diff mbox series

[RFC,2/8] arm64: dts: qcom: add initial SM8650 dtsi

Message ID 20231025-topic-sm8650-upstream-dt-v1-2-a821712af62f@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: Introduce SM8650 platforms device tree | expand

Commit Message

Neil Armstrong Oct. 25, 2023, 7:47 a.m. UTC
Add initial DTSI for the Qualcomm SM8650 platform,
only contains nodes which doesn't depend on interconnect.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 2665 ++++++++++++++++++++++++++++++++++
 1 file changed, 2665 insertions(+)

Comments

Konrad Dybcio Oct. 25, 2023, 9:01 a.m. UTC | #1
On 10/25/23 09:47, Neil Armstrong wrote:
> Add initial DTSI for the Qualcomm SM8650 platform,
> only contains nodes which doesn't depend on interconnect.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---[...]

> +			CLUSTER_SLEEP_1: cluster-sleep-1 {
> +				compatible = "domain-idle-state";
> +				arm,psci-suspend-param = <0x4100c344>;
I think this parameter signals the AOSS to attempt system
suspend and CLUSTER_SLEEP is a shallower, separate state.

[...]
> +			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
> +					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
Is <CONTROL_TCS 0> the correct value?

I think it looks good otherwise

Konrad
Neil Armstrong Oct. 25, 2023, 11:55 a.m. UTC | #2
On 25/10/2023 11:01, Konrad Dybcio wrote:
> 
> 
> On 10/25/23 09:47, Neil Armstrong wrote:
>> Add initial DTSI for the Qualcomm SM8650 platform,
>> only contains nodes which doesn't depend on interconnect.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>> ---[...]
> 
>> +            CLUSTER_SLEEP_1: cluster-sleep-1 {
>> +                compatible = "domain-idle-state";
>> +                arm,psci-suspend-param = <0x4100c344>;
> I think this parameter signals the AOSS to attempt system
> suspend and CLUSTER_SLEEP is a shallower, separate state.

I have a doubt, I'll double check on this,

> 
> [...]
>> +            qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
>> +                      <WAKE_TCS      2>, <CONTROL_TCS   0>;
> Is <CONTROL_TCS 0> the correct value?

I assume it is, I'll double check.

Thanks,
Neil

> 
> I think it looks good otherwise
> 
> Konrad
Neil Armstrong Nov. 2, 2023, 10:54 a.m. UTC | #3
On 25/10/2023 11:01, Konrad Dybcio wrote:
> 
> 
> On 10/25/23 09:47, Neil Armstrong wrote:
>> Add initial DTSI for the Qualcomm SM8650 platform,
>> only contains nodes which doesn't depend on interconnect.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>> ---[...]
> 
>> +            CLUSTER_SLEEP_1: cluster-sleep-1 {
>> +                compatible = "domain-idle-state";
>> +                arm,psci-suspend-param = <0x4100c344>;
> I think this parameter signals the AOSS to attempt system
> suspend and CLUSTER_SLEEP is a shallower, separate state.

OK, so downstream call this state "APSS_OFF" and the other state
calling 0x41000044 "CLUSTER_PWR_DN"

On sm8[345]0 and qdu1000/sm4450 there's both states called CLUSTER_SLEEP_0 and CLUSTER_SLEEP_1,
and referenced into CLUSTER_PD cluster power domain.

I assume this is the same as SM8550, so what's the issue ?

> 
> [...]
>> +            qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
>> +                      <WAKE_TCS      2>, <CONTROL_TCS   0>;
> Is <CONTROL_TCS 0> the correct value?

Yes it's the right value.

