| Message ID | 20230601120029.38859-1-abel.vesa@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs | expand |
On 1.06.2023 14:00, Abel Vesa wrote: > The USB HCs nodes are missing the interconnect paths, so add them. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index 197c016aaeba..4e73808c7bb1 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -3595,6 +3595,10 @@ usb_1: usb@a6f8800 { > > resets = <&gcc GCC_USB30_PRIM_BCR>; > > + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; > + interconnect-names = "usb-ddr", "apps-usb"; You need to update interconnect-cells to 2. Konrad > + > usb_1_dwc3: usb@a600000 { > compatible = "snps,dwc3"; > reg = <0 0x0a600000 0 0xcd00>; > @@ -3644,6 +3648,10 @@ usb_2: usb@a8f8800 { > > resets = <&gcc GCC_USB30_SEC_BCR>; > > + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; > + interconnect-names = "usb-ddr", "apps-usb"; > + > usb_2_dwc3: usb@a800000 { > compatible = "snps,dwc3"; > reg = <0 0x0a800000 0 0xcd00>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 197c016aaeba..4e73808c7bb1 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -3595,6 +3595,10 @@ usb_1: usb@a6f8800 { resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -3644,6 +3648,10 @@ usb_2: usb@a8f8800 { resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>;
The USB HCs nodes are missing the interconnect paths, so add them. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)