diff mbox series

[1/4] pcie: qcom: Fix the macro PARF_SLV_ADDR_SPACE_SIZE_2_3_3

Message ID 20230623093445.3977772-2-quic_srichara@quicinc.com (mailing list archive)
State Superseded
Headers show
Series IPQ8074 pcie/wcss fixes | expand

Commit Message

Sricharan Ramabadhran June 23, 2023, 9:34 a.m. UTC
PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro used for IPQ8074
pcie slave addr size was initially set to 0x358, but
was wrongly changed to 0x168 as a part of
'PCI: qcom: Sort and group registers and bitfield definitions'
Fixing it back to right value here.

Without this pcie bring up on IPQ8074 is broken now.

Fixes: 769e49d87b15 ("PCI: qcom: Sort and group registers and bitfield definitions")
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Bjorn Helgaas June 23, 2023, 5:42 p.m. UTC | #1
On Fri, Jun 23, 2023 at 03:04:42PM +0530, Sricharan Ramabadhran wrote:
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro used for IPQ8074
> pcie slave addr size was initially set to 0x358, but
> was wrongly changed to 0x168 as a part of
> 'PCI: qcom: Sort and group registers and bitfield definitions'
> Fixing it back to right value here.
> 
> Without this pcie bring up on IPQ8074 is broken now.
> 
> Fixes: 769e49d87b15 ("PCI: qcom: Sort and group registers and bitfield definitions")

769e49d87b15 appeared in v6.4-rc1, so ideally this would get merged
before v6.4 releases on Monday.  I can try to do that, given an ack
from Manivannan.

> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4ab30892f6ef..59823beed13f 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -43,7 +43,7 @@
>  #define PARF_PHY_REFCLK				0x4c
>  #define PARF_CONFIG_BITS			0x50
>  #define PARF_DBI_BASE_ADDR			0x168
> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16c /* Register offset specific to IP ver 2.3.3 */
> +#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x358 /* Register offset specific to IP ver 2.3.3 */
>  #define PARF_MHI_CLOCK_RESET_CTRL		0x174
>  #define PARF_AXI_MSTR_WR_ADDR_HALT		0x178
>  #define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8
> -- 
> 2.34.1
>
Bjorn Helgaas June 23, 2023, 6 p.m. UTC | #2
On Fri, Jun 23, 2023 at 03:04:42PM +0530, Sricharan Ramabadhran wrote:
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro used for IPQ8074
> pcie slave addr size was initially set to 0x358, but
> was wrongly changed to 0x168 as a part of
> 'PCI: qcom: Sort and group registers and bitfield definitions'
> Fixing it back to right value here.

1) Make your subject line match the history.  For example, you're
fixing 769e49d87b15 ("PCI: qcom: Sort and group registers ..."), so
your subject line should start with "PCI: qcom: ...".

2) It doesn't look like 769e49d87b15 changed
PARF_SLV_ADDR_SPACE_SIZE_2_3_3:

  $ git show 769e49d87b15 | grep PARF_SLV_ADDR_SPACE_SIZE_2_3_3
  +#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16C /* Register offset specific to IP ver 2.3.3 */
  -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16C /* Register offset specific to IP rev 2.3.3 */

What am I missing here?  Do you have another out-of-tree patch that
broke this?

Bjorn

> Without this pcie bring up on IPQ8074 is broken now.
> 
> Fixes: 769e49d87b15 ("PCI: qcom: Sort and group registers and bitfield definitions")
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4ab30892f6ef..59823beed13f 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -43,7 +43,7 @@
>  #define PARF_PHY_REFCLK				0x4c
>  #define PARF_CONFIG_BITS			0x50
>  #define PARF_DBI_BASE_ADDR			0x168
> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16c /* Register offset specific to IP ver 2.3.3 */
> +#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x358 /* Register offset specific to IP ver 2.3.3 */
>  #define PARF_MHI_CLOCK_RESET_CTRL		0x174
>  #define PARF_AXI_MSTR_WR_ADDR_HALT		0x178
>  #define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8
> -- 
> 2.34.1
>
Manivannan Sadhasivam June 24, 2023, 6:32 a.m. UTC | #3
On Fri, Jun 23, 2023 at 03:04:42PM +0530, Sricharan Ramabadhran wrote:
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro used for IPQ8074
> pcie slave addr size was initially set to 0x358, but
> was wrongly changed to 0x168 as a part of
> 'PCI: qcom: Sort and group registers and bitfield definitions'
> Fixing it back to right value here.
> 
> Without this pcie bring up on IPQ8074 is broken now.
> 

