diff mbox series

[2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex

Message ID 20230118173932.358153-2-krzysztof.kozlowski@linaro.org (mailing list archive)
State Superseded
Headers show
Series [1/2] spi: dt-bindings: drop unneeded quotes | expand

Commit Message

Krzysztof Kozlowski Jan. 18, 2023, 5:39 p.m. UTC
Cleanup examples:
 - use 4-space indentation (for cases when it is neither 4 not 2 space),
 - drop redundant blank lines,
 - use lowercase hex.

No functional impact except adjusting to preferred coding style.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/spi/amlogic,meson-gx-spicc.yaml  |  26 +--
 .../bindings/spi/amlogic,meson6-spifc.yaml    |  22 +--
 .../bindings/spi/aspeed,ast2600-fmc.yaml      |  24 +--
 .../bindings/spi/brcm,spi-bcm-qspi.yaml       | 156 +++++++++---------
 .../bindings/spi/cdns,qspi-nor.yaml           |   4 +-
 .../bindings/spi/nvidia,tegra210-quad.yaml    |  42 ++---
 .../bindings/spi/qcom,spi-qcom-qspi.yaml      |   1 -
 .../devicetree/bindings/spi/renesas,rspi.yaml |  22 +--
 .../bindings/spi/spi-sunplus-sp7021.yaml      |   4 +-
 .../devicetree/bindings/spi/st,stm32-spi.yaml |   1 -
 10 files changed, 150 insertions(+), 152 deletions(-)

Comments

Geert Uytterhoeven Jan. 18, 2023, 7:04 p.m. UTC | #1
On Wed, Jan 18, 2023 at 6:39 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
> Cleanup examples:
>  - use 4-space indentation (for cases when it is neither 4 not 2 space),
>  - drop redundant blank lines,
>  - use lowercase hex.
>
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

>  .../devicetree/bindings/spi/renesas,rspi.yaml |  22 +--

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Andrew Jeffery Jan. 19, 2023, 4:44 a.m. UTC | #2
On Thu, 19 Jan 2023, at 04:09, Krzysztof Kozlowski wrote:
> Cleanup examples:
>  - use 4-space indentation (for cases when it is neither 4 not 2 space),
>  - drop redundant blank lines,
>  - use lowercase hex.
>
> No functional impact except adjusting to preferred coding style.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/spi/amlogic,meson-gx-spicc.yaml  |  26 +--
>  .../bindings/spi/amlogic,meson6-spifc.yaml    |  22 +--
>  .../bindings/spi/aspeed,ast2600-fmc.yaml      |  24 +--

For the Aspeed change:

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Neil Armstrong Jan. 19, 2023, 7:21 a.m. UTC | #3
On 18/01/2023 18:39, Krzysztof Kozlowski wrote:
> Cleanup examples:
>   - use 4-space indentation (for cases when it is neither 4 not 2 space),
>   - drop redundant blank lines,
>   - use lowercase hex.
> 
> No functional impact except adjusting to preferred coding style.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../bindings/spi/amlogic,meson-gx-spicc.yaml  |  26 +--
>   .../bindings/spi/amlogic,meson6-spifc.yaml    |  22 +--

For meson changes:

