| Message ID | 20230421124938.21974-7-quic_devipriy@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add PCIe support for IPQ9574 | expand |
On Fri, 21 Apr 2023 at 15:51, Devi Priya <quic_devipriy@quicinc.com> wrote: > > The IPQ9574 platform has 4 Gen3 PCIe controllers: two single-lane > and two dual-lane based on SNPS core 5.70a > The Qcom IP rev is 1.27.0 and Synopsys IP rev is 5.80a > Added a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0' > which reuses all the members of 'ops_2_9_0' except for the post_init > as the SLV_ADDR_SPACE_SIZE configuration differs between 2_9_0 > and 1_27_0. > Also, modified get_resources of 'ops 2_9_0' to get the clocks > from the device tree and modelled the post init sequence as > a common function to avoid code redundancy. > > Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> > Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > --- > Changes in V3: > - Rebased on top of linux-next/master > > drivers/pci/controller/dwc/pcie-qcom.c | 61 ++++++++++++++++++-------- > 1 file changed, 43 insertions(+), 18 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index 4ab30892f6ef..3682ecdead1f 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -107,6 +107,7 @@ > > /* PARF_SLV_ADDR_SPACE_SIZE register value */ > #define SLV_ADDR_SPACE_SZ 0x10000000 > +#define SLV_ADDR_SPACE_SZ_1_27_0 0x08000000 > > /* PARF_MHI_CLOCK_RESET_CTRL register fields */ > #define AHB_CLK_EN BIT(0) > @@ -202,10 +203,10 @@ struct qcom_pcie_resources_2_7_0 { > struct reset_control *rst; > }; > > -#define QCOM_PCIE_2_9_0_MAX_CLOCKS 5 > struct qcom_pcie_resources_2_9_0 { > - struct clk_bulk_data clks[QCOM_PCIE_2_9_0_MAX_CLOCKS]; > + struct clk_bulk_data *clks; > struct reset_control *rst; > + int num_clks; > }; > > union qcom_pcie_resources { > @@ -1050,17 +1051,10 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) > struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > struct dw_pcie *pci = pcie->pci; > struct device *dev = pci->dev; > - int ret; > > - res->clks[0].id = "iface"; > - res->clks[1].id = "axi_m"; > - res->clks[2].id = "axi_s"; > - res->clks[3].id = "axi_bridge"; > - res->clks[4].id = "rchng"; > - > - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); > - if (ret < 0) > - return ret; > + res->num_clks = devm_clk_bulk_get_all(dev, &res->clks); > + if (res->clks < 0) > + return res->num_clks; > > res->rst = devm_reset_control_array_get_exclusive(dev); > if (IS_ERR(res->rst)) > @@ -1073,7 +1067,7 @@ static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) > { > struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > > - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > + clk_bulk_disable_unprepare(res->num_clks, res->clks); > } > > static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > @@ -1102,19 +1096,16 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > > usleep_range(2000, 2500); > > - return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); > + return clk_bulk_prepare_enable(res->num_clks, res->clks); > } > > -static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > +static int qcom_pcie_post_init(struct qcom_pcie *pcie) > { > struct dw_pcie *pci = pcie->pci; > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > u32 val; > int i; > > - writel(SLV_ADDR_SPACE_SZ, > - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > - > val = readl(pcie->parf + PARF_PHY_CTRL); > val &= ~PHY_TEST_PWR_DOWN; > writel(val, pcie->parf + PARF_PHY_CTRL); > @@ -1151,6 +1142,26 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > return 0; > } > > +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie) > +{ > + writel(SLV_ADDR_SPACE_SZ_1_27_0, > + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > + > + qcom_pcie_post_init(pcie); > + > + return 0; > +} > + > +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > +{ > + writel(SLV_ADDR_SPACE_SZ, > + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > + > + qcom_pcie_post_init(pcie); > + > + return 0; > +} I'm not sure about moving the SLV_ADDR_SPACE_SIZE initialization from init() to post_init(). Probably a better solution might be to have two init() callbacks and to call the common function from both of them. > + > static int qcom_pcie_link_up(struct dw_pcie *pci) > { > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > @@ -1291,6 +1302,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = { > .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > }; > > +/* Qcom IP rev.: 1.27.0 Synopsys IP rev.: 5.80a */ > +static const struct qcom_pcie_ops ops_1_27_0 = { > + .get_resources = qcom_pcie_get_resources_2_9_0, > + .init = qcom_pcie_init_2_9_0, > + .post_init = qcom_pcie_post_init_1_27_0, > + .deinit = qcom_pcie_deinit_2_9_0, > + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > +}; > + > static const struct qcom_pcie_cfg cfg_1_0_0 = { > .ops = &ops_1_0_0, > }; > @@ -1323,6 +1343,10 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = { > .ops = &ops_2_9_0, > }; > > +static const struct qcom_pcie_cfg cfg_1_27_0 = { > + .ops = &ops_1_27_0, > +}; > + > static const struct dw_pcie_ops dw_pcie_ops = { > .link_up = qcom_pcie_link_up, > .start_link = qcom_pcie_start_link, > @@ -1607,6 +1631,7 @@ static const struct of_device_id qcom_pcie_match[] = { > { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 }, > { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 }, > { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, > + { .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 }, > { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, > { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, > { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 }, > -- > 2.17.1 >
