diff mbox series

[V4,3/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board

Message ID 20230929131936.29421-4-quic_nitirawa@quicinc.com (mailing list archive)
State Changes Requested
Headers show
Series Add UFS host controller and Phy nodes for sc7280 | expand

Commit Message

Nitin Rawat Sept. 29, 2023, 1:19 p.m. UTC 
Add UFS host controller and PHY nodes for sc7280 IDP board.

Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--
2.17.1

Comments

Konrad Dybcio Sept. 29, 2023, 1:26 p.m. UTC | #1 
On 9/29/23 15:19, Nitin Rawat wrote:
> Add UFS host controller and PHY nodes for sc7280 IDP board.
> 
> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> Acked-by: Manivannan Sadhasivam <mani@kernel.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
I did not add these tags to this patch, drop them.

Konrad
Nitin Rawat Sept. 29, 2023, 2:22 p.m. UTC | #2 
On 9/29/2023 6:56 PM, Konrad Dybcio wrote:
> 
> 
> On 9/29/23 15:19, Nitin Rawat wrote:
>> Add UFS host controller and PHY nodes for sc7280 IDP board.
>>
>> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
>> Acked-by: Manivannan Sadhasivam <mani@kernel.org>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>> Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> I did not add these tags to this patch, drop them.

My Apologies.Actually Patch 2 and Patch3 review tag got swapped.
Will update and send new patchset
> 
> Konrad

Thanks,
Nitin
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2ff549f4dc7a..a0059527d9e4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -499,6 +499,25 @@ 
 	status = "okay";
 };

+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p9>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };