +968,11 @@ lt9611_atomic_get_input_bus_fmts(struct drm_bridge *bridge, static const struct drm_bridge_funcs lt9611_bridge_funcs = { .attach = lt9611_bridge_attach, .mode_valid = lt9611_bridge_mode_valid, - .mode_set = lt9611_bridge_mode_set, .detect = lt9611_bridge_detect, .get_edid = lt9611_bridge_get_edid, .hpd_enable = lt9611_bridge_hpd_enable, + .atomic_pre_enable = lt9611_bridge_atomic_pre_enable, .atomic_enable = lt9611_bridge_atomic_enable, .atomic_disable = lt9611_bridge_atomic_disable, .atomic_post_disable = lt9611_bridge_atomic_post_disable,
The mode_set callback is deprectated for drm_bridges in favour of using atomic_enable callback. Move corresponding code into the function lt9611_bridge_atomic_enable() and turn lt9611_bridge_pre_enable() into the proper atomic_pre_enable callback. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/bridge/lontium-lt9611.c | 61 +++++++++++++++---------- 1 file changed, 36 insertions(+), 25 deletions(-)