diff mbox series

[V2,3/5] clk: qcom: gcc-qdu1000: Update GCC clocks as per the latest hw version

Message ID 20230628092837.3090801-4-quic_imrashai@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Update GCC clocks for QDU1000 and QRU1000 SoCs | expand

Commit Message

Imran Shaik June 28, 2023, 9:28 a.m. UTC 
Add support for gcc_ddrss_ecpri_gsi_clk and update the GCC clkref clocks
as per the latest hardware version of QDU1000 and QRU100 SoCs.

Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
---
Changes since v1:
 - Newly added

 drivers/clk/qcom/gcc-qdu1000.c | 32 ++++++++++++++++++++++++++------
 1 file changed, 26 insertions(+), 6 deletions(-)

Comments

Konrad Dybcio June 28, 2023, 11:06 a.m. UTC | #1 
On 28.06.2023 11:28, Imran Shaik wrote:
> Add support for gcc_ddrss_ecpri_gsi_clk and update the GCC clkref clocks
> as per the latest hardware version of QDU1000 and QRU100 SoCs.
> 
> Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
> Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
> ---
> Changes since v1:
>  - Newly added
> 
>  drivers/clk/qcom/gcc-qdu1000.c | 32 ++++++++++++++++++++++++++------
>  1 file changed, 26 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-qdu1000.c b/drivers/clk/qcom/gcc-qdu1000.c
> index c00d26a3e6df..991fb2bc97e9 100644
> --- a/drivers/clk/qcom/gcc-qdu1000.c
> +++ b/drivers/clk/qcom/gcc-qdu1000.c
> @@ -1131,6 +1131,26 @@ static struct clk_branch gcc_ddrss_ecpri_dma_clk = {
>  	},
>  };
>  
> +static struct clk_branch gcc_ddrss_ecpri_gsi_clk = {
> +	.halt_reg = 0x54298,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.hwcg_reg = 0x54298,
> +	.hwcg_bit = 1,
> +	.clkr = {
> +		.enable_reg = 0x54298,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(const struct clk_init_data) {
> +			.name = "gcc_ddrss_ecpri_gsi_clk",
> +			.parent_hws = (const struct clk_hw*[]) {
> +				&gcc_aggre_noc_ecpri_gsi_clk_src.clkr.hw,
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_aon_ops,
> +		},
> +	},
> +};
> +
>  static struct clk_branch gcc_ecpri_ahb_clk = {
>  	.halt_reg = 0x3a008,
>  	.halt_check = BRANCH_HALT_VOTED,
> @@ -1447,14 +1467,13 @@ static struct clk_branch gcc_pcie_0_cfg_ahb_clk = {
>  
>  static struct clk_branch gcc_pcie_0_clkref_en = {
>  	.halt_reg = 0x9c004,
> -	.halt_bit = 31,
> -	.halt_check = BRANCH_HALT_ENABLE,
> +	.halt_check = BRANCH_HALT,
>  	.clkr = {
>  		.enable_reg = 0x9c004,
>  		.enable_mask = BIT(0),
>  		.hw.init = &(const struct clk_init_data) {
>  			.name = "gcc_pcie_0_clkref_en",
> -			.ops = &clk_branch_ops,
> +			.ops = &clk_branch2_ops,
This sounds like a separate fix, clk_branch_ops seems to only concern
10+yo chips.

