Message ID | 20230310132201.322148-4-krzysztof.kozlowski@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | ASoC: add audio digital codecs for Qualcomm SM8550 | expand |
Thanks Krzysztof for adding this support. Few minor nits, On 10/03/2023 13:21, Krzysztof Kozlowski wrote: > Add support for the RX macro codec on Qualcomm SM8550. SM8550 does not > use NPL clock, thus add flags allowing to skip it. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > sound/soc/codecs/lpass-rx-macro.c | 39 ++++++++++++++++++++++++------- > 1 file changed, 31 insertions(+), 8 deletions(-) > > diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c > index a73a7d7a1c0a..e322d918db36 100644 > --- a/sound/soc/codecs/lpass-rx-macro.c > +++ b/sound/soc/codecs/lpass-rx-macro.c > @@ -395,6 +395,9 @@ > #define COMP_MAX_COEFF 25 > #define RX_NUM_CLKS_MAX 5 > > +/* NPL clock is expected */ > +#define RX_MACRO_FLAG_HAS_NPL_CLOCK BIT(0) We could probably rename it and move it to sound/soc/codecs/lpass-macro-common.h as this equally applies to all the codec macros. Once done, Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > + > struct comp_coeff_val { > u8 lsb; > u8 msb; > @@ -3491,7 +3494,10 @@ static int rx_macro_register_mclk_output(struct rx_macro *rx) > struct clk_init_data init; > int ret; > > - parent_clk_name = __clk_get_name(rx->npl); > + if (rx->npl) > + parent_clk_name = __clk_get_name(rx->npl); > + else > + parent_clk_name = __clk_get_name(rx->mclk); > > init.name = clk_name; > init.ops = &swclk_gate_ops; > @@ -3521,10 +3527,13 @@ static const struct snd_soc_component_driver rx_macro_component_drv = { > static int rx_macro_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > + kernel_ulong_t flags; > struct rx_macro *rx; > void __iomem *base; > int ret; > > + flags = (kernel_ulong_t)device_get_match_data(dev); > + > rx = devm_kzalloc(dev, sizeof(*rx), GFP_KERNEL); > if (!rx) > return -ENOMEM; > @@ -3541,9 +3550,11 @@ static int rx_macro_probe(struct platform_device *pdev) > if (IS_ERR(rx->mclk)) > return PTR_ERR(rx->mclk); > > - rx->npl = devm_clk_get(dev, "npl"); > - if (IS_ERR(rx->npl)) > - return PTR_ERR(rx->npl); > + if (flags & RX_MACRO_FLAG_HAS_NPL_CLOCK) { > + rx->npl = devm_clk_get(dev, "npl"); > + if (IS_ERR(rx->npl)) > + return PTR_ERR(rx->npl); > + } > > rx->fsgen = devm_clk_get(dev, "fsgen"); > if (IS_ERR(rx->fsgen)) > @@ -3655,10 +3666,22 @@ static int rx_macro_remove(struct platform_device *pdev) > } > > static const struct of_device_id rx_macro_dt_match[] = { > - { .compatible = "qcom,sc7280-lpass-rx-macro" }, > - { .compatible = "qcom,sm8250-lpass-rx-macro" }, > - { .compatible = "qcom,sm8450-lpass-rx-macro" }, > - { .compatible = "qcom,sc8280xp-lpass-rx-macro" }, > + { > + .compatible = "qcom,sc7280-lpass-rx-macro", > + .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK, > + > + }, { > + .compatible = "qcom,sm8250-lpass-rx-macro", > + .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK, > + }, { > + .compatible = "qcom,sm8450-lpass-rx-macro", > + .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK, > + }, { > + .compatible = "qcom,sm8550-lpass-rx-macro", > + }, { > + .compatible = "qcom,sc8280xp-lpass-rx-macro", > + .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK, > + }, > { } > }; > MODULE_DEVICE_TABLE(of, rx_macro_dt_match);
On 11/03/2023 12:23, Srinivas Kandagatla wrote: > Thanks Krzysztof for adding this support. > Few minor nits, > > On 10/03/2023 13:21, Krzysztof Kozlowski wrote: >> Add support for the RX macro codec on Qualcomm SM8550. SM8550 does not >> use NPL clock, thus add flags allowing to skip it. >> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> --- >> sound/soc/codecs/lpass-rx-macro.c | 39 ++++++++++++++++++++++++------- >> 1 file changed, 31 insertions(+), 8 deletions(-) >> >> diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c >> index a73a7d7a1c0a..e322d918db36 100644 >> --- a/sound/soc/codecs/lpass-rx-macro.c >> +++ b/sound/soc/codecs/lpass-rx-macro.c >> @@ -395,6 +395,9 @@ >> #define COMP_MAX_COEFF 25 >> #define RX_NUM_CLKS_MAX 5 >> >> +/* NPL clock is expected */ >> +#define RX_MACRO_FLAG_HAS_NPL_CLOCK BIT(0) > > We could probably rename it and move it to > sound/soc/codecs/lpass-macro-common.h as this equally applies to all the > codec macros. > > > Once done, > > Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Sure, I'll move it there. Best regards, Krzysztof
diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c index a73a7d7a1c0a..e322d918db36 100644 --- a/sound/soc/codecs/lpass-rx-macro.c +++ b/sound/soc/codecs/lpass-rx-macro.c @@ -395,6 +395,9 @@ #define COMP_MAX_COEFF 25 #define RX_NUM_CLKS_MAX 5 +/* NPL clock is expected */ +#define RX_MACRO_FLAG_HAS_NPL_CLOCK BIT(0) + struct comp_coeff_val { u8 lsb; u8 msb; @@ -3491,7 +3494,10 @@ static int rx_macro_register_mclk_output(struct rx_macro *rx) struct clk_init_data init; int ret; - parent_clk_name = __clk_get_name(rx->npl); + if (rx->npl) + parent_clk_name = __clk_get_name(rx->npl); + else + parent_clk_name = __clk_get_name(rx->mclk); init.name = clk_name; init.ops = &swclk_gate_ops; @@ -3521,10 +3527,13 @@ static const struct snd_soc_component_driver rx_macro_component_drv = { static int rx_macro_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + kernel_ulong_t flags; struct rx_macro *rx; void __iomem *base; int ret; + flags = (kernel_ulong_t)device_get_match_data(dev); + rx = devm_kzalloc(dev, sizeof(*rx), GFP_KERNEL); if (!rx) return -ENOMEM; @@ -3541,9 +3550,11 @@ static int rx_macro_probe(struct platform_device *pdev) if (IS_ERR(rx->mclk)) return PTR_ERR(rx->mclk); - rx->npl = devm_clk_get(dev, "npl"); - if (IS_ERR(rx->npl)) - return PTR_ERR(rx->npl); + if (flags & RX_MACRO_FLAG_HAS_NPL_CLOCK) { + rx->npl = devm_clk_get(dev, "npl"); + if (IS_ERR(rx->npl)) + return PTR_ERR(rx->npl); + } rx->fsgen = devm_clk_get(dev, "fsgen"); if (IS_ERR(rx->fsgen)) @@ -3655,10 +3666,22 @@ static int rx_macro_remove(struct platform_device *pdev) } static const struct of_device_id rx_macro_dt_match[] = { - { .compatible = "qcom,sc7280-lpass-rx-macro" }, - { .compatible = "qcom,sm8250-lpass-rx-macro" }, - { .compatible = "qcom,sm8450-lpass-rx-macro" }, - { .compatible = "qcom,sc8280xp-lpass-rx-macro" }, + { + .compatible = "qcom,sc7280-lpass-rx-macro", + .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK, + + }, { + .compatible = "qcom,sm8250-lpass-rx-macro", + .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK, + }, { + .compatible = "qcom,sm8450-lpass-rx-macro", + .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK, + }, { + .compatible = "qcom,sm8550-lpass-rx-macro", + }, { + .compatible = "qcom,sc8280xp-lpass-rx-macro", + .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK, + }, { } }; MODULE_DEVICE_TABLE(of, rx_macro_dt_match);
Add support for the RX macro codec on Qualcomm SM8550. SM8550 does not use NPL clock, thus add flags allowing to skip it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- sound/soc/codecs/lpass-rx-macro.c | 39 ++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 8 deletions(-)