diff mbox series

[net-next,v7,14/16] dt-bindings: net: phy: Document support for LEDs node

Message ID 20230417151738.19426-15-ansuelsmth@gmail.com (mailing list archive)
State Not Applicable
Headers show
Series net: Add basic LED support for switch/phy | expand

Commit Message

Christian Marangi April 17, 2023, 3:17 p.m. UTC
Document support for LEDs node in phy and add an example for it.
PHY LED will have to match led pattern and should be treated as a
generic led.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 .../devicetree/bindings/net/ethernet-phy.yaml | 43 +++++++++++++++++++
 1 file changed, 43 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index ac04f8efa35c..4f574532ee13 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -197,6 +197,35 @@  properties:
       PHY's that have configurable TX internal delays. If this property is
       present then the PHY applies the TX delay.
 
+  leds:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^led@[a-f0-9]+$':
+        $ref: /schemas/leds/common.yaml#
+
+        properties:
+          reg:
+            maxItems: 1
+            description:
+              This define the LED index in the PHY or the MAC. It's really
+              driver dependent and required for ports that define multiple
+              LED for the same port.
+
+        required:
+          - reg
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - reg
 
@@ -204,6 +233,8 @@  additionalProperties: true
 
 examples:
   - |
+    #include <dt-bindings/leds/common.h>
+
     ethernet {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -219,5 +250,17 @@  examples:
             reset-gpios = <&gpio1 4 1>;
             reset-assert-us = <1000>;
             reset-deassert-us = <2000>;
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function = LED_FUNCTION_LAN;
+                    default-state = "keep";
+                };
+            };
         };
     };