diff mbox series

phy: qcom-qmp: Introduce Kconfig symbols for discrete drivers

Message ID 20230114000910.1256462-1-swboyd@chromium.org (mailing list archive)
State Superseded
Headers show
Series phy: qcom-qmp: Introduce Kconfig symbols for discrete drivers | expand

Commit Message

Stephen Boyd Jan. 14, 2023, 12:09 a.m. UTC
Introduce a config option for each QMP PHY driver now that the QMP PHY
mega-driver has been split up into different modules. This allows kernel
configurators to limit the binary size of the kernel by only compiling
in the QMP PHY driver that they need, or to split the module up into one
per PHY driver instead of one module for all the QMP PHY drivers.

Leave the old config QCOM_QMP in place and make it into a menuconfig so
that 'make olddefconfig' continues to work. Furthermore, set the default
of the new Kconfig symbols to be QCOM_QMP so that the transition is
smooth.

Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/phy/qualcomm/Kconfig  | 50 ++++++++++++++++++++++++++++++++---
 drivers/phy/qualcomm/Makefile | 12 ++++-----
 2 files changed, 52 insertions(+), 10 deletions(-)


base-commit: 30a0b95b1335e12efef89dd78518ed3e4a71a763

Comments

Johan Hovold Jan. 23, 2023, 10:35 a.m. UTC | #1
On Fri, Jan 13, 2023 at 04:09:10PM -0800, Stephen Boyd wrote:
> Introduce a config option for each QMP PHY driver now that the QMP PHY
> mega-driver has been split up into different modules. This allows kernel
> configurators to limit the binary size of the kernel by only compiling
> in the QMP PHY driver that they need, or to split the module up into one
> per PHY driver instead of one module for all the QMP PHY drivers.

Nit: The drivers are already built as separate modules even if they can
currently only be enabled together.

> Leave the old config QCOM_QMP in place and make it into a menuconfig so
> that 'make olddefconfig' continues to work. Furthermore, set the default
> of the new Kconfig symbols to be QCOM_QMP so that the transition is
> smooth.

Perhaps this should go eventually.
 
> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Cc: Johan Hovold <johan+linaro@kernel.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>

Looks good otherwise:

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>

Johan
Dmitry Baryshkov Jan. 23, 2023, 11:07 a.m. UTC | #2
On 14/01/2023 02:09, Stephen Boyd wrote:
> Introduce a config option for each QMP PHY driver now that the QMP PHY
> mega-driver has been split up into different modules. This allows kernel
> configurators to limit the binary size of the kernel by only compiling
> in the QMP PHY driver that they need, or to split the module up into one
> per PHY driver instead of one module for all the QMP PHY drivers.
> 
> Leave the old config QCOM_QMP in place and make it into a menuconfig so
> that 'make olddefconfig' continues to work. Furthermore, set the default
> of the new Kconfig symbols to be QCOM_QMP so that the transition is
> smooth.
> 
> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Cc: Johan Hovold <johan+linaro@kernel.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
>   drivers/phy/qualcomm/Kconfig  | 50 ++++++++++++++++++++++++++++++++---
>   drivers/phy/qualcomm/Makefile | 12 ++++-----
>   2 files changed, 52 insertions(+), 10 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Vinod Koul Feb. 2, 2023, 1:17 p.m. UTC | #3
On 13-01-23, 16:09, Stephen Boyd wrote:
> Introduce a config option for each QMP PHY driver now that the QMP PHY
> mega-driver has been split up into different modules. This allows kernel
> configurators to limit the binary size of the kernel by only compiling
> in the QMP PHY driver that they need, or to split the module up into one
> per PHY driver instead of one module for all the QMP PHY drivers.
> 
> Leave the old config QCOM_QMP in place and make it into a menuconfig so
> that 'make olddefconfig' continues to work. Furthermore, set the default
> of the new Kconfig symbols to be QCOM_QMP so that the transition is
> smooth.

This fails to apply for me, can you please rebase
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index 5c98850f5a36..1d3a8062e651 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -50,13 +50,55 @@  config PHY_QCOM_PCIE2
 	  Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
 	  based PCIe controller.
 