> 
> I think it looks good otherwise
> 
> Konrad

Thanks,
Neil
Konrad Dybcio Nov. 2, 2023, 1:32 p.m. UTC | #4
On 02/11/2023 11:54, Neil Armstrong wrote:
> On 25/10/2023 11:01, Konrad Dybcio wrote:
>>
>>
>> On 10/25/23 09:47, Neil Armstrong wrote:
>>> Add initial DTSI for the Qualcomm SM8650 platform,
>>> only contains nodes which doesn't depend on interconnect.
>>>
>>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>>> ---[...]
>>
>>> +            CLUSTER_SLEEP_1: cluster-sleep-1 {
>>> +                compatible = "domain-idle-state";
>>> +                arm,psci-suspend-param = <0x4100c344>;
>> I think this parameter signals the AOSS to attempt system
>> suspend and CLUSTER_SLEEP is a shallower, separate state.
> 
> OK, so downstream call this state "APSS_OFF" and the other state
> calling 0x41000044 "CLUSTER_PWR_DN"Well, the name APSS_OFF suggests that all clusters go offline so
that would be a bit more complex than a simple "cut power to this
cluster"


> On sm8[345]0 and qdu1000/sm4450 there's both states called 
> CLUSTER_SLEEP_0 and CLUSTER_SLEEP_1,
> and referenced into CLUSTER_PD cluster power domain.
> 
> I assume this is the same as SM8550, so what's the issue ?
It's just that we've been naming it in the most generic way possible
and that it could be more descriptive, especially given its
correlation with different things

Konrad
Neil Armstrong Nov. 6, 2023, 8:22 a.m. UTC | #5
On 02/11/2023 14:32, Konrad Dybcio wrote:
> 
> 
> On 02/11/2023 11:54, Neil Armstrong wrote:
>> On 25/10/2023 11:01, Konrad Dybcio wrote:
>>>
>>>
>>> On 10/25/23 09:47, Neil Armstrong wrote:
>>>> Add initial DTSI for the Qualcomm SM8650 platform,
>>>> only contains nodes which doesn't depend on interconnect.
>>>>
>>>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>>>> ---[...]
>>>
>>>> +            CLUSTER_SLEEP_1: cluster-sleep-1 {
>>>> +                compatible = "domain-idle-state";
>>>> +                arm,psci-suspend-param = <0x4100c344>;
>>> I think this parameter signals the AOSS to attempt system
>>> suspend and CLUSTER_SLEEP is a shallower, separate state.
>>
>> OK, so downstream call this state "APSS_OFF" and the other state
>> calling 0x41000044 "CLUSTER_PWR_DN"Well, the name APSS_OFF suggests that all clusters go offline so
> that would be a bit more complex than a simple "cut power to this
> cluster"
> 
> 
>> On sm8[345]0 and qdu1000/sm4450 there's both states called CLUSTER_SLEEP_0 and CLUSTER_SLEEP_1,
>> and referenced into CLUSTER_PD cluster power domain.
>>
>> I assume this is the same as SM8550, so what's the issue ?
> It's just that we've been naming it in the most generic way possible
> and that it could be more descriptive, especially given its
> correlation with different things