On 4/22/2023 5:35 AM, Dmitry Baryshkov wrote: > On Fri, 21 Apr 2023 at 15:51, Devi Priya <quic_devipriy@quicinc.com> wrote: >> >> The IPQ9574 platform has 4 Gen3 PCIe controllers: two single-lane >> and two dual-lane based on SNPS core 5.70a >> The Qcom IP rev is 1.27.0 and Synopsys IP rev is 5.80a >> Added a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0' >> which reuses all the members of 'ops_2_9_0' except for the post_init >> as the SLV_ADDR_SPACE_SIZE configuration differs between 2_9_0 >> and 1_27_0. >> Also, modified get_resources of 'ops 2_9_0' to get the clocks >> from the device tree and modelled the post init sequence as >> a common function to avoid code redundancy. >> >> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> >> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >> --- >> Changes in V3: >> - Rebased on top of linux-next/master >> >> drivers/pci/controller/dwc/pcie-qcom.c | 61 ++++++++++++++++++-------- >> 1 file changed, 43 insertions(+), 18 deletions(-) >> >> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c >> index 4ab30892f6ef..3682ecdead1f 100644 >> --- a/drivers/pci/controller/dwc/pcie-qcom.c >> +++ b/drivers/pci/controller/dwc/pcie-qcom.c >> @@ -107,6 +107,7 @@ >> >> /* PARF_SLV_ADDR_SPACE_SIZE register value */ >> #define SLV_ADDR_SPACE_SZ 0x10000000 >> +#define SLV_ADDR_SPACE_SZ_1_27_0 0x08000000 >> >> /* PARF_MHI_CLOCK_RESET_CTRL register fields */ >> #define AHB_CLK_EN BIT(0) >> @@ -202,10 +203,10 @@ struct qcom_pcie_resources_2_7_0 { >> struct reset_control *rst; >> }; >> >> -#define QCOM_PCIE_2_9_0_MAX_CLOCKS 5 >> struct qcom_pcie_resources_2_9_0 { >> - struct clk_bulk_data clks[QCOM_PCIE_2_9_0_MAX_CLOCKS]; >> + struct clk_bulk_data *clks; >> struct reset_control *rst; >> + int num_clks; >> }; >> >> union qcom_pcie_resources { >> @@ -1050,17 +1051,10 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) >> struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; >> struct dw_pcie *pci = pcie->pci; >> struct device *dev = pci->dev; >> - int ret; >> >> - res->clks[0].id = "iface"; >> - res->clks[1].id = "axi_m"; >> - res->clks[2].id = "axi_s"; >> - res->clks[3].id = "axi_bridge"; >> - res->clks[4].id = "rchng"; >> - >> - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); >> - if (ret < 0) >> - return ret; >> + res->num_clks = devm_clk_bulk_get_all(dev, &res->clks); >> + if (res->clks < 0) >> + return res->num_clks; >> >> res->rst = devm_reset_control_array_get_exclusive(dev); >> if (IS_ERR(res->rst)) >> @@ -1073,7 +1067,7 @@ static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) >> { >> struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; >> >> - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); >> + clk_bulk_disable_unprepare(res->num_clks, res->clks); >> } >> >> static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) >> @@ -1102,19 +1096,16 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) >> >> usleep_range(2000, 2500); >> >> - return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); >> + return clk_bulk_prepare_enable(res->num_clks, res->clks); >> } >> >> -static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) >> +static int qcom_pcie_post_init(struct qcom_pcie *pcie) >> { >> struct dw_pcie *pci = pcie->pci; >> u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); >> u32 val; >> int i; >> >> - writel(SLV_ADDR_SPACE_SZ, >> - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); >> - >> val = readl(pcie->parf + PARF_PHY_CTRL); >> val &= ~PHY_TEST_PWR_DOWN; >> writel(val, pcie->parf + PARF_PHY_CTRL); >> @@ -1151,6 +1142,26 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) >> return 0; >> } >> >> +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie) >> +{ >> + writel(SLV_ADDR_SPACE_SZ_1_27_0, >> + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); >> + >> + qcom_pcie_post_init(pcie); >> + >> + return 0; >> +} >> + >> +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) >> +{ >> + writel(SLV_ADDR_SPACE_SZ, >> + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); >> + >> + qcom_pcie_post_init(pcie); >> + >> + return 0; >> +} > > I'm not sure about moving the SLV_ADDR_SPACE_SIZE initialization from > init() to post_init(). Probably a better solution might be to have two > init() callbacks and to call the common function from both of them. > Hi Dmitry, Originally, the SLV_ADDR_SPACE_SIZE initialization was done part of post_init() callback only and we haven't moved it from init() to post_init().We have just added two post_init() callbacks to handle the SLV_ADDR_SPACE_SIZE initialization accordingly for 1_27_0 and 2_9_0. Thanks, Devi Priya >> + >> static int qcom_pcie_link_up(struct dw_pcie *pci) >> { >> u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); >> @@ -1291,6 +1302,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = { >> .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, >> }; >> >> +/* Qcom IP rev.: 1.27.0 Synopsys IP rev.: 5.80a */ >> +static const struct qcom_pcie_ops ops_1_27_0 = { >> + .get_resources = qcom_pcie_get_resources_2_9_0, >> + .init = qcom_pcie_init_2_9_0, >> + .post_init = qcom_pcie_post_init_1_27_0, >> + .deinit = qcom_pcie_deinit_2_9_0, >> + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, >> +}; >> + >> static const struct qcom_pcie_cfg cfg_1_0_0 = { >> .ops = &ops_1_0_0, >> }; >> @@ -1323,6 +1343,10 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = { >> .ops = &ops_2_9_0, >> }; >> >> +static const struct qcom_pcie_cfg cfg_1_27_0 = { >> + .ops = &ops_1_27_0, >> +}; >> + >> static const struct dw_pcie_ops dw_pcie_ops = { >> .link_up = qcom_pcie_link_up, >> .start_link = qcom_pcie_start_link, >> @@ -1607,6 +1631,7 @@ static const struct of_device_id qcom_pcie_match[] = { >> { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 }, >> { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 }, >> { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, >> + { .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 }, >> { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, >> { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, >> { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 }, >> -- >> 2.17.1 >> > >
