diff mbox series

[v2,11/17] drm/msm/dpu: Disable MDP vsync source selection on DPU 5.0.0 and above

Message ID 20230411-dpu-intf-te-v2-11-ef76c877eb97@somainline.org (mailing list archive)
State Superseded
Headers show
Series drm/msm/dpu: Implement tearcheck support on INTF block | expand

Commit Message

Marijn Suijten April 17, 2023, 8:21 p.m. UTC
Since hardware revision 5.0.0 the TE configuration moved out of the
PINGPONG block into the INTF block, including vsync source selection
that was previously part of MDP top.  Writing to the MDP_VSYNC_SEL
register has no effect anymore and is omitted downstream via the
DPU/SDE_MDP_VSYNC_SEL feature flag.  This flag is only added to INTF
blocks used by hardware prior to 5.0.0.

The code that writes to these registers in the INTF block will follow in
subsequent patches.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h    |  2 +-
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h |  2 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |  3 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c         | 52 +++++++++++++++-------
 4 files changed, 41 insertions(+), 18 deletions(-)

Comments

Dmitry Baryshkov April 20, 2023, 1 a.m. UTC | #1
On 17/04/2023 23:21, Marijn Suijten wrote:
> Since hardware revision 5.0.0 the TE configuration moved out of the
> PINGPONG block into the INTF block, including vsync source selection
> that was previously part of MDP top.  Writing to the MDP_VSYNC_SEL
> register has no effect anymore and is omitted downstream via the
> DPU/SDE_MDP_VSYNC_SEL feature flag.  This flag is only added to INTF
> blocks used by hardware prior to 5.0.0.
> 
> The code that writes to these registers in the INTF block will follow in
> subsequent patches.
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   .../drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h    |  2 +-
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h |  2 +-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |  3 ++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c         | 52 +++++++++++++++-------
>   4 files changed, 41 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
> index b7845591c384..6906f8046b9e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
> @@ -30,7 +30,7 @@ static const struct dpu_mdp_cfg msm8998_mdp[] = {
>   	{
>   	.name = "top_0", .id = MDP_TOP,
>   	.base = 0x0, .len = 0x458,
> -	.features = 0,
> +	.features = BIT(DPU_MDP_VSYNC_SEL),
>   	.clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
>   	.clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
>   	.clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
> index 5b9b3b99f1b5..14ce397800d5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
> @@ -30,7 +30,7 @@ static const struct dpu_mdp_cfg sdm845_mdp[] = {
>   	{
>   	.name = "top_0", .id = MDP_TOP,
>   	.base = 0x0, .len = 0x45c,
> -	.features = BIT(DPU_MDP_AUDIO_SELECT),
> +	.features = BIT(DPU_MDP_AUDIO_SELECT) | BIT(DPU_MDP_VSYNC_SEL),
>   	.clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
>   	.clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
>   	.clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 71584cd56fd7..599e177b89dd 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -48,6 +48,8 @@ enum {
>    * @DPU_MDP_UBWC_1_5,      Universal Bandwidth compression version 1.5
>    * @DPU_MDP_PERIPH_0_REMOVED Indicates that access to periph top0 block results
>    *			   in a failure
> + * @DPU_MDP_VSYNC_SEL      Enables vsync source selection via MDP_VSYNC_SEL register
> + *                         (moved into INTF block since DPU 5.0.0)
>    * @DPU_MDP_MAX            Maximum value
>   
>    */
> @@ -59,6 +61,7 @@ enum {
>   	DPU_MDP_UBWC_1_5,
>   	DPU_MDP_AUDIO_SELECT,
>   	DPU_MDP_PERIPH_0_REMOVED,
> +	DPU_MDP_VSYNC_SEL,
>   	DPU_MDP_MAX
>   };
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> index 2bb02e17ee52..9ea15a647a66 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> @@ -126,28 +126,16 @@ static void dpu_hw_get_danger_status(struct dpu_hw_mdp *mdp,
>   	status->sspp[SSPP_CURSOR1] = (value >> 26) & 0x3;
>   }
>   
> -static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
> +static void dpu_hw_setup_vsync_source_v1(struct dpu_hw_mdp *mdp,
>   		struct dpu_vsync_source_cfg *cfg)

In my opinion _v1 is not really descriptive here. Could you please 
rename it to dpu_hw_setup_vsync_source_no_vsync_sel() ?

