diff mbox series

dt-bindings: watchdog: qcom-wdt: add the interrupts property

Message ID 20230130134328.178591-1-brgl@bgdev.pl (mailing list archive)
State Not Applicable
Headers show
Series dt-bindings: watchdog: qcom-wdt: add the interrupts property | expand

Commit Message

Bartosz Golaszewski Jan. 30, 2023, 1:43 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The interrupts property is used in all nodes using this binding but not
defined in the document itself - hence dtbs_check fails for them. Add
the property and update the example.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../devicetree/bindings/watchdog/qcom-wdt.yaml        | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Rob Herring (Arm) Jan. 30, 2023, 10:59 p.m. UTC | #1
On Mon, Jan 30, 2023 at 02:43:28PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> The interrupts property is used in all nodes using this binding but not
> defined in the document itself - hence dtbs_check fails for them. Add
> the property and update the example.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>  .../devicetree/bindings/watchdog/qcom-wdt.yaml        | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> index 27fb484d5f8d..45940d643b92 100644
> --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> @@ -46,6 +46,10 @@ properties:
>    clocks:
>      maxItems: 1
>  
> +  interrupts:
> +    minItems: 1
> +    maxItems: 5

What is each interrupt?

> +
>  required:
>    - compatible
>    - reg
> @@ -55,9 +59,16 @@ unevaluatedProperties: false
>  
>  examples:
>    - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
>      watchdog@208a038 {
>        compatible = "qcom,kpss-wdt-ipq8064";
>        reg = <0x0208a038 0x40>;
>        clocks = <&sleep_clk>;
>        timeout-sec = <10>;
> +      interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
>      };
> -- 
> 2.37.2
>
Krzysztof Kozlowski Feb. 2, 2023, 1:48 p.m. UTC | #2
On 30/01/2023 14:43, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> The interrupts property is used in all nodes using this binding but not
> defined in the document itself - hence dtbs_check fails for them. Add
> the property and update the example.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>  .../devicetree/bindings/watchdog/qcom-wdt.yaml        | 11 +++++++++++
>  1 file changed, 11 insertions(+)

dfn in lore would save you some effort (or my pending branch which I
shared on IRC):

https://lore.kernel.org/all/20230113103346.29381-6-krzysztof.kozlowski@linaro.org/

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
index 27fb484d5f8d..45940d643b92 100644
--- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -46,6 +46,10 @@  properties:
   clocks:
     maxItems: 1
 
+  interrupts:
+    minItems: 1
+    maxItems: 5
+
 required:
   - compatible
   - reg
@@ -55,9 +59,16 @@  unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     watchdog@208a038 {
       compatible = "qcom,kpss-wdt-ipq8064";
       reg = <0x0208a038 0x40>;
       clocks = <&sleep_clk>;
       timeout-sec = <10>;
+      interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
     };