On Tue, 2 May 2023 at 09:36, Devi Priya <quic_devipriy@quicinc.com> wrote: > > > > On 4/22/2023 5:35 AM, Dmitry Baryshkov wrote: > > On Fri, 21 Apr 2023 at 15:51, Devi Priya <quic_devipriy@quicinc.com> wrote: > >> > >> The IPQ9574 platform has 4 Gen3 PCIe controllers: two single-lane > >> and two dual-lane based on SNPS core 5.70a > >> The Qcom IP rev is 1.27.0 and Synopsys IP rev is 5.80a > >> Added a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0' > >> which reuses all the members of 'ops_2_9_0' except for the post_init > >> as the SLV_ADDR_SPACE_SIZE configuration differs between 2_9_0 > >> and 1_27_0. > >> Also, modified get_resources of 'ops 2_9_0' to get the clocks > >> from the device tree and modelled the post init sequence as > >> a common function to avoid code redundancy. > >> > >> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> > >> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > >> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > >> --- > >> Changes in V3: > >> - Rebased on top of linux-next/master > >> > >> drivers/pci/controller/dwc/pcie-qcom.c | 61 ++++++++++++++++++-------- > >> 1 file changed, 43 insertions(+), 18 deletions(-) > >> > >> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > >> index 4ab30892f6ef..3682ecdead1f 100644 > >> --- a/drivers/pci/controller/dwc/pcie-qcom.c > >> +++ b/drivers/pci/controller/dwc/pcie-qcom.c > >> @@ -107,6 +107,7 @@ > >> > >> /* PARF_SLV_ADDR_SPACE_SIZE register value */ > >> #define SLV_ADDR_SPACE_SZ 0x10000000 > >> +#define SLV_ADDR_SPACE_SZ_1_27_0 0x08000000 > >> > >> /* PARF_MHI_CLOCK_RESET_CTRL register fields */ > >> #define AHB_CLK_EN BIT(0) > >> @@ -202,10 +203,10 @@ struct qcom_pcie_resources_2_7_0 { > >> struct reset_control *rst; > >> }; > >> > >> -#define QCOM_PCIE_2_9_0_MAX_CLOCKS 5 > >> struct qcom_pcie_resources_2_9_0 { > >> - struct clk_bulk_data clks[QCOM_PCIE_2_9_0_MAX_CLOCKS]; > >> + struct clk_bulk_data *clks; > >> struct reset_control *rst; > >> + int num_clks; > >> }; > >> > >> union qcom_pcie_resources { > >> @@ -1050,17 +1051,10 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) > >> struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > >> struct dw_pcie *pci = pcie->pci; > >> struct device *dev = pci->dev; > >> - int ret; > >> > >> - res->clks[0].id = "iface"; > >> - res->clks[1].id = "axi_m"; > >> - res->clks[2].id = "axi_s"; > >> - res->clks[3].id = "axi_bridge"; > >> - res->clks[4].id = "rchng"; > >> - > >> - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); > >> - if (ret < 0) > >> - return ret; > >> + res->num_clks = devm_clk_bulk_get_all(dev, &res->clks); > >> + if (res->clks < 0) > >> + return res->num_clks; > >> > >> res->rst = devm_reset_control_array_get_exclusive(dev); > >> if (IS_ERR(res->rst)) > >> @@ -1073,7 +1067,7 @@ static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) > >> { > >> struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > >> > >> - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > >> + clk_bulk_disable_unprepare(res->num_clks, res->clks); > >> } > >> > >> static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > >> @@ -1102,19 +1096,16 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > >> > >> usleep_range(2000, 2500); > >> > >> - return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); > >> + return clk_bulk_prepare_enable(res->num_clks, res->clks); > >> } > >> > >> -static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > >> +static int qcom_pcie_post_init(struct qcom_pcie *pcie) > >> { > >> struct dw_pcie *pci = pcie->pci; > >> u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > >> u32 val; > >> int i; > >> > >> - writel(SLV_ADDR_SPACE_SZ, > >> - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > >> - > >> val = readl(pcie->parf + PARF_PHY_CTRL); > >> val &= ~PHY_TEST_PWR_DOWN; > >> writel(val, pcie->parf + PARF_PHY_CTRL); > >> @@ -1151,6 +1142,26 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > >> return 0; > >> } > >> > >> +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie) > >> +{ > >> + writel(SLV_ADDR_SPACE_SZ_1_27_0, > >> + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > >> + > >> + qcom_pcie_post_init(pcie); > >> + > >> + return 0; > >> +} > >> + > >> +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > >> +{ > >> + writel(SLV_ADDR_SPACE_SZ, > >> + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > >> + > >> + qcom_pcie_post_init(pcie); > >> + > >> + return 0; > >> +} > > > > I'm not sure about moving the SLV_ADDR_SPACE_SIZE initialization from > > init() to post_init(). Probably a better solution might be to have two > > init() callbacks and to call the common function from both of them. > > > Hi Dmitry, Originally, the SLV_ADDR_SPACE_SIZE initialization was done > part of post_init() callback only and we haven't moved it from init() to > post_init().We have just added two post_init() callbacks to > handle the SLV_ADDR_SPACE_SIZE initialization accordingly for 1_27_0 and > 2_9_0. Ack, I see then. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On Fri, Apr 21, 2023 at 06:19:38PM +0530, Devi Priya wrote: > The IPQ9574 platform has 4 Gen3 PCIe controllers: two single-lane > and two dual-lane based on SNPS core 5.70a > The Qcom IP rev is 1.27.0 and Synopsys IP rev is 5.80a > Added a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0' > which reuses all the members of 'ops_2_9_0' except for the post_init > as the SLV_ADDR_SPACE_SIZE configuration differs between 2_9_0 > and 1_27_0. > Also, modified get_resources of 'ops 2_9_0' to get the clocks > from the device tree and modelled the post init sequence as > a common function to avoid code redundancy. > > Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> > Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> One comment below. With that fixed, Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> - Mani > --- > Changes in V3: > - Rebased on top of linux-next/master > > drivers/pci/controller/dwc/pcie-qcom.c | 61 ++++++++++++++++++-------- > 1 file changed, 43 insertions(+), 18 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index 4ab30892f6ef..3682ecdead1f 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -107,6 +107,7 @@ > > /* PARF_SLV_ADDR_SPACE_SIZE register value */ > #define SLV_ADDR_SPACE_SZ 0x10000000 > +#define SLV_ADDR_SPACE_SZ_1_27_0 0x08000000 > > /* PARF_MHI_CLOCK_RESET_CTRL register fields */ > #define AHB_CLK_EN BIT(0) > @@ -202,10 +203,10 @@ struct qcom_pcie_resources_2_7_0 { > struct reset_control *rst; > }; > > -#define QCOM_PCIE_2_9_0_MAX_CLOCKS 5 > struct qcom_pcie_resources_2_9_0 { > - struct clk_bulk_data clks[QCOM_PCIE_2_9_0_MAX_CLOCKS]; > + struct clk_bulk_data *clks; > struct reset_control *rst; > + int num_clks; > }; > > union qcom_pcie_resources { > @@ -1050,17 +1051,10 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) > struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > struct dw_pcie *pci = pcie->pci; > struct device *dev = pci->dev; > - int ret; > > - res->clks[0].id = "iface"; > - res->clks[1].id = "axi_m"; > - res->clks[2].id = "axi_s"; > - res->clks[3].id = "axi_bridge"; > - res->clks[4].id = "rchng"; > - > - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); > - if (ret < 0) > - return ret; > + res->num_clks = devm_clk_bulk_get_all(dev, &res->clks); > + if (res->clks < 0) > + return res->num_clks; Why not return proper error no? > > res->rst = devm_reset_control_array_get_exclusive(dev); > if (IS_ERR(res->rst)) > @@ -1073,7 +1067,7 @@ static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) > { > struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > > - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > + clk_bulk_disable_unprepare(res->num_clks, res->clks); > } > > static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > @@ -1102,19 +1096,16 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > > usleep_range(2000, 2500); > > - return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); > + return clk_bulk_prepare_enable(res->num_clks, res->clks); > } > > -static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > +static int qcom_pcie_post_init(struct qcom_pcie *pcie) > { > struct dw_pcie *pci = pcie->pci; > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > u32 val; > int i; > > - writel(SLV_ADDR_SPACE_SZ, > - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > - > val = readl(pcie->parf + PARF_PHY_CTRL); > val &= ~PHY_TEST_PWR_DOWN; > writel(val, pcie->parf + PARF_PHY_CTRL); > @@ -1151,6 +1142,26 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > return 0; > } > > +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie) > +{ > + writel(SLV_ADDR_SPACE_SZ_1_27_0, > + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > + > + qcom_pcie_post_init(pcie); > + > + return 0; > +} > + > +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > +{ > + writel(SLV_ADDR_SPACE_SZ, > + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > + > + qcom_pcie_post_init(pcie); > + > + return 0; > +} > + > static int qcom_pcie_link_up(struct dw_pcie *pci) > { > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > @@ -1291,6 +1302,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = { > .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > }; > > +/* Qcom IP rev.: 1.27.0 Synopsys IP rev.: 5.80a */ > +static const struct qcom_pcie_ops ops_1_27_0 = { > + .get_resources = qcom_pcie_get_resources_2_9_0, > + .init = qcom_pcie_init_2_9_0, > + .post_init = qcom_pcie_post_init_1_27_0, > + .deinit = qcom_pcie_deinit_2_9_0, > + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > +}; > + > static const struct qcom_pcie_cfg cfg_1_0_0 = { > .ops = &ops_1_0_0, > }; > @@ -1323,6 +1343,10 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = { > .ops = &ops_2_9_0, > }; > > +static const struct qcom_pcie_cfg cfg_1_27_0 = { > + .ops = &ops_1_27_0, > +}; > + > static const struct dw_pcie_ops dw_pcie_ops = { > .link_up = qcom_pcie_link_up, > .start_link = qcom_pcie_start_link, > @@ -1607,6 +1631,7 @@ static const struct of_device_id qcom_pcie_match[] = { > { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 }, > { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 }, > { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, > + { .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 }, > { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, > { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, > { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 }, > -- > 2.17.1 >
