diff mbox series

[v3,4/5] arm64: dts: qcom: sm6115: Add EUD dt node and dwc3 connector

Message ID 20230504082644.1461582-5-bhupesh.sharma@linaro.org (mailing list archive)
State Superseded
Headers show
Series Add Qualcomm SM6115 / SM4250 EUD dt-bindings & driver support | expand

Commit Message

Bhupesh Sharma May 4, 2023, 8:26 a.m. UTC
Add the Embedded USB Debugger(EUD) device tree node for
SM6115 / SM4250 SoC.

The node contains EUD base register region, EUD mode manager
register region and TCSR Base register region along with the
interrupt entry.

Also add the typec connector node for EUD which is attached to
EUD node via port. EUD is also attached to DWC3 node via port.

To enable the role switch, we need to set dr_mode = "otg" property
for 'usb_dwc3' sub-node in the board dts file.

Also the EUD device can be enabled on a board once linux is boot'ed
by setting:
 $ echo 1 > /sys/bus/platform/drivers/qcom_eud/../enable

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 48 ++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

Comments

Konrad Dybcio May 4, 2023, 9:53 a.m. UTC | #1
On 4.05.2023 10:26, Bhupesh Sharma wrote:
> Add the Embedded USB Debugger(EUD) device tree node for
> SM6115 / SM4250 SoC.
> 
> The node contains EUD base register region, EUD mode manager
> register region and TCSR Base register region along with the
> interrupt entry.
> 
> Also add the typec connector node for EUD which is attached to
> EUD node via port. EUD is also attached to DWC3 node via port.
> 
> To enable the role switch, we need to set dr_mode = "otg" property
> for 'usb_dwc3' sub-node in the board dts file.
> 
> Also the EUD device can be enabled on a board once linux is boot'ed
> by setting:
>  $ echo 1 > /sys/bus/platform/drivers/qcom_eud/../enable
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 48 ++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index f67863561f3f..6865342fc42f 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -180,6 +180,18 @@ core3 {
>  		};
>  	};
>  
> +	eud_typec: connector {
> +		compatible = "usb-c-connector";
> +
> +		ports {
> +			port@0 {
> +				con_eud: endpoint {
> +					remote-endpoint = <&eud_con>;
> +				};
> +			};
> +		};
> +	};
> +
>  	firmware {
>  		scm: scm {
>  			compatible = "qcom,scm-sm6115", "qcom,scm";
> @@ -647,6 +659,35 @@ gcc: clock-controller@1400000 {
>  			#power-domain-cells = <1>;
>  		};
>  
> +		eud: eud@1610000 {
> +			compatible = "qcom,sm6115-eud", "qcom,eud";
> +			reg = <0x0 0x01610000 0x0 0x2000>,
> +			      <0x0 0x01612000 0x0 0x1000>,
> +			      <0x0 0x003c0000 0x0 0x40000>;
> +			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,secure-mode-enable;
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
Please insert a newline before each child node.