Or maybe rename dpu_hw_setup_vsync_source() to 
dpu_hw_setup_vsync_source_vsync_sel() and drop _v1 from this function.

Up to you.


>   {
>   	struct dpu_hw_blk_reg_map *c;
> -	u32 reg, wd_load_value, wd_ctl, wd_ctl2, i;
> -	static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
> +	u32 reg, wd_load_value, wd_ctl, wd_ctl2;
>   
> -	if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
> +	if (!mdp || !cfg)
>   		return;
>   
>   	c = &mdp->hw;
> -	reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
> -	for (i = 0; i < cfg->pp_count; i++) {
> -		int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
> -
> -		if (pp_idx >= ARRAY_SIZE(pp_offset))
> -			continue;
> -
> -		reg &= ~(0xf << pp_offset[pp_idx]);
> -		reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
> -	}
> -	DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
>   
>   	if (cfg->vsync_source >= DPU_VSYNC_SOURCE_WD_TIMER_4 &&
>   			cfg->vsync_source <= DPU_VSYNC_SOURCE_WD_TIMER_0) {
> @@ -194,6 +182,33 @@ static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>   	}
>   }
>   
> +static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
> +		struct dpu_vsync_source_cfg *cfg)
> +{
> +	struct dpu_hw_blk_reg_map *c;
> +	u32 reg, i;
> +	static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
> +
> +	if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
> +		return;
> +
> +	c = &mdp->hw;
> +
> +	reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
> +	for (i = 0; i < cfg->pp_count; i++) {
> +		int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
> +
> +		if (pp_idx >= ARRAY_SIZE(pp_offset))
> +			continue;
> +
> +		reg &= ~(0xf << pp_offset[pp_idx]);
> +		reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
> +	}
> +	DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
> +
> +	dpu_hw_setup_vsync_source_v1(mdp, cfg);
> +}
> +
>   static void dpu_hw_get_safe_status(struct dpu_hw_mdp *mdp,
>   		struct dpu_danger_safe_status *status)
>   {
> @@ -241,7 +256,12 @@ static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
>   	ops->setup_split_pipe = dpu_hw_setup_split_pipe;
>   	ops->setup_clk_force_ctrl = dpu_hw_setup_clk_force_ctrl;
>   	ops->get_danger_status = dpu_hw_get_danger_status;
> -	ops->setup_vsync_source = dpu_hw_setup_vsync_source;
> +
> +	if (cap & BIT(DPU_MDP_VSYNC_SEL))
> +		ops->setup_vsync_source = dpu_hw_setup_vsync_source;
> +	else
> +		ops->setup_vsync_source = dpu_hw_setup_vsync_source_v1;
> +
>   	ops->get_safe_status = dpu_hw_get_safe_status;
>   
>   	if (cap & BIT(DPU_MDP_AUDIO_SELECT))
>
Konrad Dybcio April 20, 2023, 1:01 a.m. UTC | #2
On 20.04.2023 03:00, Dmitry Baryshkov wrote:
> On 17/04/2023 23:21, Marijn Suijten wrote:
>> Since hardware revision 5.0.0 the TE configuration moved out of the
>> PINGPONG block into the INTF block, including vsync source selection
>> that was previously part of MDP top.  Writing to the MDP_VSYNC_SEL
>> register has no effect anymore and is omitted downstream via the
>> DPU/SDE_MDP_VSYNC_SEL feature flag.  This flag is only added to INTF
>> blocks used by hardware prior to 5.0.0.
>>
>> The code that writes to these registers in the INTF block will follow in
>> subsequent patches.
>>
>> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> ---
>>   .../drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h    |  2 +-
>>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h |  2 +-
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |  3 ++
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c         | 52 +++++++++++++++-------
>>   4 files changed, 41 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
>> index b7845591c384..6906f8046b9e 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
>> @@ -30,7 +30,7 @@ static const struct dpu_mdp_cfg msm8998_mdp[] = {
>>       {
>>       .name = "top_0", .id = MDP_TOP,
>>       .base = 0x0, .len = 0x458,
>> -    .features = 0,
>> +    .features = BIT(DPU_MDP_VSYNC_SEL),
>>       .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
>>       .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
>>       .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
>> index 5b9b3b99f1b5..14ce397800d5 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
>> @@ -30,7 +30,7 @@ static const struct dpu_mdp_cfg sdm845_mdp[] = {
>>       {
>>       .name = "top_0", .id = MDP_TOP,
>>       .base = 0x0, .len = 0x45c,
>> -    .features = BIT(DPU_MDP_AUDIO_SELECT),
>> +    .features = BIT(DPU_MDP_AUDIO_SELECT) | BIT(DPU_MDP_VSYNC_SEL),
>>       .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
>>       .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
>>       .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index 71584cd56fd7..599e177b89dd 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -48,6 +48,8 @@ enum {
>>    * @DPU_MDP_UBWC_1_5,      Universal Bandwidth compression version 1.5
>>    * @DPU_MDP_PERIPH_0_REMOVED Indicates that access to periph top0 block results
>>    *               in a failure
>> + * @DPU_MDP_VSYNC_SEL      Enables vsync source selection via MDP_VSYNC_SEL register
>> + *                         (moved into INTF block since DPU 5.0.0)
>>    * @DPU_MDP_MAX            Maximum value
>>      */
>> @@ -59,6 +61,7 @@ enum {
>>       DPU_MDP_UBWC_1_5,
>>       DPU_MDP_AUDIO_SELECT,
>>       DPU_MDP_PERIPH_0_REMOVED,
>> +    DPU_MDP_VSYNC_SEL,
>>       DPU_MDP_MAX
>>   };
>>   diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> index 2bb02e17ee52..9ea15a647a66 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> @@ -126,28 +126,16 @@ static void dpu_hw_get_danger_status(struct dpu_hw_mdp *mdp,
>>       status->sspp[SSPP_CURSOR1] = (value >> 26) & 0x3;
>>   }
>>   -static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>> +static void dpu_hw_setup_vsync_source_v1(struct dpu_hw_mdp *mdp,
>>           struct dpu_vsync_source_cfg *cfg)
> 
> In my opinion _v1 is not really descriptive here. Could you please rename it to dpu_hw_setup_vsync_source_no_vsync_sel() ?
v1 refers to the CTL rev 100 a.k.a 1.0.0 a.k.a 1, but that's not
yet very well formulated upstream.. if we even need it..