On Mon, 8 May 2023 at 15:21, Manivannan Sadhasivam <mani@kernel.org> wrote: > > On Fri, Apr 21, 2023 at 06:19:38PM +0530, Devi Priya wrote: > > The IPQ9574 platform has 4 Gen3 PCIe controllers: two single-lane > > and two dual-lane based on SNPS core 5.70a > > The Qcom IP rev is 1.27.0 and Synopsys IP rev is 5.80a > > Added a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0' > > which reuses all the members of 'ops_2_9_0' except for the post_init > > as the SLV_ADDR_SPACE_SIZE configuration differs between 2_9_0 > > and 1_27_0. > > Also, modified get_resources of 'ops 2_9_0' to get the clocks > > from the device tree and modelled the post init sequence as > > a common function to avoid code redundancy. > > > > Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> > > Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > > One comment below. With that fixed, > > Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> > > - Mani > > > --- > > Changes in V3: > > - Rebased on top of linux-next/master > > > > drivers/pci/controller/dwc/pcie-qcom.c | 61 ++++++++++++++++++-------- > > 1 file changed, 43 insertions(+), 18 deletions(-) > > > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > > index 4ab30892f6ef..3682ecdead1f 100644 > > --- a/drivers/pci/controller/dwc/pcie-qcom.c > > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > > @@ -107,6 +107,7 @@ > > > > /* PARF_SLV_ADDR_SPACE_SIZE register value */ > > #define SLV_ADDR_SPACE_SZ 0x10000000 > > +#define SLV_ADDR_SPACE_SZ_1_27_0 0x08000000 > > > > /* PARF_MHI_CLOCK_RESET_CTRL register fields */ > > #define AHB_CLK_EN BIT(0) > > @@ -202,10 +203,10 @@ struct qcom_pcie_resources_2_7_0 { > > struct reset_control *rst; > > }; > > > > -#define QCOM_PCIE_2_9_0_MAX_CLOCKS 5 > > struct qcom_pcie_resources_2_9_0 { > > - struct clk_bulk_data clks[QCOM_PCIE_2_9_0_MAX_CLOCKS]; > > + struct clk_bulk_data *clks; > > struct reset_control *rst; > > + int num_clks; > > }; > > > > union qcom_pcie_resources { > > @@ -1050,17 +1051,10 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) > > struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > > struct dw_pcie *pci = pcie->pci; > > struct device *dev = pci->dev; > > - int ret; > > > > - res->clks[0].id = "iface"; > > - res->clks[1].id = "axi_m"; > > - res->clks[2].id = "axi_s"; > > - res->clks[3].id = "axi_bridge"; > > - res->clks[4].id = "rchng"; > > - > > - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); > > - if (ret < 0) > > - return ret; > > + res->num_clks = devm_clk_bulk_get_all(dev, &res->clks); > > + if (res->clks < 0) > > + return res->num_clks; > > Why not return proper error no? Instead the question should be, why not the proper condition: it tells `if (res->clks < 0)', while it should be `if (res->num_clks < 0)'. > > > > > res->rst = devm_reset_control_array_get_exclusive(dev); > > if (IS_ERR(res->rst)) > > @@ -1073,7 +1067,7 @@ static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) > > { > > struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > > > > - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > > + clk_bulk_disable_unprepare(res->num_clks, res->clks); > > } > > > > static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > > @@ -1102,19 +1096,16 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > > > > usleep_range(2000, 2500); > > > > - return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); > > + return clk_bulk_prepare_enable(res->num_clks, res->clks); > > } > > > > -static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > > +static int qcom_pcie_post_init(struct qcom_pcie *pcie) > > { > > struct dw_pcie *pci = pcie->pci; > > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > > u32 val; > > int i; > > > > - writel(SLV_ADDR_SPACE_SZ, > > - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > > - > > val = readl(pcie->parf + PARF_PHY_CTRL); > > val &= ~PHY_TEST_PWR_DOWN; > > writel(val, pcie->parf + PARF_PHY_CTRL); > > @@ -1151,6 +1142,26 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > > return 0; > > } > > > > +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie) > > +{ > > + writel(SLV_ADDR_SPACE_SZ_1_27_0, > > + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > > + > > + qcom_pcie_post_init(pcie); > > + > > + return 0; > > +} > > + > > +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > > +{ > > + writel(SLV_ADDR_SPACE_SZ, > > + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > > + > > + qcom_pcie_post_init(pcie); > > + > > + return 0; > > +} > > + > > static int qcom_pcie_link_up(struct dw_pcie *pci) > > { > > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > > @@ -1291,6 +1302,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = { > > .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > > }; > > > > +/* Qcom IP rev.: 1.27.0 Synopsys IP rev.: 5.80a */ > > +static const struct qcom_pcie_ops ops_1_27_0 = { > > + .get_resources = qcom_pcie_get_resources_2_9_0, > > + .init = qcom_pcie_init_2_9_0, > > + .post_init = qcom_pcie_post_init_1_27_0, > > + .deinit = qcom_pcie_deinit_2_9_0, > > + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > > +}; > > + > > static const struct qcom_pcie_cfg cfg_1_0_0 = { > > .ops = &ops_1_0_0, > > }; > > @@ -1323,6 +1343,10 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = { > > .ops = &ops_2_9_0, > > }; > > > > +static const struct qcom_pcie_cfg cfg_1_27_0 = { > > + .ops = &ops_1_27_0, > > +}; > > + > > static const struct dw_pcie_ops dw_pcie_ops = { > > .link_up = qcom_pcie_link_up, > > .start_link = qcom_pcie_start_link, > > @@ -1607,6 +1631,7 @@ static const struct of_device_id qcom_pcie_match[] = { > > { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 }, > > { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 }, > > { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, > > + { .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 }, > > { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, > > { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, > > { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 }, > > -- > > 2.17.1 > > > > -- > மணிவண்ணன் சதாசிவம்
