| Message ID | 20230612221456.1887533-2-quic_bjorande@quicinc.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | arm64: dts: qcom: sc8180x: USB TypeC plumbing | expand |
On 13.06.2023 00:14, Bjorn Andersson wrote: > Define anchors for wiring up the USB Type-C graph in the board files. > > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/sc8180x.dtsi | 48 +++++++++++++++++++++++++++ > 1 file changed, 48 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi > index a7668f9e68d6..4144beb70cb4 100644 > --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi > @@ -2464,6 +2464,23 @@ usb_prim_qmpphy: phy@88e9000 { > > status = "disabled"; > > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + usb_prim_qmpphy_out: endpoint {}; > + }; > + > + port@2 { > + reg = <2>; > + > + usb_prim_qmpphy_dp_in: endpoint {}; > + }; > + }; > + > usb_prim_ssphy: usb3-phy@88e9200 { > reg = <0 0x088e9200 0 0x200>, > <0 0x088e9400 0 0x200>, > @@ -2513,6 +2530,23 @@ usb_sec_qmpphy: phy@88ee000 { > > status = "disabled"; > > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + usb_sec_qmpphy_out: endpoint {}; > + }; > + > + port@2 { > + reg = <2>; > + > + usb_sec_qmpphy_dp_in: endpoint {}; > + }; > + }; > + > usb_sec_ssphy: usb3-phy@88e9200 { > reg = <0 0x088ee200 0 0x200>, > <0 0x088ee400 0 0x200>, > @@ -2607,6 +2641,11 @@ usb_prim_dwc3: usb@a600000 { > snps,dis_enblslpm_quirk; > phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>; > phy-names = "usb2-phy", "usb3-phy"; > + > + port { > + usb_prim_role_switch: endpoint { > + }; > + }; > }; > }; > > @@ -2659,6 +2698,11 @@ usb_sec_dwc3: usb@a800000 { > snps,dis_enblslpm_quirk; > phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>; > phy-names = "usb2-phy", "usb3-phy"; > + > + port { > + usb_sec_role_switch: endpoint { > + }; > + }; > }; > }; > > @@ -2986,6 +3030,8 @@ dp0_in: endpoint { > > port@1 { > reg = <1>; > + mdss_dp0_out: endpoint { > + }; > }; > }; > > @@ -3060,6 +3106,8 @@ dp1_in: endpoint { > > port@1 { > reg = <1>; > + mdss_dp1_out: endpoint { > + }; > }; > }; >
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index a7668f9e68d6..4144beb70cb4 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -2464,6 +2464,23 @@ usb_prim_qmpphy: phy@88e9000 { status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_prim_qmpphy_out: endpoint {}; + }; + + port@2 { + reg = <2>; + + usb_prim_qmpphy_dp_in: endpoint {}; + }; + }; + usb_prim_ssphy: usb3-phy@88e9200 { reg = <0 0x088e9200 0 0x200>, <0 0x088e9400 0 0x200>, @@ -2513,6 +2530,23 @@ usb_sec_qmpphy: phy@88ee000 { status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_sec_qmpphy_out: endpoint {}; + }; + + port@2 { + reg = <2>; + + usb_sec_qmpphy_dp_in: endpoint {}; + }; + }; + usb_sec_ssphy: usb3-phy@88e9200 { reg = <0 0x088ee200 0 0x200>, <0 0x088ee400 0 0x200>, @@ -2607,6 +2641,11 @@ usb_prim_dwc3: usb@a600000 { snps,dis_enblslpm_quirk; phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>; phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_prim_role_switch: endpoint { + }; + }; }; }; @@ -2659,6 +2698,11 @@ usb_sec_dwc3: usb@a800000 { snps,dis_enblslpm_quirk; phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>; phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_sec_role_switch: endpoint { + }; + }; }; }; @@ -2986,6 +3030,8 @@ dp0_in: endpoint { port@1 { reg = <1>; + mdss_dp0_out: endpoint { + }; }; }; @@ -3060,6 +3106,8 @@ dp1_in: endpoint { port@1 { reg = <1>; + mdss_dp1_out: endpoint { + }; }; };
Define anchors for wiring up the USB Type-C graph in the board files. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> --- arch/arm64/boot/dts/qcom/sc8180x.dtsi | 48 +++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)