Konrad
> +					eud_ep: endpoint {
> +						remote-endpoint = <&usb2_role_switch>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +					eud_con: endpoint {
> +						remote-endpoint = <&con_eud>;
> +					};
> +				};
> +			};
> +		};
> +
>  		usb_hsphy: phy@1613000 {
>  			compatible = "qcom,sm6115-qusb2-phy";
>  			reg = <0x0 0x01613000 0x0 0x180>;
> @@ -1144,6 +1185,13 @@ usb_dwc3: usb@4e00000 {
>  				snps,has-lpm-erratum;
>  				snps,hird-threshold = /bits/ 8 <0x10>;
>  				snps,usb3_lpm_capable;
> +				usb-role-switch;
> +
> +				port {
> +					usb2_role_switch: endpoint {
> +						remote-endpoint = <&eud_ep>;
> +					};
> +				};
>  			};
>  		};
>
Bhupesh Sharma May 4, 2023, 10:21 a.m. UTC | #2
On Thu, 4 May 2023 at 15:23, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> On 4.05.2023 10:26, Bhupesh Sharma wrote:
> > Add the Embedded USB Debugger(EUD) device tree node for
> > SM6115 / SM4250 SoC.
> >
> > The node contains EUD base register region, EUD mode manager
> > register region and TCSR Base register region along with the
> > interrupt entry.
> >
> > Also add the typec connector node for EUD which is attached to
> > EUD node via port. EUD is also attached to DWC3 node via port.
> >
> > To enable the role switch, we need to set dr_mode = "otg" property
> > for 'usb_dwc3' sub-node in the board dts file.
> >
> > Also the EUD device can be enabled on a board once linux is boot'ed
> > by setting:
> >  $ echo 1 > /sys/bus/platform/drivers/qcom_eud/../enable
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sm6115.dtsi | 48 ++++++++++++++++++++++++++++
> >  1 file changed, 48 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > index f67863561f3f..6865342fc42f 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > @@ -180,6 +180,18 @@ core3 {
> >               };
> >       };
> >
> > +     eud_typec: connector {
> > +             compatible = "usb-c-connector";
> > +
> > +             ports {
> > +                     port@0 {
> > +                             con_eud: endpoint {
> > +                                     remote-endpoint = <&eud_con>;
> > +                             };
> > +                     };
> > +             };
> > +     };
> > +
> >       firmware {
> >               scm: scm {
> >                       compatible = "qcom,scm-sm6115", "qcom,scm";
> > @@ -647,6 +659,35 @@ gcc: clock-controller@1400000 {
> >                       #power-domain-cells = <1>;
> >               };
> >
> > +             eud: eud@1610000 {
> > +                     compatible = "qcom,sm6115-eud", "qcom,eud";
> > +                     reg = <0x0 0x01610000 0x0 0x2000>,
> > +                           <0x0 0x01612000 0x0 0x1000>,
> > +                           <0x0 0x003c0000 0x0 0x40000>;
> > +                     interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
> > +                     qcom,secure-mode-enable;
> > +                     status = "disabled";
> > +
> > +                     ports {
> > +                             #address-cells = <1>;
> > +                             #size-cells = <0>;
> > +
> > +                             port@0 {
> > +                                     reg = <0>;
> Please insert a newline before each child node.

Ok, I will do it in next version.

Thanks,
Bhupesh
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index f67863561f3f..6865342fc42f 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -180,6 +180,18 @@  core3 {
 		};
 	};
 
+	eud_typec: connector {
+		compatible = "usb-c-connector";
+
+		ports {
+			port@0 {
+				con_eud: endpoint {
+					remote-endpoint = <&eud_con>;
+				};
+			};
+		};
+	};
+
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm6115", "qcom,scm";
@@ -647,6 +659,35 @@  gcc: clock-controller@1400000 {
 			#power-domain-cells = <1>;
 		};
 
+		eud: eud@1610000 {
+			compatible = "qcom,sm6115-eud", "qcom,eud";
+			reg = <0x0 0x01610000 0x0 0x2000>,
+			      <0x0 0x01612000 0x0 0x1000>,
+			      <0x0 0x003c0000 0x0 0x40000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,secure-mode-enable;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					eud_ep: endpoint {
+						remote-endpoint = <&usb2_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					eud_con: endpoint {
+						remote-endpoint = <&con_eud>;
+					};
+				};
+			};
+		};
+
 		usb_hsphy: phy@1613000 {
 			compatible = "qcom,sm6115-qusb2-phy";
 			reg = <0x0 0x01613000 0x0 0x180>;
@@ -1144,6 +1185,13 @@  usb_dwc3: usb@4e00000 {
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				usb-role-switch;
+
+				port {
+					usb2_role_switch: endpoint {
+						remote-endpoint = <&eud_ep>;
+					};
+				};
 			};
 		};