On Mon, May 08, 2023 at 03:46:53PM +0300, Dmitry Baryshkov wrote: > On Mon, 8 May 2023 at 15:21, Manivannan Sadhasivam <mani@kernel.org> wrote: > > > > On Fri, Apr 21, 2023 at 06:19:38PM +0530, Devi Priya wrote: > > > The IPQ9574 platform has 4 Gen3 PCIe controllers: two single-lane > > > and two dual-lane based on SNPS core 5.70a > > > The Qcom IP rev is 1.27.0 and Synopsys IP rev is 5.80a > > > Added a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0' > > > which reuses all the members of 'ops_2_9_0' except for the post_init > > > as the SLV_ADDR_SPACE_SIZE configuration differs between 2_9_0 > > > and 1_27_0. > > > Also, modified get_resources of 'ops 2_9_0' to get the clocks > > > from the device tree and modelled the post init sequence as > > > a common function to avoid code redundancy. > > > > > > Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> > > > Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > > > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > > > > One comment below. With that fixed, > > > > Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> > > > > - Mani > > > > > --- > > > Changes in V3: > > > - Rebased on top of linux-next/master > > > > > > drivers/pci/controller/dwc/pcie-qcom.c | 61 ++++++++++++++++++-------- > > > 1 file changed, 43 insertions(+), 18 deletions(-) > > > > > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > > > index 4ab30892f6ef..3682ecdead1f 100644 > > > --- a/drivers/pci/controller/dwc/pcie-qcom.c > > > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > > > @@ -107,6 +107,7 @@ > > > > > > /* PARF_SLV_ADDR_SPACE_SIZE register value */ > > > #define SLV_ADDR_SPACE_SZ 0x10000000 > > > +#define SLV_ADDR_SPACE_SZ_1_27_0 0x08000000 > > > > > > /* PARF_MHI_CLOCK_RESET_CTRL register fields */ > > > #define AHB_CLK_EN BIT(0) > > > @@ -202,10 +203,10 @@ struct qcom_pcie_resources_2_7_0 { > > > struct reset_control *rst; > > > }; > > > > > > -#define QCOM_PCIE_2_9_0_MAX_CLOCKS 5 > > > struct qcom_pcie_resources_2_9_0 { > > > - struct clk_bulk_data clks[QCOM_PCIE_2_9_0_MAX_CLOCKS]; > > > + struct clk_bulk_data *clks; > > > struct reset_control *rst; > > > + int num_clks; > > > }; > > > > > > union qcom_pcie_resources { > > > @@ -1050,17 +1051,10 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) > > > struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > > > struct dw_pcie *pci = pcie->pci; > > > struct device *dev = pci->dev; > > > - int ret; > > > > > > - res->clks[0].id = "iface"; > > > - res->clks[1].id = "axi_m"; > > > - res->clks[2].id = "axi_s"; > > > - res->clks[3].id = "axi_bridge"; > > > - res->clks[4].id = "rchng"; > > > - > > > - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); > > > - if (ret < 0) > > > - return ret; > > > + res->num_clks = devm_clk_bulk_get_all(dev, &res->clks); > > > + if (res->clks < 0) > > > + return res->num_clks; > > > > Why not return proper error no? > > Instead the question should be, why not the proper condition: it tells > `if (res->clks < 0)', while it should be `if (res->num_clks < 0)'. > Heh. I completely overlooked that part. Yes, the if condition itself should be fixed. - Mani > > > > > > > > res->rst = devm_reset_control_array_get_exclusive(dev); > > > if (IS_ERR(res->rst)) > > > @@ -1073,7 +1067,7 @@ static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) > > > { > > > struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > > > > > > - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > > > + clk_bulk_disable_unprepare(res->num_clks, res->clks); > > > } > > > > > > static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > > > @@ -1102,19 +1096,16 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > > > > > > usleep_range(2000, 2500); > > > > > > - return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); > > > + return clk_bulk_prepare_enable(res->num_clks, res->clks); > > > } > > > > > > -static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > > > +static int qcom_pcie_post_init(struct qcom_pcie *pcie) > > > { > > > struct dw_pcie *pci = pcie->pci; > > > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > > > u32 val; > > > int i; > > > > > > - writel(SLV_ADDR_SPACE_SZ, > > > - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > > > - > > > val = readl(pcie->parf + PARF_PHY_CTRL); > > > val &= ~PHY_TEST_PWR_DOWN; > > > writel(val, pcie->parf + PARF_PHY_CTRL); > > > @@ -1151,6 +1142,26 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > > > return 0; > > > } > > > > > > +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie) > > > +{ > > > + writel(SLV_ADDR_SPACE_SZ_1_27_0, > > > + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > > > + > > > + qcom_pcie_post_init(pcie); > > > + > > > + return 0; > > > +} > > > + > > > +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > > > +{ > > > + writel(SLV_ADDR_SPACE_SZ, > > > + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > > > + > > > + qcom_pcie_post_init(pcie); > > > + > > > + return 0; > > > +} > > > + > > > static int qcom_pcie_link_up(struct dw_pcie *pci) > > > { > > > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > > > @@ -1291,6 +1302,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = { > > > .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > > > }; > > > > > > +/* Qcom IP rev.: 1.27.0 Synopsys IP rev.: 5.80a */ > > > +static const struct qcom_pcie_ops ops_1_27_0 = { > > > + .get_resources = qcom_pcie_get_resources_2_9_0, > > > + .init = qcom_pcie_init_2_9_0, > > > + .post_init = qcom_pcie_post_init_1_27_0, > > > + .deinit = qcom_pcie_deinit_2_9_0, > > > + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > > > +}; > > > + > > > static const struct qcom_pcie_cfg cfg_1_0_0 = { > > > .ops = &ops_1_0_0, > > > }; > > > @@ -1323,6 +1343,10 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = { > > > .ops = &ops_2_9_0, > > > }; > > > > > > +static const struct qcom_pcie_cfg cfg_1_27_0 = { > > > + .ops = &ops_1_27_0, > > > +}; > > > + > > > static const struct dw_pcie_ops dw_pcie_ops = { > > > .link_up = qcom_pcie_link_up, > > > .start_link = qcom_pcie_start_link, > > > @@ -1607,6 +1631,7 @@ static const struct of_device_id qcom_pcie_match[] = { > > > { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 }, > > > { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 }, > > > { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, > > > + { .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 }, > > > { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, > > > { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, > > > { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 }, > > > -- > > > 2.17.1 > > > > > > > -- > > மணிவண்ணன் சதாசிவம் > > > > -- > With best wishes > Dmitry