Konrad
>  		},
>  	},
>  };
> @@ -2274,14 +2293,13 @@ static struct clk_branch gcc_tsc_etu_clk = {
>  
>  static struct clk_branch gcc_usb2_clkref_en = {
>  	.halt_reg = 0x9c008,
> -	.halt_bit = 31,
> -	.halt_check = BRANCH_HALT_ENABLE,
> +	.halt_check = BRANCH_HALT,
>  	.clkr = {
>  		.enable_reg = 0x9c008,
>  		.enable_mask = BIT(0),
>  		.hw.init = &(const struct clk_init_data) {
>  			.name = "gcc_usb2_clkref_en",
> -			.ops = &clk_branch_ops,
> +			.ops = &clk_branch2_ops,
>  		},
>  	},
>  };
> @@ -2523,6 +2541,8 @@ static struct clk_regmap *gcc_qdu1000_clocks[] = {
>  	[GCC_AGGRE_NOC_ECPRI_GSI_CLK] = &gcc_aggre_noc_ecpri_gsi_clk.clkr,
>  	[GCC_PCIE_0_PHY_AUX_CLK_SRC] = &gcc_pcie_0_phy_aux_clk_src.clkr,
>  	[GCC_PCIE_0_PIPE_CLK_SRC] = &gcc_pcie_0_pipe_clk_src.clkr,
> +	[GCC_GPLL1_OUT_EVEN] = &gcc_gpll1_out_even.clkr,
> +	[GCC_DDRSS_ECPRI_GSI_CLK] = &gcc_ddrss_ecpri_gsi_clk.clkr,
>  };
>  
>  static const struct qcom_reset_map gcc_qdu1000_resets[] = {
Imran Shaik July 6, 2023, 10:51 a.m. UTC | #2 
On 6/28/2023 4:36 PM, Konrad Dybcio wrote:
> On 28.06.2023 11:28, Imran Shaik wrote:
>> Add support for gcc_ddrss_ecpri_gsi_clk and update the GCC clkref clocks
>> as per the latest hardware version of QDU1000 and QRU100 SoCs.
>>
>> Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
>> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
>> Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
>> ---
>> Changes since v1:
>>   - Newly added
>>
>>   drivers/clk/qcom/gcc-qdu1000.c | 32 ++++++++++++++++++++++++++------
>>   1 file changed, 26 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/clk/qcom/gcc-qdu1000.c b/drivers/clk/qcom/gcc-qdu1000.c
>> index c00d26a3e6df..991fb2bc97e9 100644
>> --- a/drivers/clk/qcom/gcc-qdu1000.c
>> +++ b/drivers/clk/qcom/gcc-qdu1000.c
>> @@ -1131,6 +1131,26 @@ static struct clk_branch gcc_ddrss_ecpri_dma_clk = {
>>   	},
>>   };
>>   
>> +static struct clk_branch gcc_ddrss_ecpri_gsi_clk = {
>> +	.halt_reg = 0x54298,
>> +	.halt_check = BRANCH_HALT_VOTED,
>> +	.hwcg_reg = 0x54298,
>> +	.hwcg_bit = 1,
>> +	.clkr = {
>> +		.enable_reg = 0x54298,
>> +		.enable_mask = BIT(0),
>> +		.hw.init = &(const struct clk_init_data) {
>> +			.name = "gcc_ddrss_ecpri_gsi_clk",
>> +			.parent_hws = (const struct clk_hw*[]) {
>> +				&gcc_aggre_noc_ecpri_gsi_clk_src.clkr.hw,
>> +			},
>> +			.num_parents = 1,
>> +			.flags = CLK_SET_RATE_PARENT,
>> +			.ops = &clk_branch2_aon_ops,
>> +		},
>> +	},
>> +};
>> +
>>   static struct clk_branch gcc_ecpri_ahb_clk = {
>>   	.halt_reg = 0x3a008,
>>   	.halt_check = BRANCH_HALT_VOTED,
>> @@ -1447,14 +1467,13 @@ static struct clk_branch gcc_pcie_0_cfg_ahb_clk = {
>>   
>>   static struct clk_branch gcc_pcie_0_clkref_en = {
>>   	.halt_reg = 0x9c004,
>> -	.halt_bit = 31,
>> -	.halt_check = BRANCH_HALT_ENABLE,
>> +	.halt_check = BRANCH_HALT,
>>   	.clkr = {
>>   		.enable_reg = 0x9c004,
>>   		.enable_mask = BIT(0),
>>   		.hw.init = &(const struct clk_init_data) {
>>   			.name = "gcc_pcie_0_clkref_en",
>> -			.ops = &clk_branch_ops,
>> +			.ops = &clk_branch2_ops,
> This sounds like a separate fix, clk_branch_ops seems to only concern
> 10+yo chips.
> 
> Konrad

Sure, will split this patch and push the next series.