Konrad
> 
> Or maybe rename dpu_hw_setup_vsync_source() to dpu_hw_setup_vsync_source_vsync_sel() and drop _v1 from this function.
> 
> Up to you.
> 
> 
>>   {
>>       struct dpu_hw_blk_reg_map *c;
>> -    u32 reg, wd_load_value, wd_ctl, wd_ctl2, i;
>> -    static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
>> +    u32 reg, wd_load_value, wd_ctl, wd_ctl2;
>>   -    if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
>> +    if (!mdp || !cfg)
>>           return;
>>         c = &mdp->hw;
>> -    reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
>> -    for (i = 0; i < cfg->pp_count; i++) {
>> -        int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
>> -
>> -        if (pp_idx >= ARRAY_SIZE(pp_offset))
>> -            continue;
>> -
>> -        reg &= ~(0xf << pp_offset[pp_idx]);
>> -        reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
>> -    }
>> -    DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
>>         if (cfg->vsync_source >= DPU_VSYNC_SOURCE_WD_TIMER_4 &&
>>               cfg->vsync_source <= DPU_VSYNC_SOURCE_WD_TIMER_0) {
>> @@ -194,6 +182,33 @@ static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>>       }
>>   }
>>   +static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>> +        struct dpu_vsync_source_cfg *cfg)
>> +{
>> +    struct dpu_hw_blk_reg_map *c;
>> +    u32 reg, i;
>> +    static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
>> +
>> +    if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
>> +        return;
>> +
>> +    c = &mdp->hw;
>> +
>> +    reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
>> +    for (i = 0; i < cfg->pp_count; i++) {
>> +        int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
>> +
>> +        if (pp_idx >= ARRAY_SIZE(pp_offset))
>> +            continue;
>> +
>> +        reg &= ~(0xf << pp_offset[pp_idx]);
>> +        reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
>> +    }
>> +    DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
>> +
>> +    dpu_hw_setup_vsync_source_v1(mdp, cfg);
>> +}
>> +
>>   static void dpu_hw_get_safe_status(struct dpu_hw_mdp *mdp,
>>           struct dpu_danger_safe_status *status)
>>   {
>> @@ -241,7 +256,12 @@ static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
>>       ops->setup_split_pipe = dpu_hw_setup_split_pipe;
>>       ops->setup_clk_force_ctrl = dpu_hw_setup_clk_force_ctrl;
>>       ops->get_danger_status = dpu_hw_get_danger_status;
>> -    ops->setup_vsync_source = dpu_hw_setup_vsync_source;
>> +
>> +    if (cap & BIT(DPU_MDP_VSYNC_SEL))
>> +        ops->setup_vsync_source = dpu_hw_setup_vsync_source;
>> +    else
>> +        ops->setup_vsync_source = dpu_hw_setup_vsync_source_v1;
>> +
>>       ops->get_safe_status = dpu_hw_get_safe_status;
>>         if (cap & BIT(DPU_MDP_AUDIO_SELECT))
>>
>
Dmitry Baryshkov April 20, 2023, 1:03 a.m. UTC | #3
On 20/04/2023 04:01, Konrad Dybcio wrote:
> 
> 
> On 20.04.2023 03:00, Dmitry Baryshkov wrote:
>> On 17/04/2023 23:21, Marijn Suijten wrote:
>>> Since hardware revision 5.0.0 the TE configuration moved out of the
>>> PINGPONG block into the INTF block, including vsync source selection
>>> that was previously part of MDP top.  Writing to the MDP_VSYNC_SEL
>>> register has no effect anymore and is omitted downstream via the
