| Message ID | 20231025144601.268645-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [1/3] soundwire: qcom: drop unneeded DAI .set_stream callback | expand |
On 10/25/23 09:45, Krzysztof Kozlowski wrote: > Qualcomm Soundwire controller drivers do not support multi-link setups, > so DAI .set_stream() callback will not be used. What's more, if called > it will overwrite the sdw_stream_runtime runtime set in DAI .startup > (qcom_swrm_startup()) causing issues (unsupported multi-link error) when > two Soundwire controllers are passed as codec DAIs. This last sentence is confusing at best. A controller can have one or more managers, each of whom can have one or more peripherals. only peripherals should expose codec DAIs, managers should expose CPU DAIs. Put differently, the controller is the host part while the peripheral is the codec part. "controllers passed as codec DAIs" is not really possible, or this was a typo? > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > drivers/soundwire/qcom.c | 11 ----------- > 1 file changed, 11 deletions(-) > > diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c > index f1b8d6ac5140..fe65c26c5281 100644 > --- a/drivers/soundwire/qcom.c > +++ b/drivers/soundwire/qcom.c > @@ -1267,16 +1267,6 @@ static int qcom_swrm_hw_free(struct snd_pcm_substream *substream, > return 0; > } > > -static int qcom_swrm_set_sdw_stream(struct snd_soc_dai *dai, > - void *stream, int direction) > -{ > - struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev); > - > - ctrl->sruntime[dai->id] = stream; > - > - return 0; > -} > - > static void *qcom_swrm_get_sdw_stream(struct snd_soc_dai *dai, int direction) > { > struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev); > @@ -1349,7 +1339,6 @@ static const struct snd_soc_dai_ops qcom_swrm_pdm_dai_ops = { > .hw_free = qcom_swrm_hw_free, > .startup = qcom_swrm_startup, > .shutdown = qcom_swrm_shutdown, > - .set_stream = qcom_swrm_set_sdw_stream, > .get_stream = qcom_swrm_get_sdw_stream, > }; >
On 25/10/2023 17:12, Pierre-Louis Bossart wrote: > > > On 10/25/23 09:45, Krzysztof Kozlowski wrote: >> Qualcomm Soundwire controller drivers do not support multi-link setups, >> so DAI .set_stream() callback will not be used. What's more, if called >> it will overwrite the sdw_stream_runtime runtime set in DAI .startup >> (qcom_swrm_startup()) causing issues (unsupported multi-link error) when >> two Soundwire controllers are passed as codec DAIs. > > This last sentence is confusing at best. > > A controller can have one or more managers, each of whom can have one or > more peripherals. > > only peripherals should expose codec DAIs, managers should expose CPU DAIs. > > Put differently, the controller is the host part while the peripheral is > the codec part. "controllers passed as codec DAIs" is not really > possible, or this was a typo? No, it wasn't a typo. Take a look here: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts#n1023 The <&swr0 0> is the controller, although probably I should call it manager, but in case of Qualcomm I think they are 1-to-1. Best regards, Krzysztof
>>> Qualcomm Soundwire controller drivers do not support multi-link setups, >>> so DAI .set_stream() callback will not be used. What's more, if called >>> it will overwrite the sdw_stream_runtime runtime set in DAI .startup >>> (qcom_swrm_startup()) causing issues (unsupported multi-link error) when >>> two Soundwire controllers are passed as codec DAIs. >> >> This last sentence is confusing at best. >> >> A controller can have one or more managers, each of whom can have one or >> more peripherals. >> >> only peripherals should expose codec DAIs, managers should expose CPU DAIs. >> >> Put differently, the controller is the host part while the peripheral is >> the codec part. "controllers passed as codec DAIs" is not really >> possible, or this was a typo? > > No, it wasn't a typo. Take a look here: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts#n1023 > > The <&swr0 0> is the controller, although probably I should call it > manager, but in case of Qualcomm I think they are 1-to-1. Is this a case where the SoundWire manager is part of a codec? In that case, how are the SoundWire peripheral modeled? The .set_stream callback was really meant to be used when you have a CPU DAI for the manager and a codec DAI for the peripheral(s). This seems to be a different configuration where CPU and codec DAIs are mixed.
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index f1b8d6ac5140..fe65c26c5281 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -1267,16 +1267,6 @@ static int qcom_swrm_hw_free(struct snd_pcm_substream *substream, return 0; } -static int qcom_swrm_set_sdw_stream(struct snd_soc_dai *dai, - void *stream, int direction) -{ - struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev); - - ctrl->sruntime[dai->id] = stream; - - return 0; -} - static void *qcom_swrm_get_sdw_stream(struct snd_soc_dai *dai, int direction) { struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev); @@ -1349,7 +1339,6 @@ static const struct snd_soc_dai_ops qcom_swrm_pdm_dai_ops = { .hw_free = qcom_swrm_hw_free, .startup = qcom_swrm_startup, .shutdown = qcom_swrm_shutdown, - .set_stream = qcom_swrm_set_sdw_stream, .get_stream = qcom_swrm_get_sdw_stream, };
Qualcomm Soundwire controller drivers do not support multi-link setups, so DAI .set_stream() callback will not be used. What's more, if called it will overwrite the sdw_stream_runtime runtime set in DAI .startup (qcom_swrm_startup()) causing issues (unsupported multi-link error) when two Soundwire controllers are passed as codec DAIs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- drivers/soundwire/qcom.c | 11 ----------- 1 file changed, 11 deletions(-)