diff mbox series

arm64: dts: qcom: msm8953: add SPI interfaces

Message ID 20231013110137.82439-1-morf3089@gmail.com (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: msm8953: add SPI interfaces | expand

Commit Message

Gianluca Boiano Oct. 13, 2023, 11:01 a.m. UTC
From: Gianluca Boiano <morf3089@gmail.com>

This change add spi_3, spi_5 and spi_6 interfaces to
MSM8953 devices.

Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8953.dtsi | 102 ++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index e7de7632669a..cdfc38e562b6 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -726,6 +726,48 @@  i2c_8_sleep: i2c-8-sleep-state {
 				bias-disable;
 			};
 
+			spi_3_default: spi-3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_spi3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_3_sleep: spi-3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_default: spi-5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_spi5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_sleep: spi-5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_default: spi-6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_spi6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_sleep: spi-6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			wcnss_pin_a: wcnss-active-state {
 
 				wcss-wlan2-pins {
@@ -1360,6 +1402,26 @@  i2c_3: i2c@78b7000 {
 			status = "disabled";
 		};
 
+		spi_3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_3_default>;
+			pinctrl-1 = <&spi_3_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b8000 0x600>;
@@ -1413,6 +1475,26 @@  i2c_5: i2c@7af5000 {
 			status = "disabled";
 		};
 
+		spi_5: spi@7af5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_5_default>;
+			pinctrl-1 = <&spi_5_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_6: i2c@7af6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af6000 0x600>;
@@ -1433,6 +1515,26 @@  i2c_6: i2c@7af6000 {
 			status = "disabled";
 		};
 
+		spi_6: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_6_default>;
+			pinctrl-1 = <&spi_6_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_7: i2c@7af7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af7000 0x600>;