>>> DPU/SDE_MDP_VSYNC_SEL feature flag.  This flag is only added to INTF
>>> blocks used by hardware prior to 5.0.0.
>>>
>>> The code that writes to these registers in the INTF block will follow in
>>> subsequent patches.
>>>
>>> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
>>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>> ---
>>>    .../drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h    |  2 +-
>>>    .../gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h |  2 +-
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |  3 ++
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c         | 52 +++++++++++++++-------
>>>    4 files changed, 41 insertions(+), 18 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
>>> index b7845591c384..6906f8046b9e 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
>>> @@ -30,7 +30,7 @@ static const struct dpu_mdp_cfg msm8998_mdp[] = {
>>>        {
>>>        .name = "top_0", .id = MDP_TOP,
>>>        .base = 0x0, .len = 0x458,
>>> -    .features = 0,
>>> +    .features = BIT(DPU_MDP_VSYNC_SEL),
>>>        .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
>>>        .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
>>>        .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
>>> index 5b9b3b99f1b5..14ce397800d5 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
>>> @@ -30,7 +30,7 @@ static const struct dpu_mdp_cfg sdm845_mdp[] = {
>>>        {
>>>        .name = "top_0", .id = MDP_TOP,
>>>        .base = 0x0, .len = 0x45c,
>>> -    .features = BIT(DPU_MDP_AUDIO_SELECT),
>>> +    .features = BIT(DPU_MDP_AUDIO_SELECT) | BIT(DPU_MDP_VSYNC_SEL),
>>>        .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
>>>        .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
>>>        .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> index 71584cd56fd7..599e177b89dd 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> @@ -48,6 +48,8 @@ enum {
>>>     * @DPU_MDP_UBWC_1_5,      Universal Bandwidth compression version 1.5
>>>     * @DPU_MDP_PERIPH_0_REMOVED Indicates that access to periph top0 block results
>>>     *               in a failure
>>> + * @DPU_MDP_VSYNC_SEL      Enables vsync source selection via MDP_VSYNC_SEL register
>>> + *                         (moved into INTF block since DPU 5.0.0)
>>>     * @DPU_MDP_MAX            Maximum value
>>>       */
>>> @@ -59,6 +61,7 @@ enum {
>>>        DPU_MDP_UBWC_1_5,
>>>        DPU_MDP_AUDIO_SELECT,
>>>        DPU_MDP_PERIPH_0_REMOVED,
>>> +    DPU_MDP_VSYNC_SEL,
>>>        DPU_MDP_MAX
>>>    };
>>>    diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>>> index 2bb02e17ee52..9ea15a647a66 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>>> @@ -126,28 +126,16 @@ static void dpu_hw_get_danger_status(struct dpu_hw_mdp *mdp,
>>>        status->sspp[SSPP_CURSOR1] = (value >> 26) & 0x3;
>>>    }
>>>    -static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>>> +static void dpu_hw_setup_vsync_source_v1(struct dpu_hw_mdp *mdp,
>>>            struct dpu_vsync_source_cfg *cfg)
>>
>> In my opinion _v1 is not really descriptive here. Could you please rename it to dpu_hw_setup_vsync_source_no_vsync_sel() ?
> v1 refers to the CTL rev 100 a.k.a 1.0.0 a.k.a 1, but that's not
> yet very well formulated upstream.. if we even need it..

