| Message ID | 20230110121316.24892-4-quic_devipriy@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add minimal boot support for IPQ9574 | expand |
On 10/01/2023 13:13, devi priya wrote: > Add device tree binding documentation details for ipq9574 > pinctrl driver > Subject: drop second/last, redundant "bindings". The "dt-bindings" prefix is already stating that these are bindings. > Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> > Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > Signed-off-by: devi priya <quic_devipriy@quicinc.com> > --- > .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml | 129 ++++++++++++++++++ > 1 file changed, 129 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml > new file mode 100644 > index 000000000000..f9cb457bc18d > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml > @@ -0,0 +1,129 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block > + > +maintainers: > + - Anusha <quic_anusha@quicinc.com> > + > +description: | > + This binding describes the Top Level Mode Multiplexer block found in the > + IPQ9574 platform. No, please rebase on recent changes. You started your work on some old bindings so your binding likely includes all issues we fixed. > + > +allOf: > + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# > + > +properties: > + compatible: > + const: qcom,ipq9574-tlmm > + > + reg: > + maxItems: 1 > + > + interrupts: true > + interrupt-controller: true > + "#interrupt-cells": true > + gpio-controller: true > + gpio-reserved-ranges: true > + "#gpio-cells": true > + gpio-ranges: true > + wakeup-parent: true Missing gpio-line-names and constraints for ranges. Look at other bindings. > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +patternProperties: > + "-state$": > + oneOf: > + - $ref: "#/$defs/qcom-ipq9574-tlmm-state" > + - patternProperties: > + "-pins$": > + $ref: "#/$defs/qcom-ipq9574-tlmm-state" > + additionalProperties: false > + > +$defs: > + qcom-ipq9574-tlmm-state: > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + oneOf: > + - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" > + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, > + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, > + qdsd_data3 ] These are ordered by name. > + minItems: 1 > + maxItems: 8 > + > + function: > + description: > + Specify the alternative function to be configured for the specified > + pins. > + > + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, > + audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart, > + blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, > + blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c, > + blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0, > + cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy, > + gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc, > + mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, > + pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1, > + prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21, > + pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13, > + pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32, > + pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, > + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, > + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, > + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, > + dss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data, > + rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max, > + wci20, wci21, wsa_swrm, audio_pdm0 ] These too > + > + bias-disable: true > + bias-pull-down: true > + bias-pull-up: true > + drive-strength: true > + input-enable: true > + output-high: true > + output-low: true > + > + required: > + - pins > + > + additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq9574-tlmm"; > + reg = <0x01000000 0x300000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-ranges = <&tlmm 0 0 65>; > + > + uart2-state { > + pins = "gpio34", "gpio35"; Wrong indentation. > + function = "blsp2_uart"; > + drive-strength = <8>; > + bias-pull-down; > + }; > + }; Best regards, Krzysztof
On 1/11/2023 3:09 PM, Krzysztof Kozlowski wrote: > On 10/01/2023 13:13, devi priya wrote: >> Add device tree binding documentation details for ipq9574 >> pinctrl driver >> > > Subject: drop second/last, redundant "bindings". The "dt-bindings" > prefix is already stating that these are bindings. Sure, okay > >> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> >> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >> Signed-off-by: devi priya <quic_devipriy@quicinc.com> >> --- >> .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml | 129 ++++++++++++++++++ >> 1 file changed, 129 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml >> >> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml >> new file mode 100644 >> index 000000000000..f9cb457bc18d >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml >> @@ -0,0 +1,129 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block >> + >> +maintainers: >> + - Anusha <quic_anusha@quicinc.com> >> + >> +description: | >> + This binding describes the Top Level Mode Multiplexer block found in the >> + IPQ9574 platform. > > No, please rebase on recent changes. You started your work on some old > bindings so your binding likely includes all issues we fixed. Sure, will do > >> + >> +allOf: >> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# >> + >> +properties: >> + compatible: >> + const: qcom,ipq9574-tlmm >> + >> + reg: >> + maxItems: 1 >> + >> + interrupts: true >> + interrupt-controller: true >> + "#interrupt-cells": true >> + gpio-controller: true >> + gpio-reserved-ranges: true >> + "#gpio-cells": true >> + gpio-ranges: true >> + wakeup-parent: true > > Missing gpio-line-names and constraints for ranges. Look at other bindings. Okay > >> + >> +required: >> + - compatible >> + - reg >> + >> +additionalProperties: false >> + >> +patternProperties: >> + "-state$": >> + oneOf: >> + - $ref: "#/$defs/qcom-ipq9574-tlmm-state" >> + - patternProperties: >> + "-pins$": >> + $ref: "#/$defs/qcom-ipq9574-tlmm-state" >> + additionalProperties: false >> + >> +$defs: >> + qcom-ipq9574-tlmm-state: >> + type: object >> + description: >> + Pinctrl node's client devices use subnodes for desired pin configuration. >> + Client device subnodes use below standard properties. >> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state >> + >> + properties: >> + pins: >> + description: >> + List of gpio pins affected by the properties specified in this >> + subnode. >> + items: >> + oneOf: >> + - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" >> + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, >> + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, >> + qdsd_data3 ] > > These are ordered by name. The enum values seem to be ordered alphabetically. could you please help us understand the ordering? > >> + minItems: 1 >> + maxItems: 8 >> + >> + function: >> + description: >> + Specify the alternative function to be configured for the specified >> + pins. >> + >> + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, >> + audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart, >> + blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, >> + blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c, >> + blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0, >> + cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy, >> + gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc, >> + mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, >> + pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1, >> + prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21, >> + pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13, >> + pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32, >> + pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, >> + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, >> + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, >> + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, >> + dss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data, >> + rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max, >> + wci20, wci21, wsa_swrm, audio_pdm0 ] > > These too > >> + >> + bias-disable: true >> + bias-pull-down: true >> + bias-pull-up: true >> + drive-strength: true >> + input-enable: true >> + output-high: true >> + output-low: true >> + >> + required: >> + - pins >> + >> + additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + tlmm: pinctrl@1000000 { >> + compatible = "qcom,ipq9574-tlmm"; >> + reg = <0x01000000 0x300000>; >> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + gpio-ranges = <&tlmm 0 0 65>; >> + >> + uart2-state { >> + pins = "gpio34", "gpio35"; > > Wrong indentation. Okay > >> + function = "blsp2_uart"; >> + drive-strength = <8>; >> + bias-pull-down; >> + }; >> + }; > > Best regards, > Krzysztof > Best Regards, Devi Priya
On 13/01/2023 14:24, Devi Priya wrote: >>> + properties: >>> + pins: >>> + description: >>> + List of gpio pins affected by the properties specified in this >>> + subnode. >>> + items: >>> + oneOf: >>> + - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" >>> + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, >>> + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, >>> + qdsd_data3 ] >> >> These are ordered by name. > The enum values seem to be ordered alphabetically. > could you please help us understand the ordering? q goes before s >> >>> + minItems: 1 >>> + maxItems: 8 >>> + Best regards, Krzysztof
On 1/13/2023 7:46 PM, Krzysztof Kozlowski wrote: > On 13/01/2023 14:24, Devi Priya wrote: >>>> + properties: >>>> + pins: >>>> + description: >>>> + List of gpio pins affected by the properties specified in this >>>> + subnode. >>>> + items: >>>> + oneOf: >>>> + - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" >>>> + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, >>>> + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, >>>> + qdsd_data3 ] >>> >>> These are ordered by name. >> The enum values seem to be ordered alphabetically. >> could you please help us understand the ordering? > > q goes before s Oops! sorry. Will update > >>> >>>> + minItems: 1 >>>> + maxItems: 8 >>>> + > > Best regards, > Krzysztof > Best Regards, Devi Priya
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file mode 100644 index 000000000000..f9cb457bc18d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block + +maintainers: + - Anusha <quic_anusha@quicinc.com> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ9574 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,ipq9574-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + gpio-reserved-ranges: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq9574-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq9574-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq9574-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ] + minItems: 1 + maxItems: 8 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart, + blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, + blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c, + blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0, + cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy, + gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc, + mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, + pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21, + pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13, + pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32, + pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + dss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data, + rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max, + wci20, wci21, wsa_swrm, audio_pdm0 ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + + uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + };