diff mbox series

[1/5] arm64: dts: qcom: sdm845: Fix the BAM DMA engine compatible string

Message ID 20230321190118.3327360-2-bhupesh.sharma@linaro.org (mailing list archive)
State Accepted
Commit b767d1b40cbca49452d712ca0f4f053dacfc5c45
Headers show
Series arm64: dts: qcom: Enable Crypto Engine for a few Qualcomm SoCs | expand

Commit Message

Bhupesh Sharma March 21, 2023, 7:01 p.m. UTC
As per documentation, Qualcomm SDM845 SoC supports BAM DMA
engine v1.7.4, so use the correct compatible strings.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Konrad Dybcio March 21, 2023, 7:29 p.m. UTC | #1
On 21.03.2023 20:01, Bhupesh Sharma wrote:
> As per documentation, Qualcomm SDM845 SoC supports BAM DMA
> engine v1.7.4, so use the correct compatible strings.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 0fdd59a9feed..e8e9aa4da914 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2628,7 +2628,7 @@ ufs_mem_phy_lanes: phy@1d87400 {
>  		};
>  
>  		cryptobam: dma-controller@1dc4000 {
> -			compatible = "qcom,bam-v1.7.0";
> +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
>  			reg = <0 0x01dc4000 0 0x24000>;
>  			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&rpmhcc RPMH_CE_CLK>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0fdd59a9feed..e8e9aa4da914 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2628,7 +2628,7 @@  ufs_mem_phy_lanes: phy@1d87400 {
 		};
 
 		cryptobam: dma-controller@1dc4000 {
-			compatible = "qcom,bam-v1.7.0";
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0 0x01dc4000 0 0x24000>;
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rpmhcc RPMH_CE_CLK>;