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

>   .../bindings/spi/aspeed,ast2600-fmc.yaml      |  24 +--
>   .../bindings/spi/brcm,spi-bcm-qspi.yaml       | 156 +++++++++---------
>   .../bindings/spi/cdns,qspi-nor.yaml           |   4 +-
>   .../bindings/spi/nvidia,tegra210-quad.yaml    |  42 ++---
>   .../bindings/spi/qcom,spi-qcom-qspi.yaml      |   1 -
>   .../devicetree/bindings/spi/renesas,rspi.yaml |  22 +--
>   .../bindings/spi/spi-sunplus-sp7021.yaml      |   4 +-
>   .../devicetree/bindings/spi/st,stm32-spi.yaml |   1 -
>   10 files changed, 150 insertions(+), 152 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> index e5eca3a6f132..4e28e6e9d8e0 100644
> --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> @@ -100,17 +100,17 @@ unevaluatedProperties: false
>   examples:
>     - |
>       spi@c1108d80 {
> -          compatible = "amlogic,meson-gx-spicc";
> -          reg = <0xc1108d80 0x80>;
> -          interrupts = <112>;
> -          clocks = <&clk81>;
> -          clock-names = "core";
> -          #address-cells = <1>;
> -          #size-cells = <0>;
> -
> -          display@0 {
> -              compatible = "lg,lg4573";
> -              spi-max-frequency = <1000000>;
> -              reg = <0>;
> -          };
> +        compatible = "amlogic,meson-gx-spicc";
> +        reg = <0xc1108d80 0x80>;
> +        interrupts = <112>;
> +        clocks = <&clk81>;
> +        clock-names = "core";
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        display@0 {
> +            compatible = "lg,lg4573";
> +            spi-max-frequency = <1000000>;
> +            reg = <0>;
> +        };
>       };
> diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
> index 806043fed4d1..8e769ccda97f 100644
> --- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
> +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
> @@ -40,15 +40,15 @@ unevaluatedProperties: false
>   examples:
>     - |
>       spi@c1108c80 {
> -          compatible = "amlogic,meson6-spifc";
> -          reg = <0xc1108c80 0x80>;
> -          clocks = <&clk81>;
> -          #address-cells = <1>;
> -          #size-cells = <0>;
> -
> -          flash: flash@0 {
> -              compatible = "spansion,m25p80", "jedec,spi-nor";
> -              reg = <0>;
> -              spi-max-frequency = <40000000>;
> -          };
> +        compatible = "amlogic,meson6-spifc";
> +        reg = <0xc1108c80 0x80>;
> +        clocks = <&clk81>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        flash: flash@0 {
> +            compatible = "spansion,m25p80", "jedec,spi-nor";
> +            reg = <0>;
> +            spi-max-frequency = <40000000>;
> +        };
>       };

<snip>
Rob Herring (Arm) Jan. 23, 2023, 8:17 p.m. UTC | #4
On Wed, Jan 18, 2023 at 06:39:32PM +0100, Krzysztof Kozlowski wrote:
> Cleanup examples:
>  - use 4-space indentation (for cases when it is neither 4 not 2 space),
>  - drop redundant blank lines,
>  - use lowercase hex.
> 
> No functional impact except adjusting to preferred coding style.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/spi/amlogic,meson-gx-spicc.yaml  |  26 +--
>  .../bindings/spi/amlogic,meson6-spifc.yaml    |  22 +--
>  .../bindings/spi/aspeed,ast2600-fmc.yaml      |  24 +--
>  .../bindings/spi/brcm,spi-bcm-qspi.yaml       | 156 +++++++++---------
>  .../bindings/spi/cdns,qspi-nor.yaml           |   4 +-
>  .../bindings/spi/nvidia,tegra210-quad.yaml    |  42 ++---
>  .../bindings/spi/qcom,spi-qcom-qspi.yaml      |   1 -
>  .../devicetree/bindings/spi/renesas,rspi.yaml |  22 +--
>  .../bindings/spi/spi-sunplus-sp7021.yaml      |   4 +-
>  .../devicetree/bindings/spi/st,stm32-spi.yaml |   1 -
>  10 files changed, 150 insertions(+), 152 deletions(-)

[...]

> diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
> index d35c6f7e2dd5..18afdaab946d 100644
> --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
> +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
> @@ -95,7 +95,6 @@ examples:
>               <&dmamux1 1 40 0x400 0x05>;
>        dma-names = "rx", "tx";
>        cs-gpios = <&gpioa 11 0>;

Looks like the indentation needs adjusting here.

