| Message ID | 20230612173758.286411-2-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | [1/2] arm64: dts: qcom: sm8550-qrd: add sound card | expand |
On 12.06.2023 19:37, Krzysztof Kozlowski wrote: > Add the sound card node with tested playback over WSA8845 speakers and > WCD9385 headset over USB Type-C. The recording links were not tested, > but should be similar to previous platforms. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Not tested on hardware. Should be the same as on QRD8550. > --- For that reason: Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 81 +++++++++++++++++++++++++ > 1 file changed, 81 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > index 54f8957499a3..34b548b3e43d 100644 > --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > @@ -95,6 +95,87 @@ pmic_glink_sbu: endpoint { > }; > }; > > + sound { > + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; > + model = "SM8550-MTP"; > + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", > + "SpkrRight IN", "WSA_SPK2 OUT", > + "IN1_HPHL", "HPHL_OUT", > + "IN2_HPHR", "HPHR_OUT", > + "AMIC2", "MIC BIAS2", > + "VA DMIC0", "MIC BIAS1", > + "VA DMIC1", "MIC BIAS1", > + "VA DMIC2", "MIC BIAS3", > + "TX DMIC0", "MIC BIAS1", > + "TX DMIC1", "MIC BIAS2", > + "TX DMIC2", "MIC BIAS3", > + "TX SWR_ADC1", "ADC2_OUTPUT"; > + > + wcd-playback-dai-link { > + link-name = "WCD Playback"; > + > + cpu { > + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; > + }; > + > + codec { > + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + wcd-capture-dai-link { > + link-name = "WCD Capture"; > + > + cpu { > + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; > + }; > + > + codec { > + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + wsa-dai-link { > + link-name = "WSA Playback"; > + > + cpu { > + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; > + }; > + > + codec { > + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + va-dai-link { > + link-name = "VA Capture"; > + > + cpu { > + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; > + }; > + > + codec { > + sound-dai = <&lpass_vamacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + }; > + > vph_pwr: vph-pwr-regulator { > compatible = "regulator-fixed"; > regulator-name = "vph_pwr";
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 54f8957499a3..34b548b3e43d 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -95,6 +95,87 @@ pmic_glink_sbu: endpoint { }; }; + sound { + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; + model = "SM8550-MTP"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr";
Add the sound card node with tested playback over WSA8845 speakers and WCD9385 headset over USB Type-C. The recording links were not tested, but should be similar to previous platforms. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Not tested on hardware. Should be the same as on QRD8550. --- arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 81 +++++++++++++++++++++++++ 1 file changed, 81 insertions(+)