| Message ID | 20230519085723.15601-2-quic_devipriy@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add support for PCIe PHY in IPQ9574 | expand |
On Fri, 19 May 2023 14:27:22 +0530, Devi Priya wrote: > Add bindings for the PCIe QMP PHYs found on IPQ9574. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > --- > Changes in V2: > - Picked up the R-b tag > - Did not convert the clock IDs to numerical values as the clock > header (dependent patch) is merged in latest rc1. > > .../phy/qcom,ipq9574-qmp-pcie-phy.yaml | 90 +++++++++++++++++++ > 1 file changed, 90 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.example.dts:29.26-27 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1512: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230519085723.15601-2-quic_devipriy@quicinc.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 5/19/2023 2:53 PM, Rob Herring wrote: > > On Fri, 19 May 2023 14:27:22 +0530, Devi Priya wrote: >> Add bindings for the PCIe QMP PHYs found on IPQ9574. >> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >> --- >> Changes in V2: >> - Picked up the R-b tag >> - Did not convert the clock IDs to numerical values as the clock >> header (dependent patch) is merged in latest rc1. >> >> .../phy/qcom,ipq9574-qmp-pcie-phy.yaml | 90 +++++++++++++++++++ >> 1 file changed, 90 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml >> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Error: Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.example.dts:29.26-27 syntax error > FATAL ERROR: Unable to parse input tree > make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.example.dtb] Error 1 > make[1]: *** Waiting for unfinished jobs.... > make: *** [Makefile:1512: dt_binding_check] Error 2 > Sorry, The PCIe clocks are added part of the below series: https://lore.kernel.org/linux-arm-msm/20230519090219.15925-1-quic_devipriy@quicinc.com/ Thanks, Devi Priya > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230519085723.15601-2-quic_devipriy@quicinc.com > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. >
On 19/05/2023 11:57, Devi Priya wrote: > Add bindings for the PCIe QMP PHYs found on IPQ9574. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > --- > Changes in V2: > - Picked up the R-b tag > - Did not convert the clock IDs to numerical values as the clock > header (dependent patch) is merged in latest rc1. > > .../phy/qcom,ipq9574-qmp-pcie-phy.yaml | 90 +++++++++++++++++++ > 1 file changed, 90 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml > > diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml > new file mode 100644 > index 000000000000..7c8012647051 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml > @@ -0,0 +1,90 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/qcom,ipq9574-qmp-pcie-phy.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm QMP PHY controller (PCIe, IPQ9574) > + > +maintainers: > + - Vinod Koul <vkoul@kernel.org> > + > +description: > + The QMP PHY controller supports physical layer functionality for a number of > + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. > + > +properties: > + compatible: > + enum: > + - qcom,ipq9574-qmp-gen3x1-pcie-phy > + - qcom,ipq9574-qmp-gen3x2-pcie-phy > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 5 > + > + clock-names: > + items: > + - const: aux > + - const: cfg_ahb > + - const: anoc_lane > + - const: snoc_lane > + - const: pipe Could you please reorder the clocks in the following way: - aux - cfg_ahb - pipe - .. the rest This will allow us to use this schema for other IPQ QMP PCIe PHYs. > + > + resets: > + maxItems: 2 > + > + reset-names: > + items: > + - const: phy > + - const: common > + > + "#clock-cells": > + const: 0 > + > + clock-output-names: > + maxItems: 1 > + > + "#phy-cells": > + const: 0 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - resets > + - reset-names > + - "#clock-cells" > + - clock-output-names > + - "#phy-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,ipq9574-gcc.h> > + #include <dt-bindings/reset/qcom,ipq9574-gcc.h> > + > + pcie0_phy: phy@84000 { > + compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy"; > + reg = <0x00084000 0x1000>; > + > + clocks = <&gcc GCC_PCIE0_AUX_CLK>, > + <&gcc GCC_PCIE0_AHB_CLK>, > + <&gcc GCC_ANOC_PCIE0_1LANE_M_CLK>, > + <&gcc GCC_SNOC_PCIE0_1LANE_S_CLK>, > + <&gcc GCC_PCIE0_PIPE_CLK>; > + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe"; > + > + resets = <&gcc GCC_PCIE0_PHY_BCR>, > + <&gcc GCC_PCIE0PHY_PHY_BCR>; > + reset-names = "phy", "common"; > + > + #clock-cells = <0>; > + clock-output-names = "gcc_pcie0_pipe_clk_src"; > + > + #phy-cells = <0>; > + };
