diff mbox series

[v2,1/2] arm64: dts: qcom: sm7225-fairphone-fp4: move status property down

Message ID 20230213-fp4-more-i2c-v2-1-1c459c572f80@fairphone.com (mailing list archive)
State Accepted
Headers show
Series Enable remaining I2C busses on sm7225-fairphone-fp4 | expand

Commit Message

Luca Weiss Feb. 13, 2023, 2:46 p.m. UTC 
Currently the dts contains a mix of status-as-first-property (old qcom
style) and status-as-last-property (new style).

Move all status properties down to the bottom once and for all so that
the style is consistent between different nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 34 +++++++++++------------
 1 file changed, 17 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index f7602e93121a..86114dd2c0c4 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -110,8 +110,8 @@  active-config0 {
 };
 
 &adsp {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
+	status = "okay";
 };
 
 &apps_rsc {
@@ -355,13 +355,13 @@  &cci1_i2c0 {
 };
 
 &cdsp {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+	status = "okay";
 };
 
 &i2c10 {
-	status = "okay";
 	clock-frequency = <400000>;
+	status = "okay";
 
 	haptics@5a {
 		compatible = "awinic,aw8695";
@@ -396,8 +396,8 @@  &ipa {
 };
 
 &mpss {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+	status = "okay";
 };
 
 &pm6150l_flash {
@@ -423,11 +423,11 @@  led-1 {
 };
 
 &pm6150l_wled {
-	status = "okay";
-
 	qcom,switching-freq = <800>;
 	qcom,current-limit-microamp = <20000>;
 	qcom,num-strings = <2>;
+
+	status = "okay";
 };
 
 &pm6350_gpios {
@@ -441,8 +441,8 @@  gpio_keys_pin: gpio-keys-state {
 };
 
 &pm6350_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pm7250b_adc {
@@ -535,21 +535,21 @@  &uart9 {
 };
 
 &ufs_mem_hc {
-	status = "okay";
-
 	reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
 
 	vcc-supply = <&vreg_l7e>;
 	vcc-max-microamp = <800000>;
 	vccq2-supply = <&vreg_l12a>;
 	vccq2-max-microamp = <800000>;
+
+	status = "okay";
 };
 
 &ufs_mem_phy {
-	status = "okay";
-
 	vdda-phy-supply = <&vreg_l18a>;
 	vdda-pll-supply = <&vreg_l22a>;
+
+	status = "okay";
 };
 
 &usb_1 {
@@ -562,26 +562,26 @@  &usb_1_dwc3 {
 };
 
 &usb_1_hsphy {
-	status = "okay";
-
 	vdd-supply = <&vreg_l18a>;
 	vdda-pll-supply = <&vreg_l2a>;
 	vdda-phy-dpdm-supply = <&vreg_l3a>;
+
+	status = "okay";
 };
 
 &usb_1_qmpphy {
-	status = "okay";
-
 	vdda-phy-supply = <&vreg_l22a>;
 	vdda-pll-supply = <&vreg_l16a>;
+
+	status = "okay";
 };
 
 &wifi {
-	status = "okay";
-
 	vdd-0.8-cx-mx-supply = <&vreg_l4a>;
 	vdd-1.8-xo-supply = <&vreg_l7a>;
 	vdd-1.3-rfa-supply = <&vreg_l2e>;
 	vdd-3.3-ch0-supply = <&vreg_l10e>;
 	vdd-3.3-ch1-supply = <&vreg_l11e>;
+
+	status = "okay";
 };