Yeah, but this mdp_top, not the ctl. And for CTL I'd probably rename _v1 
to _active to follow actual feature name.

> 
> Konrad
>>
>> Or maybe rename dpu_hw_setup_vsync_source() to dpu_hw_setup_vsync_source_vsync_sel() and drop _v1 from this function.
>>
>> Up to you.
>>
>>
>>>    {
>>>        struct dpu_hw_blk_reg_map *c;
>>> -    u32 reg, wd_load_value, wd_ctl, wd_ctl2, i;
>>> -    static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
>>> +    u32 reg, wd_load_value, wd_ctl, wd_ctl2;
>>>    -    if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
>>> +    if (!mdp || !cfg)
>>>            return;
>>>          c = &mdp->hw;
>>> -    reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
>>> -    for (i = 0; i < cfg->pp_count; i++) {
>>> -        int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
>>> -
>>> -        if (pp_idx >= ARRAY_SIZE(pp_offset))
>>> -            continue;
>>> -
>>> -        reg &= ~(0xf << pp_offset[pp_idx]);
>>> -        reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
>>> -    }
>>> -    DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
>>>          if (cfg->vsync_source >= DPU_VSYNC_SOURCE_WD_TIMER_4 &&
>>>                cfg->vsync_source <= DPU_VSYNC_SOURCE_WD_TIMER_0) {
>>> @@ -194,6 +182,33 @@ static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>>>        }
>>>    }
>>>    +static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>>> +        struct dpu_vsync_source_cfg *cfg)
>>> +{
>>> +    struct dpu_hw_blk_reg_map *c;
>>> +    u32 reg, i;
>>> +    static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
>>> +
>>> +    if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
>>> +        return;
>>> +
>>> +    c = &mdp->hw;
>>> +
>>> +    reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
>>> +    for (i = 0; i < cfg->pp_count; i++) {
>>> +        int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
>>> +
>>> +        if (pp_idx >= ARRAY_SIZE(pp_offset))
>>> +            continue;
>>> +
>>> +        reg &= ~(0xf << pp_offset[pp_idx]);
>>> +        reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
>>> +    }
>>> +    DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
>>> +
>>> +    dpu_hw_setup_vsync_source_v1(mdp, cfg);
>>> +}
>>> +
>>>    static void dpu_hw_get_safe_status(struct dpu_hw_mdp *mdp,
>>>            struct dpu_danger_safe_status *status)
>>>    {
>>> @@ -241,7 +256,12 @@ static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
>>>        ops->setup_split_pipe = dpu_hw_setup_split_pipe;
>>>        ops->setup_clk_force_ctrl = dpu_hw_setup_clk_force_ctrl;
>>>        ops->get_danger_status = dpu_hw_get_danger_status;
>>> -    ops->setup_vsync_source = dpu_hw_setup_vsync_source;
>>> +
>>> +    if (cap & BIT(DPU_MDP_VSYNC_SEL))
>>> +        ops->setup_vsync_source = dpu_hw_setup_vsync_source;
>>> +    else
>>> +        ops->setup_vsync_source = dpu_hw_setup_vsync_source_v1;
>>> +
>>>        ops->get_safe_status = dpu_hw_get_safe_status;
>>>          if (cap & BIT(DPU_MDP_AUDIO_SELECT))
>>>
>>
Marijn Suijten April 20, 2023, 9:51 p.m. UTC | #4
On 2023-04-20 04:03:31, Dmitry Baryshkov wrote:
[..]
> >>>    -static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
> >>> +static void dpu_hw_setup_vsync_source_v1(struct dpu_hw_mdp *mdp,
> >>>            struct dpu_vsync_source_cfg *cfg)
> >>
> >> In my opinion _v1 is not really descriptive here. Could you please rename it to dpu_hw_setup_vsync_source_no_vsync_sel() ?
> > v1 refers to the CTL rev 100 a.k.a 1.0.0 a.k.a 1, but that's not
> > yet very well formulated upstream.. if we even need it..