> -
>      };
>  
>  ...
> -- 
> 2.34.1
>
Krzysztof Kozlowski Jan. 24, 2023, 8:17 a.m. UTC | #5
On 23/01/2023 21:17, Rob Herring wrote:
> On Wed, Jan 18, 2023 at 06:39:32PM +0100, Krzysztof Kozlowski wrote:
>> Cleanup examples:
>>  - use 4-space indentation (for cases when it is neither 4 not 2 space),
>>  - drop redundant blank lines,
>>  - use lowercase hex.
>>
>> No functional impact except adjusting to preferred coding style.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  .../bindings/spi/amlogic,meson-gx-spicc.yaml  |  26 +--
>>  .../bindings/spi/amlogic,meson6-spifc.yaml    |  22 +--
>>  .../bindings/spi/aspeed,ast2600-fmc.yaml      |  24 +--
>>  .../bindings/spi/brcm,spi-bcm-qspi.yaml       | 156 +++++++++---------
>>  .../bindings/spi/cdns,qspi-nor.yaml           |   4 +-
>>  .../bindings/spi/nvidia,tegra210-quad.yaml    |  42 ++---
>>  .../bindings/spi/qcom,spi-qcom-qspi.yaml      |   1 -
>>  .../devicetree/bindings/spi/renesas,rspi.yaml |  22 +--
>>  .../bindings/spi/spi-sunplus-sp7021.yaml      |   4 +-
>>  .../devicetree/bindings/spi/st,stm32-spi.yaml |   1 -
>>  10 files changed, 150 insertions(+), 152 deletions(-)
> 
> [...]
> 
>> diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
>> index d35c6f7e2dd5..18afdaab946d 100644
>> --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
>> +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
>> @@ -95,7 +95,6 @@ examples:
>>               <&dmamux1 1 40 0x400 0x05>;
>>        dma-names = "rx", "tx";
>>        cs-gpios = <&gpioa 11 0>;
> 
> Looks like the indentation needs adjusting here.
> 

Ack

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index e5eca3a6f132..4e28e6e9d8e0 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -100,17 +100,17 @@  unevaluatedProperties: false
 examples:
   - |
     spi@c1108d80 {
-          compatible = "amlogic,meson-gx-spicc";
-          reg = <0xc1108d80 0x80>;
-          interrupts = <112>;
-          clocks = <&clk81>;
-          clock-names = "core";
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          display@0 {
-              compatible = "lg,lg4573";
-              spi-max-frequency = <1000000>;
-              reg = <0>;
-          };
+        compatible = "amlogic,meson-gx-spicc";
+        reg = <0xc1108d80 0x80>;
+        interrupts = <112>;
+        clocks = <&clk81>;
+        clock-names = "core";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "lg,lg4573";
+            spi-max-frequency = <1000000>;
+            reg = <0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
index 806043fed4d1..8e769ccda97f 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
@@ -40,15 +40,15 @@  unevaluatedProperties: false
 examples:
   - |
     spi@c1108c80 {
-          compatible = "amlogic,meson6-spifc";
-          reg = <0xc1108c80 0x80>;
-          clocks = <&clk81>;
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          flash: flash@0 {
-              compatible = "spansion,m25p80", "jedec,spi-nor";
-              reg = <0>;
-              spi-max-frequency = <40000000>;
-          };
+        compatible = "amlogic,meson6-spifc";
+        reg = <0xc1108c80 0x80>;
+        clocks = <&clk81>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash: flash@0 {
+            compatible = "spansion,m25p80", "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
index aae6fb139b5b..57d932af4506 100644
--- a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
+++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
@@ -60,23 +60,23 @@  examples:
         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 
         flash@0 {
-                reg = < 0 >;
-                compatible = "jedec,spi-nor";
-                spi-max-frequency = <50000000>;
-                spi-rx-bus-width = <2>;
+            reg = < 0 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
         };
 
         flash@1 {
-                reg = < 1 >;
-                compatible = "jedec,spi-nor";
-                spi-max-frequency = <50000000>;
-                spi-rx-bus-width = <2>;
+            reg = < 1 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
         };
 
