Message ID | 20230728011218.14630-1-parellan@quicinc.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | drm/panel: Enable DSC and CMD mode for Visionox VTDR6130 panel | expand |
Please resend under the correct email. Thanks, Jessica Zhang On 7/27/2023 6:12 PM, parellan wrote: > From: Paloma Arellano <quic_parellan@quicinc.com> > > Enable display compression (DSC v1.2) and CMD mode for 1080x2400 Visionox > VTDR6130 AMOLED DSI panel. In addition, this patch will set the default > to command mode with DSC enabled. > > Note: This patch has only been validated DSC over command mode as DSC over > video mode has never been validated for the MSM driver before. > > Depends on: "Add prepare_prev_first flag to Visionox VTDR6130" [1] > > [1] https://patchwork.freedesktop.org/series/121337/ > > Suggested-by: Jessica Zhang <quic_jesszhan@quicinc.com> > Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> > --- > .../gpu/drm/panel/panel-visionox-vtdr6130.c | 77 ++++++++++++++++++- > 1 file changed, 73 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c > index e1363e128e7e..5658d39a3a6b 100644 > --- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c > +++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c > @@ -9,6 +9,7 @@ > #include <linux/of.h> > > #include <drm/display/drm_dsc.h> > +#include <drm/display/drm_dsc_helper.h> > #include <drm/drm_mipi_dsi.h> > #include <drm/drm_modes.h> > #include <drm/drm_panel.h> > @@ -20,7 +21,8 @@ struct visionox_vtdr6130 { > struct mipi_dsi_device *dsi; > struct gpio_desc *reset_gpio; > struct regulator_bulk_data supplies[3]; > - bool prepared; > + bool prepared, enabled; > + bool video_mode; > }; > > static inline struct visionox_vtdr6130 *to_visionox_vtdr6130(struct drm_panel *panel) > @@ -50,12 +52,18 @@ static int visionox_vtdr6130_on(struct visionox_vtdr6130 *ctx) > if (ret) > return ret; > > + mipi_dsi_dcs_write_seq(dsi, 0x03, 0x01); > mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20); > mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, 0x00, 0x00); > mipi_dsi_dcs_write_seq(dsi, 0x59, 0x09); > mipi_dsi_dcs_write_seq(dsi, 0x6c, 0x01); > mipi_dsi_dcs_write_seq(dsi, 0x6d, 0x00); > - mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x01); > + > + if (ctx->video_mode) > + mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x01); > + else > + mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x02); > + > mipi_dsi_dcs_write_seq(dsi, 0x70, > 0x12, 0x00, 0x00, 0xab, 0x30, 0x80, 0x09, 0x60, 0x04, > 0x38, 0x00, 0x28, 0x02, 0x1c, 0x02, 0x1c, 0x02, 0x00, > @@ -214,6 +222,42 @@ static const struct drm_display_mode visionox_vtdr6130_mode = { > .height_mm = 157, > }; > > +static int visionox_vtdr6130_enable(struct drm_panel *panel) > +{ > + struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel); > + struct mipi_dsi_device *dsi = ctx->dsi; > + struct drm_dsc_picture_parameter_set pps; > + int ret; > + > + if (ctx->enabled) > + return 0; > + > + if (!dsi->dsc) { > + dev_err(&dsi->dev, "DSC not attached to DSI\n"); > + return -ENODEV; > + } > + > + drm_dsc_pps_payload_pack(&pps, dsi->dsc); > + ret = mipi_dsi_picture_parameter_set(dsi, &pps); > + if (ret) { > + dev_err(&dsi->dev, "Failed to set PPS\n"); > + return ret; > + } > + > + ctx->enabled = true; > + > + return 0; > +} > + > +static int visionox_vtdr6130_disable(struct drm_panel *panel) > +{ > + struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel); > + > + ctx->enabled = false; > + > + return 0; > +} > + > static int visionox_vtdr6130_get_modes(struct drm_panel *panel, > struct drm_connector *connector) > { > @@ -237,6 +281,8 @@ static const struct drm_panel_funcs visionox_vtdr6130_panel_funcs = { > .prepare = visionox_vtdr6130_prepare, > .unprepare = visionox_vtdr6130_unprepare, > .get_modes = visionox_vtdr6130_get_modes, > + .enable = visionox_vtdr6130_enable, > + .disable = visionox_vtdr6130_disable, > }; > > static int visionox_vtdr6130_bl_update_status(struct backlight_device *bl) > @@ -269,11 +315,31 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi) > { > struct device *dev = &dsi->dev; > struct visionox_vtdr6130 *ctx; > + struct drm_dsc_config *dsc; > int ret; > > ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); > if (!ctx) > return -ENOMEM; > + > + ctx->video_mode = of_property_read_bool(dev->of_node, "enforce-video-mode"); > + > + dsc = devm_kzalloc(dev, sizeof(*dsc), GFP_KERNEL); > + if (!dsc) > + return -ENOMEM; > + > + /* Set DSC params */ > + dsc->dsc_version_major = 0x1; > + dsc->dsc_version_minor = 0x2; > + > + dsc->slice_height = 40; > + dsc->slice_width = 540; > + dsc->slice_count = 2; > + dsc->bits_per_component = 8; > + dsc->bits_per_pixel = 8 << 4; > + dsc->block_pred_enable = true; > + > + dsi->dsc = dsc; > > ctx->supplies[0].supply = "vddio"; > ctx->supplies[1].supply = "vci"; > @@ -294,8 +360,11 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi) > > dsi->lanes = 4; > dsi->format = MIPI_DSI_FMT_RGB888; > - dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET | > - MIPI_DSI_CLOCK_NON_CONTINUOUS; > + > + dsi->mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_CLOCK_NON_CONTINUOUS; > + if (ctx->video_mode) > + dsi->mode_flags |= MIPI_DSI_MODE_VIDEO; > + > ctx->panel.prepare_prev_first = true; > > drm_panel_init(&ctx->panel, dev, &visionox_vtdr6130_panel_funcs, > -- > 2.41.0 >
diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c index e1363e128e7e..5658d39a3a6b 100644 --- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c +++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c @@ -9,6 +9,7 @@ #include <linux/of.h> #include <drm/display/drm_dsc.h> +#include <drm/display/drm_dsc_helper.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_modes.h> #include <drm/drm_panel.h> @@ -20,7 +21,8 @@ struct visionox_vtdr6130 { struct mipi_dsi_device *dsi; struct gpio_desc *reset_gpio; struct regulator_bulk_data supplies[3]; - bool prepared; + bool prepared, enabled; + bool video_mode; }; static inline struct visionox_vtdr6130 *to_visionox_vtdr6130(struct drm_panel *panel) @@ -50,12 +52,18 @@ static int visionox_vtdr6130_on(struct visionox_vtdr6130 *ctx) if (ret) return ret; + mipi_dsi_dcs_write_seq(dsi, 0x03, 0x01); mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20); mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, 0x00, 0x00); mipi_dsi_dcs_write_seq(dsi, 0x59, 0x09); mipi_dsi_dcs_write_seq(dsi, 0x6c, 0x01); mipi_dsi_dcs_write_seq(dsi, 0x6d, 0x00); - mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x01); + + if (ctx->video_mode) + mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x01); + else + mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x02); + mipi_dsi_dcs_write_seq(dsi, 0x70, 0x12, 0x00, 0x00, 0xab, 0x30, 0x80, 0x09, 0x60, 0x04, 0x38, 0x00, 0x28, 0x02, 0x1c, 0x02, 0x1c, 0x02, 0x00, @@ -214,6 +222,42 @@ static const struct drm_display_mode visionox_vtdr6130_mode = { .height_mm = 157, }; +static int visionox_vtdr6130_enable(struct drm_panel *panel) +{ + struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel); + struct mipi_dsi_device *dsi = ctx->dsi; + struct drm_dsc_picture_parameter_set pps; + int ret; + + if (ctx->enabled) + return 0; + + if (!dsi->dsc) { + dev_err(&dsi->dev, "DSC not attached to DSI\n"); + return -ENODEV; + } + + drm_dsc_pps_payload_pack(&pps, dsi->dsc); + ret = mipi_dsi_picture_parameter_set(dsi, &pps); + if (ret) { + dev_err(&dsi->dev, "Failed to set PPS\n"); + return ret; + } + + ctx->enabled = true; + + return 0; +} + +static int visionox_vtdr6130_disable(struct drm_panel *panel) +{ + struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel); + + ctx->enabled = false; + + return 0; +} + static int visionox_vtdr6130_get_modes(struct drm_panel *panel, struct drm_connector *connector) { @@ -237,6 +281,8 @@ static const struct drm_panel_funcs visionox_vtdr6130_panel_funcs = { .prepare = visionox_vtdr6130_prepare, .unprepare = visionox_vtdr6130_unprepare, .get_modes = visionox_vtdr6130_get_modes, + .enable = visionox_vtdr6130_enable, + .disable = visionox_vtdr6130_disable, }; static int visionox_vtdr6130_bl_update_status(struct backlight_device *bl) @@ -269,11 +315,31 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi) { struct device *dev = &dsi->dev; struct visionox_vtdr6130 *ctx; + struct drm_dsc_config *dsc; int ret; ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; + + ctx->video_mode = of_property_read_bool(dev->of_node, "enforce-video-mode"); + + dsc = devm_kzalloc(dev, sizeof(*dsc), GFP_KERNEL); + if (!dsc) + return -ENOMEM; + + /* Set DSC params */ + dsc->dsc_version_major = 0x1; + dsc->dsc_version_minor = 0x2; + + dsc->slice_height = 40; + dsc->slice_width = 540; + dsc->slice_count = 2; + dsc->bits_per_component = 8; + dsc->bits_per_pixel = 8 << 4; + dsc->block_pred_enable = true; + + dsi->dsc = dsc; ctx->supplies[0].supply = "vddio"; ctx->supplies[1].supply = "vci"; @@ -294,8 +360,11 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi) dsi->lanes = 4; dsi->format = MIPI_DSI_FMT_RGB888; - dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET | - MIPI_DSI_CLOCK_NON_CONTINUOUS; + + dsi->mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_CLOCK_NON_CONTINUOUS; + if (ctx->video_mode) + dsi->mode_flags |= MIPI_DSI_MODE_VIDEO; + ctx->panel.prepare_prev_first = true; drm_panel_init(&ctx->panel, dev, &visionox_vtdr6130_panel_funcs,