diff mbox series

[v2,6/6] arm64: dts: qcom: sm8350-lemonade(p): new devices

Message ID 20231018-nia-sm8350-for-upstream-v2-6-7b243126cb77@igalia.com (mailing list archive)
State Superseded
Headers show
Series support oneplus-lemonade(p) devices | expand

Commit Message

Nia Espera Oct. 18, 2023, 2:25 p.m. UTC
Device tree files for OnePlus 9 and 9 Pro. Details of supported features
mentioned in the cover letter for this patch series, but for
accessibility also repeated here:

- USB OTG
- UFS
- Framebuffer display
- Touchscreen (for lemonade)
- Power & volume down keys
- Battery reading
- Modem, IPA, and remoteproc bringup

Steps to get booting:

- Wipe dtbo partition
- Flash vbmeta with disabled verity bit
- Flash kernel and initfs to boot partition with CLI args pd_ignore_unused
and clk_ignore_unused as v1 bootimg
- Flash rootfs to some other partition (probably super or userdata)

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |    2 +
 .../arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi | 1042 ++++++++++++++++++++
 .../boot/dts/qcom/sm8350-oneplus-lemonade.dts      |   85 ++
 .../boot/dts/qcom/sm8350-oneplus-lemonadep.dts     |   20 +
 4 files changed, 1149 insertions(+)

Comments

Krzysztof Kozlowski Oct. 18, 2023, 2:34 p.m. UTC | #1
On 18/10/2023 16:25, Nia Espera wrote:
> Device tree files for OnePlus 9 and 9 Pro. Details of supported features
> mentioned in the cover letter for this patch series, but for
> accessibility also repeated here:
> 

...

> +	/* tp_rst_suspend pinctrl is different per device, don't specify here */
> +
> +	tp_irq_active: tp-irq-active-state {
> +		pins = "gpio23";
> +		function = "gpio";
> +		drive-strength = <8>;
> +		bias-disable;
> +		input-enable;

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

We shouldn't need to repeat the same comment twice.

Best regards,
Krzysztof
Nia Espera Oct. 18, 2023, 2:43 p.m. UTC | #2
On 10/18/23 16:34, Krzysztof Kozlowski wrote:
> On 18/10/2023 16:25, Nia Espera wrote:
>> Device tree files for OnePlus 9 and 9 Pro. Details of supported features
>> mentioned in the cover letter for this patch series, but for
>> accessibility also repeated here:
>>
> 
> ...
> 
>> +	/* tp_rst_suspend pinctrl is different per device, don't specify here */
>> +
>> +	tp_irq_active: tp-irq-active-state {
>> +		pins = "gpio23";
>> +		function = "gpio";
>> +		drive-strength = <8>;
>> +		bias-disable;
>> +		input-enable;
> 
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check W=1` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).

I noticed that dtbs_check was unhappy here, but I figured it's okay to 
ignore that since it didn't complain in other places (e.g. lines 
554-555) and assumed the error was just a bug in the yaml. Sorry!

> We shouldn't need to repeat the same comment twice.
> 
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Oct. 18, 2023, 2:59 p.m. UTC | #3
On 18/10/2023 16:43, Nia Espera wrote:
> 
> On 10/18/23 16:34, Krzysztof Kozlowski wrote:
>> On 18/10/2023 16:25, Nia Espera wrote:
>>> Device tree files for OnePlus 9 and 9 Pro. Details of supported features
>>> mentioned in the cover letter for this patch series, but for
>>> accessibility also repeated here:
>>>
>>
>> ...
>>
>>> +	/* tp_rst_suspend pinctrl is different per device, don't specify here */
>>> +
>>> +	tp_irq_active: tp-irq-active-state {
>>> +		pins = "gpio23";
>>> +		function = "gpio";
>>> +		drive-strength = <8>;
>>> +		bias-disable;
>>> +		input-enable;
>>
>> It does not look like you tested the DTS against bindings. Please run
>> `make dtbs_check W=1` (see
>> Documentation/devicetree/bindings/writing-schema.rst or
>> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
>> for instructions).
> 
> I noticed that dtbs_check was unhappy here, but I figured it's okay to 
> ignore that since it didn't complain in other places (e.g. lines 
> 554-555) and assumed the error was just a bug in the yaml. Sorry!

