| Message ID | 20230906-topic-rb1_features_sans_icc-v1-3-e92ce6fbde16@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | RB1 features | expand |
On 06/09/2023 12:24, Konrad Dybcio wrote: > Enable the ADSP, MPSS and Wi-Fi. Tighten up the Wi-Fi regulators to > make them compliant with that the chip expects. > > The Wi-Fi reports: > qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000 > > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 0f7c59187896..5f7619518deb 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -134,6 +134,16 @@ &qupv3_id_0 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qcm2290/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm2290/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators { compatible = "qcom,rpm-pm2250-regulators"; @@ -373,6 +383,14 @@ &usb_hsphy { status = "okay"; }; +&wifi { + vdd-0.8-cx-mx-supply = <&pm2250_l7>; + vdd-1.8-xo-supply = <&pm2250_l13>; + vdd-1.3-rfa-supply = <&pm2250_l10>; + vdd-3.3-ch0-supply = <&pm2250_l22>; + status = "okay"; +}; + &xo_board { clock-frequency = <38400000>; };
Enable the ADSP, MPSS and Wi-Fi. Tighten up the Wi-Fi regulators to make them compliant with that the chip expects. The Wi-Fi reports: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000 Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)