Subject prefix should be: "PCI: qcom: "

> Fixes: 769e49d87b15 ("PCI: qcom: Sort and group registers and bitfield definitions")

Fixes tag is referring to a wrong commit. Correct one is:
39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")

> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4ab30892f6ef..59823beed13f 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -43,7 +43,7 @@
>  #define PARF_PHY_REFCLK				0x4c
>  #define PARF_CONFIG_BITS			0x50
>  #define PARF_DBI_BASE_ADDR			0x168
> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16c /* Register offset specific to IP ver 2.3.3 */
> +#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x358 /* Register offset specific to IP ver 2.3.3 */

You should just remove PARF_SLV_ADDR_SPACE_SIZE_2_3_3 and use
PARF_SLV_ADDR_SPACE_SIZE which already has the value of 0x358.

- Mani

>  #define PARF_MHI_CLOCK_RESET_CTRL		0x174
>  #define PARF_AXI_MSTR_WR_ADDR_HALT		0x178
>  #define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8
> -- 
> 2.34.1
>
Sricharan Ramabadhran June 30, 2023, 5:22 a.m. UTC | #4
Hi Bjorn,

On 6/23/2023 11:30 PM, Bjorn Helgaas wrote:
> On Fri, Jun 23, 2023 at 03:04:42PM +0530, Sricharan Ramabadhran wrote:
>> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro used for IPQ8074
>> pcie slave addr size was initially set to 0x358, but
>> was wrongly changed to 0x168 as a part of
>> 'PCI: qcom: Sort and group registers and bitfield definitions'
>> Fixing it back to right value here.
> 
> 1) Make your subject line match the history.  For example, you're
> fixing 769e49d87b15 ("PCI: qcom: Sort and group registers ..."), so
> your subject line should start with "PCI: qcom: ...".
> 

  ok, will fix.

> 2) It doesn't look like 769e49d87b15 changed
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3:
> 
>    $ git show 769e49d87b15 | grep PARF_SLV_ADDR_SPACE_SIZE_2_3_3
>    +#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16C /* Register offset specific to IP ver 2.3.3 */
>    -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16C /* Register offset specific to IP rev 2.3.3 */
> 
> What am I missing here?  Do you have another out-of-tree patch that
> broke this?

  39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from
                register definitions") broke it. Will change and post .

Regards,
  Sricharan
Sricharan Ramabadhran June 30, 2023, 5:24 a.m. UTC | #5
On 6/24/2023 12:02 PM, Manivannan Sadhasivam wrote:
> On Fri, Jun 23, 2023 at 03:04:42PM +0530, Sricharan Ramabadhran wrote:
>> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro used for IPQ8074
>> pcie slave addr size was initially set to 0x358, but
>> was wrongly changed to 0x168 as a part of
>> 'PCI: qcom: Sort and group registers and bitfield definitions'
>> Fixing it back to right value here.
>>
>> Without this pcie bring up on IPQ8074 is broken now.
>>
> 
> Subject prefix should be: "PCI: qcom: "
> 
>> Fixes: 769e49d87b15 ("PCI: qcom: Sort and group registers and bitfield definitions")
> 
> Fixes tag is referring to a wrong commit. Correct one is:
> 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
> 

  ok.

>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> ---
>>   drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
>> index 4ab30892f6ef..59823beed13f 100644
>> --- a/drivers/pci/controller/dwc/pcie-qcom.c
>> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
>> @@ -43,7 +43,7 @@
>>   #define PARF_PHY_REFCLK				0x4c
>>   #define PARF_CONFIG_BITS			0x50
>>   #define PARF_DBI_BASE_ADDR			0x168
>> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16c /* Register offset specific to IP ver 2.3.3 */
>> +#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x358 /* Register offset specific to IP ver 2.3.3 */
> 
> You should just remove PARF_SLV_ADDR_SPACE_SIZE_2_3_3 and use
> PARF_SLV_ADDR_SPACE_SIZE which already has the value of 0x358.
> 

  ok

Regards,
  Sricharan
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 4ab30892f6ef..59823beed13f 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -43,7 +43,7 @@ 
 #define PARF_PHY_REFCLK				0x4c
 #define PARF_CONFIG_BITS			0x50
 #define PARF_DBI_BASE_ADDR			0x168
-#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16c /* Register offset specific to IP ver 2.3.3 */
+#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x358 /* Register offset specific to IP ver 2.3.3 */
 #define PARF_MHI_CLOCK_RESET_CTRL		0x174
 #define PARF_AXI_MSTR_WR_ADDR_HALT		0x178
 #define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8