On 5/8/2023 9:07 PM, Manivannan Sadhasivam wrote: > On Mon, May 08, 2023 at 03:46:53PM +0300, Dmitry Baryshkov wrote: >> On Mon, 8 May 2023 at 15:21, Manivannan Sadhasivam <mani@kernel.org> wrote: >>> >>> On Fri, Apr 21, 2023 at 06:19:38PM +0530, Devi Priya wrote: >>>> The IPQ9574 platform has 4 Gen3 PCIe controllers: two single-lane >>>> and two dual-lane based on SNPS core 5.70a >>>> The Qcom IP rev is 1.27.0 and Synopsys IP rev is 5.80a >>>> Added a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0' >>>> which reuses all the members of 'ops_2_9_0' except for the post_init >>>> as the SLV_ADDR_SPACE_SIZE configuration differs between 2_9_0 >>>> and 1_27_0. >>>> Also, modified get_resources of 'ops 2_9_0' to get the clocks >>>> from the device tree and modelled the post init sequence as >>>> a common function to avoid code redundancy. >>>> >>>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> >>>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >>>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >>> >>> One comment below. With that fixed, >>> >>> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> >>> >>> - Mani >>> >>>> --- >>>> Changes in V3: >>>> - Rebased on top of linux-next/master >>>> >>>> drivers/pci/controller/dwc/pcie-qcom.c | 61 ++++++++++++++++++-------- >>>> 1 file changed, 43 insertions(+), 18 deletions(-) >>>> >>>> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c >>>> index 4ab30892f6ef..3682ecdead1f 100644 >>>> --- a/drivers/pci/controller/dwc/pcie-qcom.c >>>> +++ b/drivers/pci/controller/dwc/pcie-qcom.c >>>> @@ -107,6 +107,7 @@ >>>> >>>> /* PARF_SLV_ADDR_SPACE_SIZE register value */ >>>> #define SLV_ADDR_SPACE_SZ 0x10000000 >>>> +#define SLV_ADDR_SPACE_SZ_1_27_0 0x08000000 >>>> >>>> /* PARF_MHI_CLOCK_RESET_CTRL register fields */ >>>> #define AHB_CLK_EN BIT(0) >>>> @@ -202,10 +203,10 @@ struct qcom_pcie_resources_2_7_0 { >>>> struct reset_control *rst; >>>> }; >>>> >>>> -#define QCOM_PCIE_2_9_0_MAX_CLOCKS 5 >>>> struct qcom_pcie_resources_2_9_0 { >>>> - struct clk_bulk_data clks[QCOM_PCIE_2_9_0_MAX_CLOCKS]; >>>> + struct clk_bulk_data *clks; >>>> struct reset_control *rst; >>>> + int num_clks; >>>> }; >>>> >>>> union qcom_pcie_resources { >>>> @@ -1050,17 +1051,10 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) >>>> struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; >>>> struct dw_pcie *pci = pcie->pci; >>>> struct device *dev = pci->dev; >>>> - int ret; >>>> >>>> - res->clks[0].id = "iface"; >>>> - res->clks[1].id = "axi_m"; >>>> - res->clks[2].id = "axi_s"; >>>> - res->clks[3].id = "axi_bridge"; >>>> - res->clks[4].id = "rchng"; >>>> - >>>> - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); >>>> - if (ret < 0) >>>> - return ret; >>>> + res->num_clks = devm_clk_bulk_get_all(dev, &res->clks); >>>> + if (res->clks < 0) >>>> + return res->num_clks; >>> >>> Why not return proper error no? >> >> Instead the question should be, why not the proper condition: it tells >> `if (res->clks < 0)', while it should be `if (res->num_clks < 0)'. >> > > Heh. I completely overlooked that part. Yes, the if condition itself should be > fixed. > > - Mani Sure, will fix it up! Regards, Devi Priya > >>> >>>> >>>> res->rst = devm_reset_control_array_get_exclusive(dev); >>>> if (IS_ERR(res->rst)) >>>> @@ -1073,7 +1067,7 @@ static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) >>>> { >>>> struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; >>>> >>>> - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); >>>> + clk_bulk_disable_unprepare(res->num_clks, res->clks); >>>> } >>>> >>>> static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) >>>> @@ -1102,19 +1096,16 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) >>>> >>>> usleep_range(2000, 2500); >>>> >>>> - return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); >>>> + return clk_bulk_prepare_enable(res->num_clks, res->clks); >>>> } >>>> >>>> -static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) >>>> +static int qcom_pcie_post_init(struct qcom_pcie *pcie) >>>> { >>>> struct dw_pcie *pci = pcie->pci; >>>> u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); >>>> u32 val; >>>> int i; >>>> >>>> - writel(SLV_ADDR_SPACE_SZ, >>>> - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); >>>> - >>>> val = readl(pcie->parf + PARF_PHY_CTRL); >>>> val &= ~PHY_TEST_PWR_DOWN; >>>> writel(val, pcie->parf + PARF_PHY_CTRL); >>>> @@ -1151,6 +1142,26 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) >>>> return 0; >>>> } >>>> >>>> +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie) >>>> +{ >>>> + writel(SLV_ADDR_SPACE_SZ_1_27_0, >>>> + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); >>>> + >>>> + qcom_pcie_post_init(pcie); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) >>>> +{ >>>> + writel(SLV_ADDR_SPACE_SZ, >>>> + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); >>>> + >>>> + qcom_pcie_post_init(pcie); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> static int qcom_pcie_link_up(struct dw_pcie *pci) >>>> { >>>> u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); >>>> @@ -1291,6 +1302,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = { >>>> .