diff mbox series

[v3,2/2] arm64: dts: qcom: sm8550: Add bias pull up value to tlmm i2c data clk states

Message ID 20230208081836.984673-2-abel.vesa@linaro.org (mailing list archive)
State Superseded
Headers show
Series [v3,1/2] pinctrl: qcom: Add support for i2c specific pull feature | expand

Commit Message

Abel Vesa Feb. 8, 2023, 8:18 a.m. UTC 
The default bias pull up value for the tlmm i2c data clk states is
2.2kOhms. Add this value to make sure the driver factors in the i2c pull
up bit when writing the config register.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---

This patch does not have a v2 (or a v1). This is an entirely new patch and it is
part of this patchset to provide full context.

 arch/arm64/boot/dts/qcom/sm8550.dtsi | 30 ++++++++++++++--------------
 1 file changed, 15 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 1dea055a6815..6e60afc748cf 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2695,7 +2695,7 @@  qup_i2c0_data_clk: qup-i2c0-data-clk-state {
 				pins = "gpio28", "gpio29";
 				function = "qup1_se0";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
@@ -2703,7 +2703,7 @@  qup_i2c1_data_clk: qup-i2c1-data-clk-state {
 				pins = "gpio32", "gpio33";
 				function = "qup1_se1";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
@@ -2711,7 +2711,7 @@  qup_i2c2_data_clk: qup-i2c2-data-clk-state {
 				pins = "gpio36", "gpio37";
 				function = "qup1_se2";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
@@ -2719,7 +2719,7 @@  qup_i2c3_data_clk: qup-i2c3-data-clk-state {
 				pins = "gpio40", "gpio41";
 				function = "qup1_se3";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
@@ -2727,7 +2727,7 @@  qup_i2c4_data_clk: qup-i2c4-data-clk-state {
 				pins = "gpio44", "gpio45";
 				function = "qup1_se4";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
@@ -2735,7 +2735,7 @@  qup_i2c5_data_clk: qup-i2c5-data-clk-state {
 				pins = "gpio52", "gpio53";
 				function = "qup1_se5";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
@@ -2743,7 +2743,7 @@  qup_i2c6_data_clk: qup-i2c6-data-clk-state {
 				pins = "gpio48", "gpio49";
 				function = "qup1_se6";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
@@ -2751,14 +2751,14 @@  scl-pins {
 					pins = "gpio57";
 					function = "qup2_se0_l1_mira";
 					drive-strength = <2>;
-					bias-pull-up;
+					bias-pull-up = <2200>;
 				};
 
 				sda-pins {
 					pins = "gpio56";
 					function = "qup2_se0_l0_mira";
 					drive-strength = <2>;
-					bias-pull-up;
+					bias-pull-up = <2200>;
 				};
 			};
 
@@ -2767,7 +2767,7 @@  qup_i2c9_data_clk: qup-i2c9-data-clk-state {
 				pins = "gpio60", "gpio61";
 				function = "qup2_se1";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
@@ -2775,7 +2775,7 @@  qup_i2c10_data_clk: qup-i2c10-data-clk-state {
 				pins = "gpio64", "gpio65";
 				function = "qup2_se2";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
@@ -2783,7 +2783,7 @@  qup_i2c11_data_clk: qup-i2c11-data-clk-state {
 				pins = "gpio68", "gpio69";
 				function = "qup2_se3";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
@@ -2791,7 +2791,7 @@  qup_i2c12_data_clk: qup-i2c12-data-clk-state {
 				pins = "gpio2", "gpio3";
 				function = "qup2_se4";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
@@ -2799,7 +2799,7 @@  qup_i2c13_data_clk: qup-i2c13-data-clk-state {
 				pins = "gpio80", "gpio81";
 				function = "qup2_se5";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
@@ -2807,7 +2807,7 @@  qup_i2c15_data_clk: qup-i2c15-data-clk-state {
 				pins = "gpio72", "gpio106";
 				function = "qup2_se7";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_spi0_cs: qup-spi0-cs-state {