There are no other DTS having this property for TLMM, so you could not
have seen this in other boards.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2cca20563a1d..369ad4721b29 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -211,6 +211,8 @@  dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-csot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-oneplus-lemonade.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-oneplus-lemonadep.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx214.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx215.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
new file mode 100644
index 000000000000..4397b72931b3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
@@ -0,0 +1,1042 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ *	Nia Espera <nespera@igalia.com>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
+#define SMB139x_1_SID 0x0b
+#define SMB139x_2_SID 0x0c
+#include <dt-bindings/iio/qcom,spmi-adc7-smb139x.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	chassis-type = "handset";
+	interrupt-parent = <&intc>;
+
+	bat: battery {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		voltage-min-design-microvolt = <3200000>;
+		energy-full-design-microwatt-hours = <15840000>;
+		charge-full-design-microamp-hours = <2225000>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@e4d00000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xe4d00000 0 0x2400000>;
+			width = <1080>;
+			height = <2412>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's
+			 * necessary due to unused clk cleanup & no panel
+			 * driver yet.
+			 */
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>;
+		};
+	};
+
+	display_panel_avdd: display-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "display_panel_avdd";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_down_n>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pmk8350_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8350/lemonade/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&pm8350_s11>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&pm8350_s11>;
+		vdd-l8-supply = <&pmr735a_s2>;
+
+		/*
+		 * ARC regulators:
+		 * S5 - mx.lvl
+		 * S6 - gfx.lvl
+		 * S9 - mxc.lvl
+		 */
+
+		pm8350_s10: smps10 {
+			regulator-name = "pm8350_s10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s11: smps11 {
+			regulator-name = "pm8350_s11";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1012000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s12: smps12 {
+			regulator-name = "pm8350_s12";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l1: ldo1 {
+			regulator-name = "pm8350_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l2: ldo2 {
+			regulator-name = "pm8350_l2";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l3: ldo3 {
+			regulator-name = "pm8350_l3";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		pm8350_l5: ldo5 {
+			regulator-name = "pm8350_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l6: ldo6 {
+			regulator-name = "pm8350_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l7: ldo7 {
+			regulator-name = "pm8350_l7";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L8 - lcx.lvl (ARC) */
+
+		pm8350_l9: ldo9 {
+			regulator-name = "pm8350_l9";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&pm8350c_s1>;
+		vdd-l2-l8-supply = <&pm8350c_s1>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&pm8350_s12>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		pm8350c_s1: smps1 {
+			regulator-name = "pm8350c_s1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* S2 - ebi.lvl (ARC) */
+
+		pm8350c_s3: smps3 {
+			regulator-name = "pm8350c_s3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * ARC regulators:
+		 * S4 - mss.lvl
+		 * S6 - cx.lvl
+		 * S8 - mmcx.lvl
+		 */
+
+		pm8350c_s10: smps10 {
+			regulator-name = "pm8350c_s10";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l1: ldo1 {
+			regulator-name = "pm8350c_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l2: ldo2 {
+			regulator-name = "pm8350c_l2";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l3: ldo3 {
+			regulator-name = "pm8350c_l3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l4: ldo4 {
