diff mbox series

[v2] ARM: dts: qcom: ipq4019: correct SDHCI XO clock

Message ID 20230811110150.229966-1-robert.marko@sartura.hr (mailing list archive)
State Accepted
Commit b5ed7a5c1fdb3981713f7b637b72aa390c3db036
Headers show
Series [v2] ARM: dts: qcom: ipq4019: correct SDHCI XO clock | expand

Commit Message

Robert Marko Aug. 11, 2023, 11:01 a.m. UTC
Using GCC_DCD_XO_CLK as the XO clock for SDHCI controller is not correct,
it seems that I somehow made a mistake of passing it instead of the fixed
XO clock.

Fixes: 04b3b72b5b8f ("ARM: dts: qcom: ipq4019: Add SDHCI controller node")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
Changes in v2:
* Make clocks and clock-names one-per-line
---
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

Comments

Konrad Dybcio Aug. 11, 2023, 11:48 a.m. UTC | #1
On 11.08.2023 13:01, Robert Marko wrote:
> Using GCC_DCD_XO_CLK as the XO clock for SDHCI controller is not correct,
> it seems that I somehow made a mistake of passing it instead of the fixed
> XO clock.
> 
> Fixes: 04b3b72b5b8f ("ARM: dts: qcom: ipq4019: Add SDHCI controller node")
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> ---
Thanks!

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Bjorn Andersson Aug. 14, 2023, 2:02 a.m. UTC | #2
On Fri, 11 Aug 2023 13:01:16 +0200, Robert Marko wrote:
> Using GCC_DCD_XO_CLK as the XO clock for SDHCI controller is not correct,
> it seems that I somehow made a mistake of passing it instead of the fixed
> XO clock.
> 
> 

Applied, thanks!

[1/1] ARM: dts: qcom: ipq4019: correct SDHCI XO clock
      commit: b5ed7a5c1fdb3981713f7b637b72aa390c3db036

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 5492aeed14a5..80c04915f0e8 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -231,9 +231,12 @@  sdhci: mmc@7824900 {
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			bus-width = <8>;
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_DCD_XO_CLK>;
-			clock-names = "iface", "core", "xo";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
 			status = "disabled";
 		};