I think v1 just refers to "the first next variant of this function",
similar to how for example Microsoft COM APIs start without a suffix,
then get 1, 2, 3 etc appended as new variants "of the same" trickle in.

> Yeah, but this mdp_top, not the ctl. And for CTL I'd probably rename _v1 
> to _active to follow actual feature name.

Correct, I just got lazily inspired by downstream here.  There it
switches on SDE_MDP_VSYNC_SEL which is based on DPU >= 5.0.0 as
explained in the patch.

> >> Or maybe rename dpu_hw_setup_vsync_source() to dpu_hw_setup_vsync_source_vsync_sel() and drop _v1 from this function.

Maybe add _and_ in there?

> >>
> >> Up to you.

- Marijn
Dmitry Baryshkov April 20, 2023, 10:28 p.m. UTC | #5
On 21/04/2023 00:51, Marijn Suijten wrote:
> On 2023-04-20 04:03:31, Dmitry Baryshkov wrote:
> [..]
>>>>>     -static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>>>>> +static void dpu_hw_setup_vsync_source_v1(struct dpu_hw_mdp *mdp,
>>>>>             struct dpu_vsync_source_cfg *cfg)
>>>>
>>>> In my opinion _v1 is not really descriptive here. Could you please rename it to dpu_hw_setup_vsync_source_no_vsync_sel() ?
>>> v1 refers to the CTL rev 100 a.k.a 1.0.0 a.k.a 1, but that's not
>>> yet very well formulated upstream.. if we even need it..
> 
> I think v1 just refers to "the first next variant of this function",
> similar to how for example Microsoft COM APIs start without a suffix,
> then get 1, 2, 3 etc appended as new variants "of the same" trickle in.
> 
>> Yeah, but this mdp_top, not the ctl. And for CTL I'd probably rename _v1
>> to _active to follow actual feature name.
> 
> Correct, I just got lazily inspired by downstream here.  There it
> switches on SDE_MDP_VSYNC_SEL which is based on DPU >= 5.0.0 as
> explained in the patch.
> 
>>>> Or maybe rename dpu_hw_setup_vsync_source() to dpu_hw_setup_vsync_source_vsync_sel() and drop _v1 from this function.
> 
> Maybe add _and_ in there?

Either way will work.