+			regulator-name = "pm8350c_l4";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l5: ldo5 {
+			regulator-name = "pm8350c_l5";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l6: ldo6 {
+			regulator-name = "pm8350c_l6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l7: ldo7 {
+			regulator-name = "pm8350c_l7";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l8: ldo8 {
+			regulator-name = "pm8350c_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l9: ldo9 {
+			regulator-name = "pm8350c_l9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l10: ldo10 {
+			regulator-name = "pm8350c_l10";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l11: ldo11 {
+			regulator-name = "pm8350c_l11";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l12: ldo12 {
+			regulator-name = "pm8350c_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l13: ldo13 {
+			regulator-name = "pm8350c_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3400000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+
+	/* pm8350b has one regulator here; unused for now */
+
+	regulators-2 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&pmr735a_s2>;
+		vdd-l3-supply = <&pmr735a_s1>;
+		vdd-l4-supply = <&pm8350c_s1>;
+		vdd-l5-l6-supply = <&pm8350c_s1>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		pmr735a_s1: smps1 {
+			regulator-name = "pmr735a_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1280000>;
+		};
+
+		pmr735a_s2: smps2 {
+			regulator-name = "pmr735a_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		pmr735a_s3: smps3 {
+			regulator-name = "pmr735a_s3";
+			regulator-min-microvolt = <2208000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		pmr735a_l1: ldo1 {
+			regulator-name = "pmr735a_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		pmr735a_l2: ldo2 {
+			regulator-name = "pmr735a_l2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l3: ldo3 {
+			regulator-name = "pmr735a_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: ldo4 {
+			regulator-name = "pmr735a_l4";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1872000>;
+		};
+
+		pmr735a_l5: ldo5 {
+			regulator-name = "pmr735a_l5";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pmr735a_l6: ldo6 {
+			regulator-name = "pmr735a_l6";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <904000>;
+		};
+
+		pmr735a_l7: ldo7 {
+			regulator-name = "pmr735a_l7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8350/lemonade/cdsp.mbn";
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	bq27541: fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+		monitored-battery = <&bat>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* Touchscreens: Syna TCM oncell or Samsung s6sy761 */
+};
+
+&i2c13 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	fsa4480@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+		mode-switch;
+		orientation-switch;
+	};
+
+	/* Qualcomm PM8008i/PM8008j @ 8, 9, c, d */
+};
+
+&i2c15 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* sn-nci NFC controller @ 28 */
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	firmware-name = "qcom/sm8350/lemonade/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mpss {
+	firmware-name = "qcom/sm8350/lemonade/modem.mbn";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&pm8350_l5>;
+	vdda-pll-supply = <&pm8350_l6>;
+
+	status = "okay";
+};
+
+&pm8350_gpios {
+	gpio1_adc_default: gpio1-adc-default-state {
+		pins = "gpio1";
+		function = "normal";
+		bias-high-impedance;
+		bias-disable;
+	};
+
+	gpio3_adc_default: gpio3-adc-default-state {
+		pins = "gpio3";
+		function = "normal";
+		bias-high-impedance;
+		bias-disable;
+	};
+};
+
+&pm8350_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	pm8350-msm-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350-cam-flash-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350-hot-pocket-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350-wide-rfc-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350-rear-tof-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350b-usb-conn-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm8350b-wl-chg-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_adc_default>, <&gpio3_adc_default>;
+