On 5/22/2023 2:27 AM, Dmitry Baryshkov wrote: > On 19/05/2023 11:57, Devi Priya wrote: >> Add bindings for the PCIe QMP PHYs found on IPQ9574. >> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >> --- >> Changes in V2: >> - Picked up the R-b tag >> - Did not convert the clock IDs to numerical values as the clock >> header (dependent patch) is merged in latest rc1. >> >> .../phy/qcom,ipq9574-qmp-pcie-phy.yaml | 90 +++++++++++++++++++ >> 1 file changed, 90 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml >> >> diff --git >> a/Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml >> b/Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml >> new file mode 100644 >> index 000000000000..7c8012647051 >> --- /dev/null >> +++ >> b/Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml >> @@ -0,0 +1,90 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/phy/qcom,ipq9574-qmp-pcie-phy.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm QMP PHY controller (PCIe, IPQ9574) >> + >> +maintainers: >> + - Vinod Koul <vkoul@kernel.org> >> + >> +description: >> + The QMP PHY controller supports physical layer functionality for a >> number of >> + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. >> + >> +properties: >> + compatible: >> + enum: >> + - qcom,ipq9574-qmp-gen3x1-pcie-phy >> + - qcom,ipq9574-qmp-gen3x2-pcie-phy >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + maxItems: 5 >> + >> + clock-names: >> + items: >> + - const: aux >> + - const: cfg_ahb >> + - const: anoc_lane >> + - const: snoc_lane >> + - const: pipe > > Could you please reorder the clocks in the following way: > - aux > - cfg_ahb > - pipe > - .. the rest > > This will allow us to use this schema for other IPQ QMP PCIe PHYs. Sure, will update. Thanks, Devi Priya > >> + >> + resets: >> + maxItems: 2 >> + >> + reset-names: >> + items: >> + - const: phy >> + - const: common >> + >> + "#clock-cells": >> + const: 0 >> + >> + clock-output-names: >> + maxItems: 1 >> + >> + "#phy-cells": >> + const: 0 >> + >> +required: >> + - compatible >> + - reg >> + - clocks >> + - clock-names >> + - resets >> + - reset-names >> + - "#clock-cells" >> + - clock-output-names >> + - "#phy-cells" >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/clock/qcom,ipq9574-gcc.h> >> + #include <dt-bindings/reset/qcom,ipq9574-gcc.h> >> + >> + pcie0_phy: phy@84000 { >> + compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy"; >> + reg = <0x00084000 0x1000>; >> + >> + clocks = <&gcc GCC_PCIE0_AUX_CLK>, >> + <&gcc GCC_PCIE0_AHB_CLK>, >> + <&gcc GCC_ANOC_PCIE0_1LANE_M_CLK>, >> + <&gcc GCC_SNOC_PCIE0_1LANE_S_CLK>, >> + <&gcc GCC_PCIE0_PIPE_CLK>; >> + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe"; >> + >> + resets = <&gcc GCC_PCIE0_PHY_BCR>, >> + <&gcc GCC_PCIE0PHY_PHY_BCR>; >> + reset-names = "phy", "common"; >> + >> + #clock-cells = <0>; >> + clock-output-names = "gcc_pcie0_pipe_clk_src"; >> + >> + #phy-cells = <0>; >> + }; >
On Fri, 19 May 2023 14:27:22 +0530, Devi Priya wrote: > Add bindings for the PCIe QMP PHYs found on IPQ9574. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > --- > Changes in V2: > - Picked up the R-b tag > - Did not convert the clock IDs to numerical values as the clock > header (dependent patch) is merged in latest rc1. > > .../phy/qcom,ipq9574-qmp-pcie-phy.yaml | 90 +++++++++++++++++++ > 1 file changed, 90 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.example.dts:29.26-27 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1512: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1783652 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml new file mode 100644 index 000000000000..7c8012647051 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,ipq9574-qmp-pcie-phy.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,ipq9574-qmp-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QMP PHY controller (PCIe, IPQ9574) + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + The QMP PHY controller supports physical layer functionality for a number of + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +properties: + compatible: + enum: + - qcom,ipq9574-qmp-gen3x1-pcie-phy + - qcom,ipq9574-qmp-gen3x2-pcie-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 5 + + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: anoc_lane + - const: snoc_lane + - const: pipe + + resets: + maxItems: 2 + + reset-names: + items: + - const: phy + - const: common + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - "#clock-cells" + - clock-output-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,ipq9574-gcc.h> + #include <dt-bindings/reset/qcom,ipq9574-gcc.h> + + pcie0_phy: phy@84000 { + compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy"; + reg = <0x00084000 0x1000>; + + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_ANOC_PCIE0_1LANE_M_CLK>, + <&gcc GCC_SNOC_PCIE0_1LANE_S_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe"; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + + #phy-cells = <0>; + };