diff mbox series

[v2,3/3] ARM: dts: qcom: msm8226: Add blsp1_i2c6 and blsp1_uart2

Message ID 20230922-msm8226-i2c6-v2-3-3fb55c47a084@z3ntu.xyz (mailing list archive)
State Accepted
Commit ba369b3b49eabef03e4452aea7abb10edee65340
Headers show
Series Add blsp1_i2c6 and blsp1_uart2 to MSM8226 SoC | expand

Commit Message

Luca Weiss Sept. 22, 2023, 4:55 p.m. UTC
Add more busses found on msm8226 SoC.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 33 ++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Comments

Dmitry Baryshkov Sept. 23, 2023, 7:25 p.m. UTC | #1
On Fri, 22 Sept 2023 at 19:56, Luca Weiss <luca@z3ntu.xyz> wrote:
>
> Add more busses found on msm8226 SoC.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 33 ++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 44f3f0127fd7..82e830e9d254 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -230,6 +230,17 @@  blsp1_uart1: serial@f991d000 {
 			status = "disabled";
 		};
 
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart3: serial@f991f000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991f000 0x1000>;
@@ -313,6 +324,21 @@  blsp1_i2c5: i2c@f9927000 {
 			#size-cells = <0>;
 		};
 
+		blsp1_i2c6: i2c@f9928000 {
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9928000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			pinctrl-0 = <&blsp1_i2c6_pins>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		cci: cci@fda0c000 {
 			compatible = "qcom,msm8226-cci";
 			#address-cells = <1>;
@@ -460,6 +486,13 @@  blsp1_i2c5_pins: blsp1-i2c5-state {
 				bias-disable;
 			};
 
+			blsp1_i2c6_pins: blsp1-i2c6-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			cci_default: cci-default-state {
 				pins = "gpio29", "gpio30";
 				function = "cci_i2c0";