+	/* pmk8350-ref-gnd */
+	channel@0 {
+		reg = <0x00>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_ref_gnd";
+	};
+
+	/* pmk8350-vref-1p25 */
+	channel@1 {
+		reg = <0x01>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_vref_1p25";
+	};
+
+	/* pmk8350-die-temp */
+	channel@3 {
+		reg = <0x03>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_die_temp";
+	};
+
+	/* pm8350-ref-gnd */
+	channel@100 {
+		reg = <0x100>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_ref_gnd";
+	};
+
+	/*pm8350-vref-1p25*/
+	channel@101 {
+		reg = <0x101>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_vref_1p25";
+	};
+
+	/* pm8350-die-temp */
+	channel@103 {
+		reg = <0x103>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_die_temp";
+	};
+
+	/* pm8350-vph-pwr */
+	channel@18e {
+		reg = <0x18e>;
+		qcom,pre-scaling = <1 3>;
+		label = "pm8350_vph_pwr";
+	};
+
+	/* pm8350b-ref-gnd */
+	channel@300 {
+		reg = <0x300>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_ref_gnd";
+	};
+
+	/* pm8350b-vref-1p25 */
+	channel@301 {
+		reg = <0x301>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_vref_1p25";
+	};
+
+	/* pm8350b-die-temp */
+	channel@303 {
+		reg = <0x303>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_die_temp";
+	};
+
+	/* pm8350b-vph-pwr */
+	channel@38e {
+		reg = <0x38e>;
+		qcom,pre-scaling = <1 3>;
+		label = "pm8350b_vph_pwr";
+	};
+
+	/* pm8350b-vbat-sns */
+	channel@38f {
+		reg = <0x38f>;
+		qcom,pre-scaling = <1 3>;
+		label = "pm8350b_vbat_sns";
+	};
+
+	/* pm8350-msm-therm */
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_msm_therm";
+	};
+
+	/* pm8350-cam-flash-therm */
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_cam_flash_therm";
+	};
+
+	/* pm8350-hot-pocket-therm */
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_hot_pocket_therm";
+	};
+
+	/* pm8350-wide-rfc-therm */
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_wide_rfc_therm";
+	};
+
+	/* pm8350-rear-tof-therm */
+	channel@148 {
+		reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350_rear_tof_therm";
+	};
+
+	/* pm8350b-usb-conn-therm */
+	channel@347 {
+		reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_usb_conn_therm";
+	};
+
+	/* pm8350b-wl-chg-therm */
+	channel@34b {
+		reg = <PM8350B_ADC7_GPIO2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_wl_chg_therm";
+	};
+
+	/* pm8350b-chg-temp */
+	channel@310 {
+		reg = <PM8350B_ADC7_CHG_TEMP>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_chg_temp";
+	};
+
+	/* pmr735a-ref-gnd */
+	channel@400 {
+		reg = <0x400>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_ref_gnd";
+	};
+
+	/* pmr735a-vref-1p25 */
+	channel@401 {
+		reg = <0x401>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_vref_1p25";
+	};
+
+	/* pmr735a-die-temp */
+	channel@403 {
+		reg = <0x403>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_die_temp";
+	};
+
+	/* pmr735b-ref-gnd */
+	channel@500 {
+		reg = <0x500>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735b_ref_gnd";
+	};
+
+	/* pmr735b-vref-1p25 */
+	channel@501 {
+		reg = <0x501>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735b_vref_1p25";
+	};
+
+	/* pmr735b-die-temp */
+	channel@503 {
+		reg = <0x503>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735b_die_temp";
+	};
+
+	/* smb139x-1-smb-temp */
+	channel@b06 {
+		reg = <SMB139x_1_ADC7_SMB_TEMP>;
+		qcom,pre-scaling = <1 1>;
+		label = "smb139x_1_smb_temp";
+	};
+
+	/* smb139x-2-smb-temp */
+	channel@c06 {
+		reg = <SMB139x_2_ADC7_SMB_TEMP>;
+		qcom,pre-scaling = <1 1>;
+		label = "smb139x_2_smb_temp";
+	};
+
+	/* gpio1-v */
+	channel@128 {
+		reg = <0x128>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <0x2bc>;
+		qcom,pre-scaling = <1 1>;
+		label = "gpio1_v";
+	};
+
+	/* gpio3-v */
+	channel@12b {
+		reg = <0x12b>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <0x2bc>;
+		qcom,pre-scaling = <1 1>;
+		label = "gpio3_v";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&reserved_memory {
+	bootloader-log@9fff7000 {
+		reg = <0 0x9fff7000 0 0x8000>;
+	};
+
+	framebuffer@e1000000 {
+		reg = <0 0xe4d00000 0 0x02400000>;
+		no-map;
+	};
+
+	ramoops: ramoops@E9700000 {
+		compatible = "ramoops";
+		reg = <0 0xe9700000 0 0x05b8000>;
+		record-size = <0x40000>;
