| Message ID | 20230510031930.1996020-2-quic_bjorande@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | phy: qcom-qmp-combo: Support orientation switching | expand |
On 10/05/2023 05:19, Bjorn Andersson wrote: > The QMP combo phy can be connected to a TCPM, a USB controller and a > DisplayPort controller for handling USB Type-C orientation switching > and propagating HPD signals. > > Extend the binding to allow these connections to be described. > > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> > Tested-by: Abel Vesa <abel.vesa@linaro.org> > Tested-by: Steev Klimaszewski <steev@kali.org> > Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450 > Tested-by: Johan Hovold <johan+linaro@kernel.org> # X13s > --- > > Changes since v1: > - Corrected port $ref > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index 3cd5fc3e8fab..ef1c02d8ac88 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -60,6 +60,26 @@ properties: description: See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h + orientation-switch: + description: + Flag the PHY as possible handler of USB Type-C orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the PHY + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the USB controller + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the DisplayPort controller + required: - compatible - reg @@ -98,6 +118,37 @@ examples: vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + orientation-switch; + #clock-cells = <1>; #phy-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&typec_connector_ss>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&dwc3_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&mdss_dp_out>; + }; + }; + }; };