| Message ID | 20230731053712.2220898-3-quic_fenglinw@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for vibrator in multiple PMICs | expand |
On Mon, 31 Jul 2023 13:37:07 +0800, Fenglin Wu wrote: > Add compatible string 'qcom,spmi-vib-gen2' to support vibrator module > inside PMI632, PMI7250B, PM7325B, PM7550BA. > > Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> > --- > .../bindings/input/qcom,pm8xxx-vib.yaml | 16 ++++++++++++---- > 1 file changed, 12 insertions(+), 4 deletions(-) > Acked-by: Rob Herring <robh@kernel.org>
On 31/07/2023 07:37, Fenglin Wu wrote: > Add compatible string 'qcom,spmi-vib-gen2' to support vibrator module > inside PMI632, PMI7250B, PM7325B, PM7550BA. > > Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> > --- > .../bindings/input/qcom,pm8xxx-vib.yaml | 16 ++++++++++++---- > 1 file changed, 12 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml > index c8832cd0d7da..4a2319fc1e3f 100644 > --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml > +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml > @@ -11,10 +11,18 @@ maintainers: > > properties: > compatible: > - enum: > - - qcom,pm8058-vib > - - qcom,pm8916-vib > - - qcom,pm8921-vib > + oneOf: > + - enum: > + - qcom,pm8058-vib > + - qcom,pm8916-vib > + - qcom,pm8921-vib > + - items: > + - enum: > + - qcom,pmi632-vib > + - qcom,pm7250b-vib > + - qcom,pm7325b-vib > + - qcom,pm7550b-vib > + - const: qcom,spmi-vib-gen2 This does not seem to implement my comment: "Entirely remove qcom,spmi-vib-gen2 and qcom,spmi-vib-gen1. Use device specific compatibles names only. As fallback and as first compatible." It's nice to respond that you disagree with it. Therefore, I am not going to Ack it. Best regards, Krzysztof
On 8/14/2023 6:06 PM, Krzysztof Kozlowski wrote: > On 31/07/2023 07:37, Fenglin Wu wrote: >> Add compatible string 'qcom,spmi-vib-gen2' to support vibrator module >> inside PMI632, PMI7250B, PM7325B, PM7550BA. >> >> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> >> --- >> .../bindings/input/qcom,pm8xxx-vib.yaml | 16 ++++++++++++---- >> 1 file changed, 12 insertions(+), 4 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml >> index c8832cd0d7da..4a2319fc1e3f 100644 >> --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml >> +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml >> @@ -11,10 +11,18 @@ maintainers: >> >> properties: >> compatible: >> - enum: >> - - qcom,pm8058-vib >> - - qcom,pm8916-vib >> - - qcom,pm8921-vib >> + oneOf: >> + - enum: >> + - qcom,pm8058-vib >> + - qcom,pm8916-vib >> + - qcom,pm8921-vib >> + - items: >> + - enum: >> + - qcom,pmi632-vib >> + - qcom,pm7250b-vib >> + - qcom,pm7325b-vib >> + - qcom,pm7550b-vib >> + - const: qcom,spmi-vib-gen2 > > This does not seem to implement my comment: > > "Entirely remove qcom,spmi-vib-gen2 and > qcom,spmi-vib-gen1. > > Use device specific compatibles names only. As fallback and as first > compatible." > > It's nice to respond that you disagree with it. Therefore, I am not > going to Ack it. I saw your comments and I replied your later comments in v2: https://lore.kernel.org/linux-arm-msm/b5e58172-beb5-0be3-834f-3f1db3e8b3b3@quicinc.com/. It might not be a good place to follow the discussion though, I am pasting my last reply below: 'Sorry, I forgot to mention, in v3, I added the 'reg' value to the register offset and no longer hard code the 16-bit register address, that makes the vibrators inside PMI632/PM7250B/PM7325B/PM7550BA all compatible, and that was another motivation of adding a generic compatible string and make the others as the fallback. This will be still the case in v4, I might keep it similar in v3 but just drop "qcom,spmi-vib-gen1" ' Anyway, if this is still not a good reason to add a generic compatible string, I can revert it back to use device specific compatible string only in next patch. Thanks > > Best regards, > Krzysztof >
On 15/08/2023 04:20, Fenglin Wu wrote: > > > On 8/14/2023 6:06 PM, Krzysztof Kozlowski wrote: >> On 31/07/2023 07:37, Fenglin Wu wrote: >>> Add compatible string 'qcom,spmi-vib-gen2' to support vibrator module >>> inside PMI632, PMI7250B, PM7325B, PM7550BA. >>> >>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> >>> --- >>> .../bindings/input/qcom,pm8xxx-vib.yaml | 16 ++++++++++++---- >>> 1 file changed, 12 insertions(+), 4 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml >>> index c8832cd0d7da..4a2319fc1e3f 100644 >>> --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml >>> +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml >>> @@ -11,10 +11,18 @@ maintainers: >>> >>> properties: >>> compatible: >>> - enum: >>> - - qcom,pm8058-vib >>> - - qcom,pm8916-vib >>> - - qcom,pm8921-vib >>> + oneOf: >>> + - enum: >>> + - qcom,pm8058-vib >>> + - qcom,pm8916-vib >>> + - qcom,pm8921-vib >>> + - items: >>> + - enum: >>> + - qcom,pmi632-vib >>> + - qcom,pm7250b-vib >>> + - qcom,pm7325b-vib >>> + - qcom,pm7550b-vib >>> + - const: qcom,spmi-vib-gen2 >> >> This does not seem to implement my comment: >> >> "Entirely remove qcom,spmi-vib-gen2 and >> qcom,spmi-vib-gen1. >> >> Use device specific compatibles names only. As fallback and as first >> compatible." >> >> It's nice to respond that you disagree with it. Therefore, I am not >> going to Ack it. > > I saw your comments and I replied your later comments in v2: > https://lore.kernel.org/linux-arm-msm/b5e58172-beb5-0be3-834f-3f1db3e8b3b3@quicinc.com/. > It might not be a good place to follow the discussion though, I am > pasting my last reply below: > > 'Sorry, I forgot to mention, in v3, I added the 'reg' value to the > register offset and no longer hard code the 16-bit register address, > that makes the vibrators inside PMI632/PM7250B/PM7325B/PM7550BA all > compatible, and that was another motivation of adding a generic > compatible string and make the others as the fallback. > > This will be still the case in v4, I might keep it similar in v3 but > just drop "qcom,spmi-vib-gen1" ' > > Anyway, if this is still not a good reason to add a generic compatible > string, I can revert it back to use device specific compatible string > only in next patch. I just don't see how this argument is anyhow related to what I said. I did not comment on removing the fallback. I said use specific compatible as fallback. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml index c8832cd0d7da..4a2319fc1e3f 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml @@ -11,10 +11,18 @@ maintainers: properties: compatible: - enum: - - qcom,pm8058-vib - - qcom,pm8916-vib - - qcom,pm8921-vib + oneOf: + - enum: + - qcom,pm8058-vib + - qcom,pm8916-vib + - qcom,pm8921-vib + - items: + - enum: + - qcom,pmi632-vib + - qcom,pm7250b-vib + - qcom,pm7325b-vib + - qcom,pm7550b-vib + - const: qcom,spmi-vib-gen2 reg: maxItems: 1
Add compatible string 'qcom,spmi-vib-gen2' to support vibrator module inside PMI632, PMI7250B, PM7325B, PM7550BA. Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> --- .../bindings/input/qcom,pm8xxx-vib.yaml | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)