diff mbox series

[v4,4/4] arm64: dts: qcom: sm8550-qrd: enable PMIC Volume and Power buttons

Message ID 20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-4-a288f24af81b@linaro.org (mailing list archive)
State Accepted
Headers show
Series arm64: qcom: sm8550: enable PMIC devices | expand

Commit Message

Neil Armstrong June 12, 2023, 3:22 p.m. UTC 
The Volume Down & Power buttons are controlled by the PMIC via
the PON hardware, and the Volume Up is connected to a PMIC gpio.

Enable the necessary hardware and setup the GPIO state for the
Volume Up gpio key.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 36 +++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index efff15225e67..cde2ab8b18a4 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -54,6 +54,22 @@  chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
 	pmic-glink {
 		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
 		#address-cells = <1>;
@@ -516,6 +532,16 @@  led-1 {
 	};
 };
 
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
 &pm8550_pwm {
 	status = "okay";
 
@@ -548,6 +574,16 @@  &pm8550b_eusb2_repeater {
 	vdd3-supply = <&vreg_l5b_3p1>;
 };
 
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
 &pcie_1_phy_aux_clk {
 	clock-frequency = <1000>;
 };