+		console-size = <0x40000>;
+		ftrace-size = <0x200000>;
+		pmsg-size = <0x200000>;
+		ecc-size = <0>;
+	};
+
+	reserved@ea700000 {
+		reg = <0 0xea700000 0 0x800000>;
+	};
+};
+
+&removed_mem {
+	reg = <0 0xd8800000 0 0x8e00000>;
+};
+
+&slpi {
+	firmware-name = "qcom/sm8350/lemonade/slpi.mbn";
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <52 8>;
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio94";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio95";
+			function = "pcie0_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio96";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		sleep-pins {
+			pins = "gpio95";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio97";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio98";
+			function = "pcie1_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			/* wil6210_refclk_en_pin lives here also */
+		};
+	};
+
+	/* Modem-related pin common on both devices */
+	rf_cable_ant0_active: rf-cable-ant0-active-state {
+		pins = "gpio165";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	tp_rst_active: tp-rst-active-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	/* tp_rst_suspend pinctrl is different per device, don't specify here */
+
+	tp_irq_active: tp-irq-active-state {
+		pins = "gpio23";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		input-enable;
+	};
+
+	tp_irq_suspend: tp-irq-suspend-state {
+		pins = "gpio23";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&pm8350_l7>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&pm8350_l9>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&pm8350_l5>;
+	vdda-max-microamp = <91600>;
+	vdda-pll-supply = <&pm8350_l6>;
+	vdda-pll-max-microamp = <19000>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	/*
+	 * Bug in interconnect driver breaks USB; RPMh is unable to power on
+	 * USB regulators without this.
+	 */
+	/delete-property/ interconnects;
+	/delete-property/ interconnect-names;
+
+	/* USB3 seems broken (though it's enabled downstream?) */
+	qcom,select-utmi-as-pipe-clk;
+
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Mode switching is untested */
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
new file mode 100644
index 000000000000..473f10d4fcf0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
@@ -0,0 +1,85 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ *	Nia Espera <nespera@igalia.com>
+ */
+
+/dts-v1/;
+
+#include "sm8350-oneplus-common.dtsi"
+
+/ {
+	compatible = "oneplus,lemonade", "qcom,sm8350";
+	model = "OnePlus 9";
+};
+
+&i2c4 {
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupts-extended = <&tlmm 23 IRQ_TYPE_LEVEL_LOW>;
+
+		avdd-supply = <&pm8350c_l13>;
+		vdd-supply = <&pm8350c_l8>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&tp_rst_active>, <&tp_irq_active>, <&tp_enable_2v8>;
+		pinctrl-1 = <&tp_rst_suspend>, <&tp_irq_suspend>;
+	};
+};
+
+&mpss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rf_cable_ant0_active>,
+		    <&rf_cable_ant1_active>,
+		    <&rf_cable_ant2_active>,
+		    <&rf_cable_ant3_active>,
+		    <&rf_cable_ant7_active>;
+};
+
+&tlmm {
+	/* Modem antenna pins exclusive to lemonade */
+	rf_cable_ant1_active: rf-cable-ant1-active-state {
+		pins = "gpio27";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	rf_cable_ant2_active: rf-cable-ant2-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	rf_cable_ant3_active: rf-cable-ant3-active-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	rf_cable_ant7_active: rf-cable-ant7-active-state {
+		pins = "gpio155";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	tp_rst_suspend: tp-rst-suspend-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	tp_enable_2v8: tp-enable-2v8-state {
+		pins = "gpio74";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
new file mode 100644
index 000000000000..bc7e5654bd3d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
@@ -0,0 +1,20 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ *	Nia Espera <nespera@igalia.com>
+ */
+
+/dts-v1/;
+
+#include "sm8350-oneplus-common.dtsi"
+
+/ {
+	compatible = "oneplus,lemonadep", "qcom,sm8350";
+	model = "OnePlus 9 Pro";
+};
+
+&mpss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rf_cable_ant0_active>;
+};