>>>> Up to you.
> 
> - Marijn
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
index b7845591c384..6906f8046b9e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
@@ -30,7 +30,7 @@  static const struct dpu_mdp_cfg msm8998_mdp[] = {
 	{
 	.name = "top_0", .id = MDP_TOP,
 	.base = 0x0, .len = 0x458,
-	.features = 0,
+	.features = BIT(DPU_MDP_VSYNC_SEL),
 	.clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
 	.clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
 	.clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
index 5b9b3b99f1b5..14ce397800d5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
@@ -30,7 +30,7 @@  static const struct dpu_mdp_cfg sdm845_mdp[] = {
 	{
 	.name = "top_0", .id = MDP_TOP,
 	.base = 0x0, .len = 0x45c,
-	.features = BIT(DPU_MDP_AUDIO_SELECT),
+	.features = BIT(DPU_MDP_AUDIO_SELECT) | BIT(DPU_MDP_VSYNC_SEL),
 	.clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
 	.clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
 	.clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 71584cd56fd7..599e177b89dd 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -48,6 +48,8 @@  enum {
  * @DPU_MDP_UBWC_1_5,      Universal Bandwidth compression version 1.5
  * @DPU_MDP_PERIPH_0_REMOVED Indicates that access to periph top0 block results
  *			   in a failure
+ * @DPU_MDP_VSYNC_SEL      Enables vsync source selection via MDP_VSYNC_SEL register
+ *                         (moved into INTF block since DPU 5.0.0)
  * @DPU_MDP_MAX            Maximum value
 
  */
@@ -59,6 +61,7 @@  enum {
 	DPU_MDP_UBWC_1_5,
 	DPU_MDP_AUDIO_SELECT,
 	DPU_MDP_PERIPH_0_REMOVED,
+	DPU_MDP_VSYNC_SEL,
 	DPU_MDP_MAX
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
index 2bb02e17ee52..9ea15a647a66 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
@@ -126,28 +126,16 @@  static void dpu_hw_get_danger_status(struct dpu_hw_mdp *mdp,
 	status->sspp[SSPP_CURSOR1] = (value >> 26) & 0x3;
 }
 
-static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
+static void dpu_hw_setup_vsync_source_v1(struct dpu_hw_mdp *mdp,
 		struct dpu_vsync_source_cfg *cfg)
 {
 	struct dpu_hw_blk_reg_map *c;
-	u32 reg, wd_load_value, wd_ctl, wd_ctl2, i;
-	static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
+	u32 reg, wd_load_value, wd_ctl, wd_ctl2;
 
-	if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
+	if (!mdp || !cfg)
 		return;
 
 	c = &mdp->hw;
-	reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
-	for (i = 0; i < cfg->pp_count; i++) {
-		int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
-
-		if (pp_idx >= ARRAY_SIZE(pp_offset))
-			continue;
-
-		reg &= ~(0xf << pp_offset[pp_idx]);
-		reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
-	}
-	DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
 
 	if (cfg->vsync_source >= DPU_VSYNC_SOURCE_WD_TIMER_4 &&
 			cfg->vsync_source <= DPU_VSYNC_SOURCE_WD_TIMER_0) {
@@ -194,6 +182,33 @@  static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
 	}
 }
 
+static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
+		struct dpu_vsync_source_cfg *cfg)
+{
+	struct dpu_hw_blk_reg_map *c;
+	u32 reg, i;
+	static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
+
+	if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
+		return;
+
+	c = &mdp->hw;
+
+	reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
+	for (i = 0; i < cfg->pp_count; i++) {
+		int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
+
+		if (pp_idx >= ARRAY_SIZE(pp_offset))
+			continue;
+
+		reg &= ~(0xf << pp_offset[pp_idx]);
+		reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
+	}
+	DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
+
+	dpu_hw_setup_vsync_source_v1(mdp, cfg);
+}
+
 static void dpu_hw_get_safe_status(struct dpu_hw_mdp *mdp,
 		struct dpu_danger_safe_status *status)
 {
@@ -241,7 +256,12 @@  static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
 	ops->setup_split_pipe = dpu_hw_setup_split_pipe;
 	ops->setup_clk_force_ctrl = dpu_hw_setup_clk_force_ctrl;
 	ops->get_danger_status = dpu_hw_get_danger_status;
-	ops->setup_vsync_source = dpu_hw_setup_vsync_source;
+
+	if (cap & BIT(DPU_MDP_VSYNC_SEL))
+		ops->setup_vsync_source = dpu_hw_setup_vsync_source;
+	else
+		ops->setup_vsync_source = dpu_hw_setup_vsync_source_v1;
+
 	ops->get_safe_status = dpu_hw_get_safe_status;
 
 	if (cap & BIT(DPU_MDP_AUDIO_SELECT))