diff mbox series

[2/2] arm64: dts: qcom: apq8016-sbc-d3-camera: Convert to DT overlay

Message ID 20230922-apq8016-sbc-camera-dtso-v1-2-ce9451895ca1@gerhold.net (mailing list archive)
State Accepted
Commit ea689ec32bf0d885277d3f58450a85df5149c98b
Headers show
Series arm64: dts: qcom: apq8016-sbc-d3-camera: Convert to DT overlay | expand

Commit Message

Stephan Gerhold Sept. 22, 2023, 3:11 p.m. UTC
Follow the example of the recently added apq8016-sbc-usb-host.dtso and
convert apq8016-sbc-d3-camera-mezzanine.dts to a DT overlay that can be
applied on top of the apq8016-sbc.dtb. This makes it more clear that
this is not a special type of DB410c but just an addon board that can
be added on top.

Functionally there should not be any difference since
apq8016-sbc-d3-camera-mezzanine.dtb is still generated as before
(but now by applying the overlay on top of apq8016-sbc.dtb).

Since dtc does not know that there are default #address/size-cells in
msm8916.dtsi, repeat those in the overlay to avoid dtc warnings because
it expects the wrong amount of address/size-cells.

It would be nice to have a generic overlay for the D3 camera mezzanine
(that can be applied to all 96Boards) but that's much more complicated
than providing a board-specific DT overlay as intermediate step.

Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
NOTE: I haven't tried booting this (since I don't have the camera
mezzanine) but I compared the resulting apq8016-sbc-d3-camera-mezzanine.dtb
which seems to be equivalent to the old one (aside from phandle
numbering and ordering).

It wouldn't hurt if someone could try booting this to be sure. :-)
---
 arch/arm64/boot/dts/qcom/Makefile                            |  5 +++--
 ...ra-mezzanine.dts => apq8016-sbc-d3-camera-mezzanine.dtso} | 12 ++++++++++--
 2 files changed, 13 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d6cb840b7050..641d770662a1 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,10 +1,11 @@ 
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 
-apq8016-sbc-usb-host-dtbs	:= apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo
+apq8016-sbc-d3-camera-mezzanine-dtbs	:= apq8016-sbc.dtb apq8016-sbc-d3-camera-mezzanine.dtbo
+apq8016-sbc-usb-host-dtbs		:= apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo
 
-dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-usb-host.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-d3-camera-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-usb-host.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8039-t2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso
similarity index 89%
rename from arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts
rename to arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso
index f9cbf8c1d689..d739ece6b44f 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso
@@ -5,10 +5,12 @@ 
  */
 
 /dts-v1/;
+/plugin/;
 
-#include "apq8016-sbc.dts"
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/gpio/gpio.h>
 
-/ {
+&{/} {
 	camera_vdddo_1v8: regulator-camera-vdddo {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vdddo";
@@ -38,6 +40,9 @@  &camss {
 	status = "okay";
 
 	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		port@0 {
 			reg = <0>;
 			csiphy0_ep: endpoint {
@@ -53,6 +58,9 @@  &cci {
 };
 
 &cci_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	camera@3b {
 		compatible = "ovti,ov5640";
 		reg = <0x3b>;