diff mbox series

[v8,07/11] arm64: dts: qcom: sm6115: Add Crypto Engine support

Message ID 20230526192210.3146896-8-bhupesh.sharma@linaro.org (mailing list archive)
State Accepted
Headers show
Series arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs | expand

Commit Message

Bhupesh Sharma May 26, 2023, 7:22 p.m. UTC
Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm6115.dtsi'.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 31 ++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

Comments

Konrad Dybcio May 26, 2023, 8:49 p.m. UTC | #1
On 26.05.2023 21:22, Bhupesh Sharma wrote:
> Add crypto engine (CE) and CE BAM related nodes and definitions to
> 'sm6115.dtsi'.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Tested-by: Anders Roxell <anders.roxell@linaro.org>
> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 31 ++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 43f31c1b9d5a..2aa148340277 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -663,6 +663,37 @@ usb_hsphy: phy@1613000 {
>  			status = "disabled";
>  		};
>  
> +		cryptobam: dma-controller@1b04000 {
> +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> +			reg = <0x0 0x01b04000 0x0 0x24000>;
> +			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
> +			clock-names = "bam_clk";
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +			qcom,controlled-remotely;
> +			iommus = <&apps_smmu 0x92 0>,
> +				 <&apps_smmu 0x94 0x11>,
> +				 <&apps_smmu 0x96 0x11>,
> +				 <&apps_smmu 0x98 0x1>,
> +				 <&apps_smmu 0x9F 0>;
> +		};
> +
> +		crypto: crypto@1b3a000 {
> +			compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce";
> +			reg = <0x0 0x01b3a000 0x0 0x6000>;
> +			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
> +			clock-names = "core";
> +
> +			dmas = <&cryptobam 6>, <&cryptobam 7>;
> +			dma-names = "rx", "tx";
> +			iommus = <&apps_smmu 0x92 0>,
> +				 <&apps_smmu 0x94 0x11>,
> +				 <&apps_smmu 0x96 0x11>,
> +				 <&apps_smmu 0x98 0x1>,
> +				 <&apps_smmu 0x9F 0>;
Nit: masks should be hex (0 -> 0x0) and the 0x9F could be lowercase

Konrad
> +		};
> +
>  		qfprom@1b40000 {
>  			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
>  			reg = <0x0 0x01b40000 0x0 0x7000>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 43f31c1b9d5a..2aa148340277 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -663,6 +663,37 @@  usb_hsphy: phy@1613000 {
 			status = "disabled";
 		};
 
+		cryptobam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01b04000 0x0 0x24000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x92 0>,
+				 <&apps_smmu 0x94 0x11>,
+				 <&apps_smmu 0x96 0x11>,
+				 <&apps_smmu 0x98 0x1>,
+				 <&apps_smmu 0x9F 0>;
+		};
+
+		crypto: crypto@1b3a000 {
+			compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce";
+			reg = <0x0 0x01b3a000 0x0 0x6000>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x92 0>,
+				 <&apps_smmu 0x94 0x11>,
+				 <&apps_smmu 0x96 0x11>,
+				 <&apps_smmu 0x98 0x1>,
+				 <&apps_smmu 0x9F 0>;
+		};
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b40000 0x0 0x7000>;