         flash@2 {
-                reg = < 2 >;
-                compatible = "jedec,spi-nor";
-                spi-max-frequency = <50000000>;
-                spi-rx-bus-width = <2>;
+            reg = < 2 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
         };
     };
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
index ec5873919170..28222aae3077 100644
--- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
@@ -99,98 +99,98 @@  required:
 examples:
   - | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access
     spi@f03e3400 {
-            compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
-            reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
-            reg-names = "mspi", "bspi", "cs_reg";
-            interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
-            interrupt-parent = <&gic>;
-            interrupt-names = "mspi_done",
-                              "mspi_halted",
-                              "spi_lr_fullness_reached",
-                              "spi_lr_session_aborted",
-                              "spi_lr_impatient",
-                              "spi_lr_session_done",
-                              "spi_lr_overread";
-            clocks = <&hif_spi>;
-            #address-cells = <0x1>;
-            #size-cells = <0x0>;
-
-            flash@0 {
-                    #size-cells = <0x2>;
-                    #address-cells = <0x2>;
-                    compatible = "m25p80";
-                    reg = <0x0>;
-                    spi-max-frequency = <0x2625a00>;
-                    spi-cpol;
-                    spi-cpha;
-            };
+        compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
+        reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
+        reg-names = "mspi", "bspi", "cs_reg";
+        interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
+        interrupt-parent = <&gic>;
+        interrupt-names = "mspi_done",
+                          "mspi_halted",
+                          "spi_lr_fullness_reached",
+                          "spi_lr_session_aborted",
+                          "spi_lr_impatient",
+                          "spi_lr_session_done",
+                          "spi_lr_overread";
+        clocks = <&hif_spi>;
+        #address-cells = <0x1>;
+        #size-cells = <0x0>;
+
+        flash@0 {
+            #size-cells = <0x2>;
+            #address-cells = <0x2>;
+            compatible = "m25p80";
+            reg = <0x0>;
+            spi-max-frequency = <0x2625a00>;
+            spi-cpol;
+            spi-cpha;
+        };
     };
   - | # BRCMSTB SoC: MSPI master for any SPI device
     spi@f0416000 {
-            clocks = <&upg_fixed>;
-            compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
-            reg = <0xf0416000 0x180>;
-            reg-names = "mspi";
-            interrupts = <0x14>;
-            interrupt-parent = <&irq0_aon_intc>;
-            interrupt-names = "mspi_done";
-            #address-cells = <1>;
-            #size-cells = <0>;
+        clocks = <&upg_fixed>;
+        compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
+        reg = <0xf0416000 0x180>;
+        reg-names = "mspi";
+        interrupts = <0x14>;
+        interrupt-parent = <&irq0_aon_intc>;
+        interrupt-names = "mspi_done";
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
   - | # iProc SoC
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     spi@18027200 {
-            compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
-            reg = <0x18027200 0x184>,
-                  <0x18027000 0x124>,
-                  <0x1811c408 0x004>,
-                  <0x180273a0 0x01c>;
-            reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-            interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "mspi_done",
-                              "mspi_halted",
-                              "spi_lr_fullness_reached",
-                              "spi_lr_session_aborted",
-                              "spi_lr_impatient",
-                              "spi_lr_session_done";
-            clocks = <&iprocmed>;
-            num-cs = <2>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+        reg = <0x18027200 0x184>,
+              <0x18027000 0x124>,
+              <0x1811c408 0x004>,
+              <0x180273a0 0x01c>;
+        reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "mspi_done",
+                          "mspi_halted",
+                          "spi_lr_fullness_reached",
+                          "spi_lr_session_aborted",
+                          "spi_lr_impatient",
+                          "spi_lr_session_done";
+        clocks = <&iprocmed>;
+        num-cs = <2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
   - | # NS2 SoC
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     spi@66470200 {
-            compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
-            reg = <0x66470200 0x184>,
-                  <0x66470000 0x124>,
-                  <0x67017408 0x004>,
-                  <0x664703a0 0x01c>;
-            reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-            interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "spi_l1_intr";
-            clocks = <&iprocmed>;
-            num-cs = <2>;
+        compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
+        reg = <0x66470200 0x184>,
+              <0x66470000 0x124>,
+              <0x67017408 0x004>,
+              <0x664703a0 0x01c>;
+        reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+        interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "spi_l1_intr";
+        clocks = <&iprocmed>;
+        num-cs = <2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
             #address-cells = <1>;
-            #size-cells = <0>;
-
-            flash@0 {
-                    #address-cells = <1>;
-                    #size-cells = <1>;
-                    compatible = "m25p80";
-                    reg = <0x0>;
-                    spi-max-frequency = <12500000>;
-                    spi-cpol;
-                    spi-cpha;
-            };
+            #size-cells = <1>;
+            compatible = "m25p80";
+            reg = <0x0>;
+            spi-max-frequency = <12500000>;
+            spi-cpol;
+            spi-cpha;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
index 9be4e2c5d1ee..7606b5a252b6 100644
--- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -117,7 +117,7 @@  examples:
       reset-names = "qspi", "qspi-ocp";
 
