| Message ID | 20230508160446.2374438-4-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ARM: dts: qcom: apq8074-dragonboard: enable additional devices | expand |
On 8.05.2023 18:04, Dmitry Baryshkov wrote: > Wrap existing pwrkey and new resin nodes into the new pon node to enable > volume-down key support on platforms using pm8941 PMIC. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm/boot/dts/qcom-pm8941.dtsi | 22 +++++++++++++++++----- > 1 file changed, 17 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi > index a821f0368a28..cf1fcf97fa88 100644 > --- a/arch/arm/boot/dts/qcom-pm8941.dtsi > +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi > @@ -19,12 +19,24 @@ rtc@6000 { > interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; > }; > > - pwrkey@800 { > - compatible = "qcom,pm8941-pwrkey"; > + pon@800 { > + compatible = "qcom,pm8941-pon"; > reg = <0x800>; > - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > - debounce = <15625>; > - bias-pull-up; > + > + pwrkey { > + compatible = "qcom,pm8941-pwrkey"; > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + }; > + > + pm8941_resin: resin { > + compatible = "qcom,pm8941-resin"; > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + status = "disabled"; > + }; > }; > > usb_id: usb-detect@900 {
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index a821f0368a28..cf1fcf97fa88 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -19,12 +19,24 @@ rtc@6000 { interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; + pon@800 { + compatible = "qcom,pm8941-pon"; reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + + pm8941_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; usb_id: usb-detect@900 {
Wrap existing pwrkey and new resin nodes into the new pon node to enable volume-down key support on platforms using pm8941 PMIC. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm/boot/dts/qcom-pm8941.dtsi | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)