Thanks,
Imran

>>   		},
>>   	},
>>   };
>> @@ -2274,14 +2293,13 @@ static struct clk_branch gcc_tsc_etu_clk = {
>>   
>>   static struct clk_branch gcc_usb2_clkref_en = {
>>   	.halt_reg = 0x9c008,
>> -	.halt_bit = 31,
>> -	.halt_check = BRANCH_HALT_ENABLE,
>> +	.halt_check = BRANCH_HALT,
>>   	.clkr = {
>>   		.enable_reg = 0x9c008,
>>   		.enable_mask = BIT(0),
>>   		.hw.init = &(const struct clk_init_data) {
>>   			.name = "gcc_usb2_clkref_en",
>> -			.ops = &clk_branch_ops,
>> +			.ops = &clk_branch2_ops,
>>   		},
>>   	},
>>   };
>> @@ -2523,6 +2541,8 @@ static struct clk_regmap *gcc_qdu1000_clocks[] = {
>>   	[GCC_AGGRE_NOC_ECPRI_GSI_CLK] = &gcc_aggre_noc_ecpri_gsi_clk.clkr,
>>   	[GCC_PCIE_0_PHY_AUX_CLK_SRC] = &gcc_pcie_0_phy_aux_clk_src.clkr,
>>   	[GCC_PCIE_0_PIPE_CLK_SRC] = &gcc_pcie_0_pipe_clk_src.clkr,
>> +	[GCC_GPLL1_OUT_EVEN] = &gcc_gpll1_out_even.clkr,
>> +	[GCC_DDRSS_ECPRI_GSI_CLK] = &gcc_ddrss_ecpri_gsi_clk.clkr,
>>   };
>>   
>>   static const struct qcom_reset_map gcc_qdu1000_resets[] = {
Konrad Dybcio July 6, 2023, 10:59 a.m. UTC | #3 
On 6.07.2023 12:51, Imran Shaik wrote:
> 
> 
> On 6/28/2023 4:36 PM, Konrad Dybcio wrote:
>> On 28.06.2023 11:28, Imran Shaik wrote:
>>> Add support for gcc_ddrss_ecpri_gsi_clk and update the GCC clkref clocks
>>> as per the latest hardware version of QDU1000 and QRU100 SoCs.
>>>
>>> Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
>>> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
>>> Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
>>> ---
[...]

>>>           .enable_reg = 0x9c004,
>>>           .enable_mask = BIT(0),
>>>           .hw.init = &(const struct clk_init_data) {
>>>               .name = "gcc_pcie_0_clkref_en",
>>> -            .ops = &clk_branch_ops,
>>> +            .ops = &clk_branch2_ops,
>> This sounds like a separate fix, clk_branch_ops seems to only concern
>> 10+yo chips.
>>
>> Konrad
> 
> Sure, will split this patch and push the next series.
One more nit, I noticed that a lot of QUIC folks respond to the comments
to their revision-N and send revision-(N+1) like 5 seconds later..

This maybe does not concern this message, as all you did is said "ok willfix",
but if you have some sort of a company-wide "upstream best practices" board,
you may add something like "wait a bit to let others respond to your email"