       flash@0 {
-              compatible = "jedec,spi-nor";
-              reg = <0x0>;
+        compatible = "jedec,spi-nor";
+        reg = <0x0>;
       };
     };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
index 9f78b2c06494..9ae1611175f2 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -74,25 +74,25 @@  examples:
     #include <dt-bindings/reset/tegra210-car.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     spi@70410000 {
-            compatible = "nvidia,tegra210-qspi";
-            reg = <0x70410000 0x1000>;
-            interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-            #address-cells = <1>;
-            #size-cells = <0>;
-            clocks = <&tegra_car TEGRA210_CLK_QSPI>,
-                     <&tegra_car TEGRA210_CLK_QSPI_PM>;
-            clock-names = "qspi", "qspi_out";
-            resets = <&tegra_car 211>;
-            dmas = <&apbdma 5>, <&apbdma 5>;
-            dma-names = "rx", "tx";
-
-            flash@0 {
-                    compatible = "jedec,spi-nor";
-                    reg = <0>;
-                    spi-max-frequency = <104000000>;
-                    spi-tx-bus-width = <2>;
-                    spi-rx-bus-width = <2>;
-                    nvidia,tx-clk-tap-delay = <0>;
-                    nvidia,rx-clk-tap-delay = <0>;
-            };
+        compatible = "nvidia,tegra210-qspi";
+        reg = <0x70410000 0x1000>;
+        interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&tegra_car TEGRA210_CLK_QSPI>,
+                 <&tegra_car TEGRA210_CLK_QSPI_PM>;
+        clock-names = "qspi", "qspi_out";
+        resets = <&tegra_car 211>;
+        dmas = <&apbdma 5>, <&apbdma 5>;
+        dma-names = "rx", "tx";
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <104000000>;
+            spi-tx-bus-width = <2>;
+            spi-rx-bus-width = <2>;
+            nvidia,tx-clk-tap-delay = <0>;
+            nvidia,rx-clk-tap-delay = <0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index 85e7770703bd..e94d915e28c8 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -87,7 +87,6 @@  examples:
                 spi-tx-bus-width = <2>;
                 spi-rx-bus-width = <2>;
             };
-
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
index f45d3b75d6de..4d8ec69214c9 100644
--- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
@@ -141,15 +141,15 @@  examples:
     #include <dt-bindings/power/r8a7791-sysc.h>
 
     qspi: spi@e6b10000 {
-            compatible = "renesas,qspi-r8a7791", "renesas,qspi";
-            reg = <0xe6b10000 0x2c>;
-            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 917>;
-            dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-            resets = <&cpg 917>;
-            num-cs = <1>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+        reg = <0xe6b10000 0x2c>;
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 917>;
+        dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 917>;
+        num-cs = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
index 69a463305274..edb5ba71af3a 100644
--- a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
@@ -59,9 +59,9 @@  unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi@9C002D80 {
+    spi@9c002d80 {
         compatible = "sunplus,sp7021-spi";
-        reg = <0x9C002D80 0x80>, <0x9C002E00 0x80>;
+        reg = <0x9c002d80 0x80>, <0x9c002e00 0x80>;
         reg-names = "master", "slave";
         interrupt-parent = <&intc>;
         interrupt-names = "dma_w",
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index d35c6f7e2dd5..18afdaab946d 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -95,7 +95,6 @@  examples:
              <&dmamux1 1 40 0x400 0x05>;
       dma-names = "rx", "tx";
       cs-gpios = <&gpioa 11 0>;
-
     };
 
 ...