-config PHY_QCOM_QMP
-	tristate "Qualcomm QMP PHY Driver"
+menuconfig PHY_QCOM_QMP
+	tristate "Qualcomm QMP PHY Drivers"
 	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
+
+if PHY_QCOM_QMP
+
+config PHY_QCOM_QMP_COMBO
+	tristate "Qualcomm QMP Combo PHY Driver"
+	default PHY_QCOM_QMP
+	select GENERIC_PHY
+	help
+	  Enable this to support the QMP Combo PHY transceiver that is used
+	  with USB3 and DisplayPort controllers on Qualcomm chips.
+
+config PHY_QCOM_QMP_PCIE
+	tristate "Qualcomm QMP PCIe PHY Driver"
+	depends on PCI || COMPILE_TEST
+	select GENERIC_PHY
+	default PHY_QCOM_QMP
+	help
+	  Enable this to support the QMP PCIe PHY transceiver that is used
+	  with PCIe controllers on Qualcomm chips.
+
+config PHY_QCOM_QMP_PCIE_8996
+	tristate "Qualcomm QMP PCIe 8996 PHY Driver"
+	depends on PCI || COMPILE_TEST
 	select GENERIC_PHY
+	default PHY_QCOM_QMP
 	help
-	  Enable this to support the QMP PHY transceiver that is used
-	  with controllers such as PCIe, UFS, and USB on Qualcomm chips.
+	  Enable this to support the QMP PCIe PHY transceiver that is used
+	  with PCIe controllers on Qualcomm msm8996 chips.
+
+config PHY_QCOM_QMP_UFS
+	tristate "Qualcomm QMP UFS PHY Driver"
+	select GENERIC_PHY
+	default PHY_QCOM_QMP
+	help
+	  Enable this to support the QMP UFS PHY transceiver that is used
+	  with UFS controllers on Qualcomm chips.
+
+config PHY_QCOM_QMP_USB
+	tristate "Qualcomm QMP USB PHY Driver"
+	select GENERIC_PHY
+	default PHY_QCOM_QMP
+	help
+	  Enable this to support the QMP USB PHY transceiver that is used
+	  with USB3 controllers on Qualcomm chips.
+
+endif # PHY_QCOM_QMP
 
 config PHY_QCOM_QUSB2
 	tristate "Qualcomm QUSB2 PHY Driver"
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index 65f6c30a3e93..79dd4e507961 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -5,12 +5,12 @@  obj-$(CONFIG_PHY_QCOM_EDP)		+= phy-qcom-edp.o
 obj-$(CONFIG_PHY_QCOM_IPQ4019_USB)	+= phy-qcom-ipq4019-usb.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_QCOM_PCIE2)		+= phy-qcom-pcie2.o
-obj-$(CONFIG_PHY_QCOM_QMP)		+= \
-	phy-qcom-qmp-combo.o \
-	phy-qcom-qmp-pcie.o \
-	phy-qcom-qmp-pcie-msm8996.o \
-	phy-qcom-qmp-ufs.o \
-	phy-qcom-qmp-usb.o
+
+obj-$(CONFIG_PHY_QCOM_QMP_COMBO)	+= phy-qcom-qmp-combo.o
+obj-$(CONFIG_PHY_QCOM_QMP_PCIE)		+= phy-qcom-qmp-pcie.o
+obj-$(CONFIG_PHY_QCOM_QMP_PCIE_8996)	+= phy-qcom-qmp-pcie-msm8996.o
+obj-$(CONFIG_PHY_QCOM_QMP_UFS)		+= phy-qcom-qmp-ufs.o
+obj-$(CONFIG_PHY_QCOM_QMP_USB)		+= phy-qcom-qmp-usb.o
 
 obj-$(CONFIG_PHY_QCOM_QUSB2)		+= phy-qcom-qusb2.o
 obj-$(CONFIG_PHY_QCOM_USB_HS) 		+= phy-qcom-usb-hs.o