Konrad

> 
> Thanks,
> Imran
> 
>>>           },
>>>       },
>>>   };
>>> @@ -2274,14 +2293,13 @@ static struct clk_branch gcc_tsc_etu_clk = {
>>>     static struct clk_branch gcc_usb2_clkref_en = {
>>>       .halt_reg = 0x9c008,
>>> -    .halt_bit = 31,
>>> -    .halt_check = BRANCH_HALT_ENABLE,
>>> +    .halt_check = BRANCH_HALT,
>>>       .clkr = {
>>>           .enable_reg = 0x9c008,
>>>           .enable_mask = BIT(0),
>>>           .hw.init = &(const struct clk_init_data) {
>>>               .name = "gcc_usb2_clkref_en",
>>> -            .ops = &clk_branch_ops,
>>> +            .ops = &clk_branch2_ops,
>>>           },
>>>       },
>>>   };
>>> @@ -2523,6 +2541,8 @@ static struct clk_regmap *gcc_qdu1000_clocks[] = {
>>>       [GCC_AGGRE_NOC_ECPRI_GSI_CLK] = &gcc_aggre_noc_ecpri_gsi_clk.clkr,
>>>       [GCC_PCIE_0_PHY_AUX_CLK_SRC] = &gcc_pcie_0_phy_aux_clk_src.clkr,
>>>       [GCC_PCIE_0_PIPE_CLK_SRC] = &gcc_pcie_0_pipe_clk_src.clkr,
>>> +    [GCC_GPLL1_OUT_EVEN] = &gcc_gpll1_out_even.clkr,
>>> +    [GCC_DDRSS_ECPRI_GSI_CLK] = &gcc_ddrss_ecpri_gsi_clk.clkr,
>>>   };
>>>     static const struct qcom_reset_map gcc_qdu1000_resets[] = {
diff mbox series

Patch

diff --git a/drivers/clk/qcom/gcc-qdu1000.c b/drivers/clk/qcom/gcc-qdu1000.c
index c00d26a3e6df..991fb2bc97e9 100644
--- a/drivers/clk/qcom/gcc-qdu1000.c
+++ b/drivers/clk/qcom/gcc-qdu1000.c
@@ -1131,6 +1131,26 @@  static struct clk_branch gcc_ddrss_ecpri_dma_clk = {
 	},
 };
 
+static struct clk_branch gcc_ddrss_ecpri_gsi_clk = {
+	.halt_reg = 0x54298,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x54298,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x54298,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "gcc_ddrss_ecpri_gsi_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&gcc_aggre_noc_ecpri_gsi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_aon_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_ecpri_ahb_clk = {
 	.halt_reg = 0x3a008,
 	.halt_check = BRANCH_HALT_VOTED,
@@ -1447,14 +1467,13 @@  static struct clk_branch gcc_pcie_0_cfg_ahb_clk = {
 
 static struct clk_branch gcc_pcie_0_clkref_en = {
 	.halt_reg = 0x9c004,
-	.halt_bit = 31,
-	.halt_check = BRANCH_HALT_ENABLE,
+	.halt_check = BRANCH_HALT,
 	.clkr = {
 		.enable_reg = 0x9c004,
 		.enable_mask = BIT(0),
 		.hw.init = &(const struct clk_init_data) {
 			.name = "gcc_pcie_0_clkref_en",
-			.ops = &clk_branch_ops,
+			.ops = &clk_branch2_ops,
 		},
 	},
 };
@@ -2274,14 +2293,13 @@  static struct clk_branch gcc_tsc_etu_clk = {
 
 static struct clk_branch gcc_usb2_clkref_en = {
 	.halt_reg = 0x9c008,
-	.halt_bit = 31,
-	.halt_check = BRANCH_HALT_ENABLE,
+	.halt_check = BRANCH_HALT,
 	.clkr = {
 		.enable_reg = 0x9c008,
 		.enable_mask = BIT(0),
 		.hw.init = &(const struct clk_init_data) {
 			.name = "gcc_usb2_clkref_en",
-			.ops = &clk_branch_ops,
+			.ops = &clk_branch2_ops,
 		},
 	},
 };
@@ -2523,6 +2541,8 @@  static struct clk_regmap *gcc_qdu1000_clocks[] = {
 	[GCC_AGGRE_NOC_ECPRI_GSI_CLK] = &gcc_aggre_noc_ecpri_gsi_clk.clkr,
 	[GCC_PCIE_0_PHY_AUX_CLK_SRC] = &gcc_pcie_0_phy_aux_clk_src.clkr,
 	[GCC_PCIE_0_PIPE_CLK_SRC] = &gcc_pcie_0_pipe_clk_src.clkr,
+	[GCC_GPLL1_OUT_EVEN] = &gcc_gpll1_out_even.clkr,
+	[GCC_DDRSS_ECPRI_GSI_CLK] = &gcc_ddrss_ecpri_gsi_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_qdu1000_resets[] = {