| Message ID | 20230327184811.499553-4-me@dylanvanassche.be (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dts: qcom: arm64: sdm845: SLPI DSP enablement | expand |
On 27/03/2023 20:48, Dylan Van Assche wrote: > Qualcomm SDM845 SoC features a SLPI DSP which uses FastRPC through > an allocated memory region to load files from the host filesystem > such as sensor configuration files. > > Add a FastRPC node at /dev/fastrpc-sdsp and a DMA region, similar to > downstream, to allow userspace to communicate with the SLPI via the > FastRPC interface for initializing the sensors on the SLPI. > > Signed-off-by: Dylan Van Assche <me@dylanvanassche.be> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 3b547cb7aeb8..7412ea938765 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -878,6 +878,14 @@ mdata_mem: mpss-metadata { > size = <0 0x4000>; > no-map; > }; > + > + fastrpc_mem: fastrpc { > + compatible = "shared-dma-pool"; > + reusable; > + alloc-ranges = <0 0x00000000 0 0xffffffff>; > + alignment = <0 0x400000>; > + size = <0 0x1000000>; > + }; > }; > > adsp_pas: remoteproc-adsp { > @@ -3344,6 +3352,21 @@ glink-edge { > label = "dsps"; > qcom,remote-pid = <3>; > mboxes = <&apss_shared 24>; > + > + fastrpc { > + compatible = "qcom,fastrpc"; > + qcom,glink-channels = "fastrpcglink-apps-dsp"; > + label = "sdsp"; > + qcom,non-secure-domain; > + qcom,vmids = <0x3 0xF 0x5 0x6>; > + memory-region = <&fastrpc_mem>; > + #address-cells = <1>; > + #size-cells = <0>; This does not make sense now with children nodes not having unit addresses... but anyway, I do not understand why this one compute node cannot have unit address. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 3b547cb7aeb8..7412ea938765 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -878,6 +878,14 @@ mdata_mem: mpss-metadata { size = <0 0x4000>; no-map; }; + + fastrpc_mem: fastrpc { + compatible = "shared-dma-pool"; + reusable; + alloc-ranges = <0 0x00000000 0 0xffffffff>; + alignment = <0 0x400000>; + size = <0 0x1000000>; + }; }; adsp_pas: remoteproc-adsp { @@ -3344,6 +3352,21 @@ glink-edge { label = "dsps"; qcom,remote-pid = <3>; mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + qcom,vmids = <0x3 0xF 0x5 0x6>; + memory-region = <&fastrpc_mem>; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb { + compatible = "qcom,fastrpc-compute-cb"; + }; + }; }; };
Qualcomm SDM845 SoC features a SLPI DSP which uses FastRPC through an allocated memory region to load files from the host filesystem such as sensor configuration files. Add a FastRPC node at /dev/fastrpc-sdsp and a DMA region, similar to downstream, to allow userspace to communicate with the SLPI via the FastRPC interface for initializing the sensors on the SLPI. Signed-off-by: Dylan Van Assche <me@dylanvanassche.be> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)