diff mbox series

[1/2] dt-bindings: pinctrl: qcom: Add SC8380XP pinctrl

Message ID 20231025135058.11268-2-quic_sibis@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series pinctrl: qcom: Introduce Pinctrl/GPIO for SC8380XP | expand

Commit Message

Sibi Sankar Oct. 25, 2023, 1:50 p.m. UTC
From: Rajendra Nayak <quic_rjendra@quicinc.com>

Add device tree binding Documentation details for Qualcomm SC8380XP TLMM
device

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 .../bindings/pinctrl/qcom,sc8380xp-tlmm.yaml  | 143 ++++++++++++++++++
 1 file changed, 143 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc8380xp-tlmm.yaml

Comments

Krzysztof Kozlowski Oct. 27, 2023, 8:25 a.m. UTC | #1
On 25/10/2023 15:50, Sibi Sankar wrote:
> From: Rajendra Nayak <quic_rjendra@quicinc.com>
> 
> Add device tree binding Documentation details for Qualcomm SC8380XP TLMM
> device
> 


> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    tlmm: pinctrl@f100000 {
> +        compatible = "qcom,sc8380xp-tlmm";
> +        reg = <0x0f100000 0xf00000>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        gpio-ranges = <&tlmm 0 0 239>;

Is the 239 number a mistake or do you include here UFS reset?

Best regards,
Krzysztof
Sibi Sankar Nov. 17, 2023, 4:27 a.m. UTC | #2
Hey Krzysztof,

On 10/27/23 13:55, Krzysztof Kozlowski wrote:
> On 25/10/2023 15:50, Sibi Sankar wrote:
>> From: Rajendra Nayak <quic_rjendra@quicinc.com>
>>
>> Add device tree binding Documentation details for Qualcomm SC8380XP TLMM
>> device
>>
> 
> 
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    tlmm: pinctrl@f100000 {
>> +        compatible = "qcom,sc8380xp-tlmm";
>> +        reg = <0x0f100000 0xf00000>;
>> +        gpio-controller;
>> +        #gpio-cells = <2>;
>> +        gpio-ranges = <&tlmm 0 0 239>;
> 
> Is the 239 number a mistake or do you include here UFS reset?

We seem to be including UFS reset on all the previous Qaulcomm SoCs, so
continuing the same here.

-Sibi

> 
> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8380xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8380xp-tlmm.yaml
new file mode 100644
index 000000000000..098d3b91e8d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8380xp-tlmm.yaml
@@ -0,0 +1,143 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8380xp-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC8380XP TLMM block
+
+maintainers:
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SC8380XP SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8380xp-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 119
+
+  gpio-line-names:
+    maxItems: 238
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc8380xp-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc8380xp-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc8380xp-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-2][0-9]|23[0-7])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aon_cci, aoss_cti, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3, atest_usb,
+                audio_ext, audio_ref, cam_aon, cam_mclk, cci_async,
+                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3,
+                cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, ddr_pxi6, ddr_pxi7,
+                edp0_hot, edp0_lcd, edp1_hot, edp1_lcd, eusb0_ac, eusb1_ac,
+                eusb2_ac, eusb3_ac, eusb5_ac, eusb6_ac, gcc_gp1, gcc_gp2,
+                gcc_gp3, gpio, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, i2s1_data0,
+                i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, mdp_vsync0,
+                mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5,
+                mdp_vsync6, mdp_vsync7, mdp_vsync8, pcie3_clk, pcie4_clk,
+                pcie5_clk, pcie6a_clk, pcie6b_clk, phase_flag, pll_bist, pll_clk,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qspi00, qspi01, qspi02, qspi03, qspi0_clk, qspi0_cs0,
+                qspi0_cs1, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+                qup0_se5, qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
+                qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2,
+                qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup2_se7, sd_write, sdc4_clk,
+                sdc4_cmd, sdc4_data0, sdc4_data1, sdc4_data2, sdc4_data3, sys_throttle,
+                tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5,
+                tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, sense_pwm3, tsense_pwm4, usb0_dp, usb0_phy,
+                usb0_sbrx, usb0_sbtx, usb1_dp, usb1_phy, usb1_sbrx, usb1_sbtx,
+                usb2_dp, usb2_phy, usb2_sbrx, usb2_sbtx, vsense_trigger ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sc8380xp-tlmm";
+        reg = <0x0f100000 0xf00000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 239>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio26";
+                function = "qup2_se7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio27";
+                function = "qup2_se7";
+                bias-disable;
+            };
+        };
+    };
+...