[v4,3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts

Message ID	20231117125056.32503-4-quic_kbajaj@quicinc.com (mailing list archive)
State	Superseded
Headers	show Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="aFh7xzoH" From: Komal Bajaj <quic_kbajaj@quicinc.com> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> CC: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Komal Bajaj <quic_kbajaj@quicinc.com>, "Naina Mehta" <quic_nainmeht@quicinc.com> Subject: [PATCH v4 3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts Date: Fri, 17 Nov 2023 18:20:56 +0530 Message-ID: <20231117125056.32503-4-quic_kbajaj@quicinc.com> In-Reply-To: <20231117125056.32503-1-quic_kbajaj@quicinc.com> References: <20231117125056.32503-1-quic_kbajaj@quicinc.com> Precedence: bulk MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain
Series	Add support for qcm6490 idp and qcs6490 rb3gen2 board \| expand [v4,0/3] Add support for qcm6490 idp and qcs6490 rb3gen2 board [v4,1/3] dt-bindings: arm: qcom: Add QCM6490 IDP and QCS6490 RB3Gen2 board [v4,2/3] arm64: dts: qcom: Add base qcm6490 idp board dts [v4,3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 77babebe4904..4c0f9e4a2e5b 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts new file mode 100644 index 000000000000..dfe5df273dd4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -0,0 +1,409 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc7280.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/delete-node/ &ipa_fw_mem; +/delete-node/ &remoteproc_mpss; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; +/delete-node/ &wlan_ce_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Qualcomm Technologies, Inc. Robotics RB3gen2"; + compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + wpss_mem: wpss@84800000 { + reg = <0x0 0x84800000 0x0 0x1900000>; + no-map; + }; + + adsp_mem: adsp@86100000 { + reg = <0x0 0x86100000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88900000 { + reg = <0x0 0x88900000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@8a700000 { + reg = <0x0 0x8a700000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@8ae00000 { + reg = <0x0 0x8ae00000 0x0 0x500000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8b300000 { + reg = <0x0 0x8b300000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8b310000 { + reg = <0x0 0x8b310000 0x0 0xa000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8b31a000 { + reg = <0x0 0x8b31a000 0x0 0x2000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted_apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_s1b_1p872: smps1 { + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s2b_0p876: smps2 { + regulator-min-microvolt = <570070>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7b_0p972: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p272: smps8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b_0p912: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p072: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p504: ldo3 { + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_0p752: ldo4 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <820000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + reg_l5b_0p752: ldo5 { + regulator-min-microvolt = <552000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p952: ldo7 { + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_0p904: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p504: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_0p751: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_0p53: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_1p08: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_0p765: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_1p1: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_1p7: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c_2p19: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s2c_0p752: smps2 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s5c_0p752: smps5 { + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7c_0p752: smps7 { + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s9c_1p084: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p62: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_2p8: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p62: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p62: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p62: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <35440000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_0p88: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p65: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_2p7: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob_3p296: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <32 2>, <48 4>; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p912>; + + status = "okay"; +}; + +&wifi { + memory-region = <&wlan_fw_mem>; +};

[v4,3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts

Commit Message

Comments

Patch