Ack, will change the naming

Neil

> 
> Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
new file mode 100644
index 000000000000..bbebe15437aa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -0,0 +1,2665 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8650-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sm8650-gpucc.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0x100>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x200>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x300>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x400>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x500>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x600>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x4";
+			reg = <0 0x700>;
+
+			clocks = <&cpufreq_hw 2>;
+
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <588>;
+
+			qcom,freq-domain = <&cpufreq_hw 2>;
+
+			#cooling-cells = <2>;
+
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			SILVER_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <550>;
+				exit-latency-us = <750>;
+				min-residency-us = <6700>;
+				local-timer-stop;
+			};
+
+			GOLD_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-plus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8650", "qcom,scm";
+		};
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>,
+					     <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0 0x80000000 0 0xe00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm@80e00000 {
+			reg = <0 0x80e00000 0 0x400000>;
+			no-map;
+		};
+
+		/* Merged xbl_dtlog, xbl_ramdump and aop_image regions */
+		xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x81c60000 0 0x20000>;
+			no-map;
+		};
+
+		/* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
+			reg = <0 0x81c80000 0 0x74000>;
+			no-map;
+		};
+
+		/* Secdata region can be reused by apps */
+
+		smem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0 0x81d00000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi@81f00000 {
+			reg = <0 0x81f00000 0 0x20000>;
+			no-map;
+		};
+
+		pvmfw_mem: pvmfw@824a0000 {
+			reg = <0 0x824a0000 0 0x100000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@82800000 {
+			reg = <0 0x82800000 0 0x2000000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm@86b00000 {
+			reg = <0 0x86b00000 0 0x4900000>;
+			no-map;
+		};
+
+		mpss_dsm_mem_2: mpss-dsm-2@8b400000 {
+			reg = <0 0x8b400000 0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8bc00000 {
+			reg = <0 0x8bc00000 0 0xf400000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 {
+			reg = <0 0x9b000000 0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@9b080000 {
+			reg = <0 0x9b080000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@9b090000 {
+			reg = <0 0x9b090000 0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@9b09a000 {
+			reg = <0 0x9b09a000 0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss@9b0a0000 {
+			reg = <0 0x9b0a0000 0 0x1e0000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared@9b280000 {
+			reg = <0 0x9b280000 0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared@9b2e0000 {
+			reg = <0 0x9b2e0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera@9b300000 {
+			reg = <0 0x9b300000 0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@9bb00000 {
+			reg = <0 0x9bb00000 0 0x800000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@9c300000 {
+			reg = <0 0x9c300000 0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@9ca00000 {
+			reg = <0 0x9ca00000 0 0x1400000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 {
+			reg = <0 0x9de00000 0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 {
+			reg = <0 0x9de80000 0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@9df00000 {
+			reg = <0 0x9df00000 0 0x4080000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@d7c00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xd7c00000 0 0x400000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+
+		/* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */
+		tz_merged_mem: tz-merged@d8000000 {
+			reg = <0 0xd8000000 0 0x800000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf@e6440000 {
+			reg = <0 0xe6440000 0 0x2dd000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm@f3800000 {
+			reg = <0 0xf3800000 0 0x4400000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm@f7c00000 {
+			reg = <0 0xf7c00000 0 0x4c00000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0 0xff800000 0 0x600000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8650-gcc";
+			reg = <0 0x00100000 0 0x1f4200>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipcc: mailbox@406000 {
+			compatible = "qcom,sm8650-ipcc", "qcom,ipcc";
+			reg = <0 0x00406000 0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			uart15: serial@89c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				pinctrl-0 = <&qup_uart15_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xc>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8650-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8650-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sm8650-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0xa0000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8650-gpucc";
+			reg = <0 0x03d90000 0 0xa000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8650-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <0>, /* dsi0 */
+				 <0>,
+				 <0>, /* dsi1 */
+				 <0>,
+				 <0>, /* dp0 */
+				 <0>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8650-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x088e3000 0 0x154>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0x40 0>;
+
+				phys = <&usb_1_hsphy>,
+				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,usb3_lpm_capable;
+				snps,usb2-lpm-disable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+
+				dma-coherent;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8650-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			interrupt-parent = <&intc>;
+
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>,
+					  <138 251 5>, <143 244 4>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c228000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c228000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <15>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c229000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c229000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c22a000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c22a000 0 0x1000>, /* TM */
+			      <0 0x0c224000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <13>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c440000 0 0x80000>,
+			      <0 0x0c4c0000 0 0x20000>,
+			      <0 0x0c42d000 0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+
+			interrupt-controller;
+			#interrupt-cells = <4>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8650-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 211>;
+
+			wakeup-parent = <&pdc>;
+
+			qup_uart15_default: qup-uart15-default-state {
+				/* TX, RX */
+				pins = "gpio30", "gpio31";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17100000 0 0x10000>,		/* GICD */
+			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17140000 0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17420000 0 0x1000>;
+
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,
+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>,
+			      <0 0x17a30000 0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&CLUSTER_PD>;
+
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8650-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8650-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>,
+			      <0 0x17d94000 0 0x1000>;
+			reg-names = "freq-domain0",
+				    "freq-domain1",
+				    "freq-domain2",
+				    "freq-domain3";
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2",
+					  "dcvsh-irq-3";
+
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,sm8650-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu2-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				 cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsphvx-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsphmx-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsphmx-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsphmx-2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsphmx-3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				ddr0-config {
+					temperature = <90000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				ddr0-config {
+					temperature = <90000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-6-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-7-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss0-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss0-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss1-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss1-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss2-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss2-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss3-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss3-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};