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, >>>> }; >>>> >>>> +/* Qcom IP rev.: 1.27.0 Synopsys IP rev.: 5.80a */ >>>> +static const struct qcom_pcie_ops ops_1_27_0 = { >>>> + .get_resources = qcom_pcie_get_resources_2_9_0, >>>> + .init = qcom_pcie_init_2_9_0, >>>> + .post_init = qcom_pcie_post_init_1_27_0, >>>> + .deinit = qcom_pcie_deinit_2_9_0, >>>> + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, >>>> +}; >>>> + >>>> static const struct qcom_pcie_cfg cfg_1_0_0 = { >>>> .ops = &ops_1_0_0, >>>> }; >>>> @@ -1323,6 +1343,10 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = { >>>> .ops = &ops_2_9_0, >>>> }; >>>> >>>> +static const struct qcom_pcie_cfg cfg_1_27_0 = { >>>> + .ops = &ops_1_27_0, >>>> +}; >>>> + >>>> static const struct dw_pcie_ops dw_pcie_ops = { >>>> .link_up = qcom_pcie_link_up, >>>> .start_link = qcom_pcie_start_link, >>>> @@ -1607,6 +1631,7 @@ static const struct of_device_id qcom_pcie_match[] = { >>>> { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 }, >>>> { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 }, >>>> { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, >>>> + { .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 }, >>>> { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, >>>> { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, >>>> { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 }, >>>> -- >>>> 2.17.1 >>>> >>> >>> -- >>> மணிவண்ணன் சதாசிவம் >> >> >> >> -- >> With best wishes >> Dmitry >
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 4ab30892f6ef..3682ecdead1f 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -107,6 +107,7 @@ /* PARF_SLV_ADDR_SPACE_SIZE register value */ #define SLV_ADDR_SPACE_SZ 0x10000000 +#define SLV_ADDR_SPACE_SZ_1_27_0 0x08000000 /* PARF_MHI_CLOCK_RESET_CTRL register fields */ #define AHB_CLK_EN BIT(0) @@ -202,10 +203,10 @@ struct qcom_pcie_resources_2_7_0 { struct reset_control *rst; }; -#define QCOM_PCIE_2_9_0_MAX_CLOCKS 5 struct qcom_pcie_resources_2_9_0 { - struct clk_bulk_data clks[QCOM_PCIE_2_9_0_MAX_CLOCKS]; + struct clk_bulk_data *clks; struct reset_control *rst; + int num_clks; }; union qcom_pcie_resources { @@ -1050,17 +1051,10 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; struct dw_pcie *pci = pcie->pci; struct device *dev = pci->dev; - int ret; - res->clks[0].id = "iface"; - res->clks[1].id = "axi_m"; - res->clks[2].id = "axi_s"; - res->clks[3].id = "axi_bridge"; - res->clks[4].id = "rchng"; - - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); - if (ret < 0) - return ret; + res->num_clks = devm_clk_bulk_get_all(dev, &res->clks); + if (res->clks < 0) + return res->num_clks; res->rst = devm_reset_control_array_get_exclusive(dev); if (IS_ERR(res->rst)) @@ -1073,7 +1067,7 @@ static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) { struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); + clk_bulk_disable_unprepare(res->num_clks, res->clks); } static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) @@ -1102,19 +1096,16 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) usleep_range(2000, 2500); - return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); + return clk_bulk_prepare_enable(res->num_clks, res->clks); } -static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) +static int qcom_pcie_post_init(struct qcom_pcie *pcie) { struct dw_pcie *pci = pcie->pci; u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); u32 val; int i; - writel(SLV_ADDR_SPACE_SZ, - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); - val = readl(pcie->parf + PARF_PHY_CTRL); val &= ~PHY_TEST_PWR_DOWN; writel(val, pcie->parf + PARF_PHY_CTRL); @@ -1151,6 +1142,26 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) return 0; } +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie) +{ + writel(SLV_ADDR_SPACE_SZ_1_27_0, + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); + + qcom_pcie_post_init(pcie); + + return 0; +} + +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) +{ + writel(SLV_ADDR_SPACE_SZ, + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); + + qcom_pcie_post_init(pcie); + + return 0; +} + static int qcom_pcie_link_up(struct dw_pcie *pci) { u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); @@ -1291,6 +1302,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = { .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, }; +/* Qcom IP rev.: 1.27.0 Synopsys IP rev.: 5.80a */ +static const struct qcom_pcie_ops ops_1_27_0 = { + .get_resources = qcom_pcie_get_resources_2_9_0, + .init = qcom_pcie_init_2_9_0, + .post_init = qcom_pcie_post_init_1_27_0, + .deinit = qcom_pcie_deinit_2_9_0, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + static const struct qcom_pcie_cfg cfg_1_0_0 = { .ops = &ops_1_0_0, }; @@ -1323,6 +1343,10 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = { .ops = &ops_2_9_0, }; +static const struct qcom_pcie_cfg cfg_1_27_0 = { + .ops = &ops_1_27_0, +}; + static const struct dw_pcie_ops dw_pcie_ops = { .link_up = qcom_pcie_link_up, .start_link = qcom_pcie_start_link, @@ -1607,6 +1631,7 @@ static const struct of_device_id qcom_pcie_match[] = { { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 }, { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 }, { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, + { .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 }, { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 },