diff mbox series

[net-next,v6,11/16] dt-bindings: net: ethernet-controller: Document support for LEDs node

Message ID 20230327141031.11904-12-ansuelsmth@gmail.com (mailing list archive)
State Superseded
Headers show
Series net: Add basic LED support for switch/phy | expand

Commit Message

Christian Marangi March 27, 2023, 2:10 p.m. UTC
Document support for LEDs node in ethernet-controller.
Ethernet Controller may support different LEDs that can be configured
for different operation like blinking on traffic event or port link.

Also add some Documentation to describe the difference of these nodes
compared to PHY LEDs, since ethernet-controller LEDs are controllable
by the ethernet controller regs and the possible intergated PHY doesn't
have control on them.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/net/ethernet-controller.yaml   | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 00be387984ac..e2558787531b 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -222,6 +222,16 @@  properties:
         required:
           - speed
 
+  leds:
+    description:
+      Describes the LEDs associated by Ethernet Controller.
+      These LEDs are not integrated in the PHY and PHY doesn't have any
+      control on them. Ethernet Controller regs are used to control
+      these defined LEDs.
+
+    allOf:
+      - $ref: /schemas/leds/leds-ethernet.yaml#
+
 dependencies:
   pcs-handle-names: [pcs-handle]