diff mbox series

[net-next,RFC,v2,09/11] dt-bindings: net: Document Qcom QCA807x PHY package

Message ID 20231125001127.5674-10-ansuelsmth@gmail.com (mailing list archive)
State Superseded
Headers show
Series net: phy: Support DT PHY package | expand

Commit Message

Christian Marangi Nov. 25, 2023, 12:11 a.m. UTC
Document Qcom QCA807x PHY package.

Qualcomm QCA807X Ethernet PHY is PHY package of 2 or 5
IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
1000BASE-T PHY-s.

Document the required property to make the PHY package correctly
configure and work.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/net/qcom,qca807x.yaml | 148 ++++++++++++++++++
 1 file changed, 148 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/qcom,qca807x.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/qcom,qca807x.yaml b/Documentation/devicetree/bindings/net/qcom,qca807x.yaml
new file mode 100644
index 000000000000..f6f07c77a639
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,qca807x.yaml
@@ -0,0 +1,148 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,qca807x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCA807X Ethernet PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Qualcomm QCA807X Ethernet PHY is PHY package of 2 or 5
+  IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
+  1000BASE-T PHY-s.
+
+  They feature 2 SerDes, one for PSGMII or QSGMII connection with
+  MAC, while second one is SGMII for connection to MAC or fiber.
+
+  Both models have a combo port that supports 1000BASE-X and
+  100BASE-FX fiber.
+
+  Each PHY inside of QCA807x series has 4 digitally controlled
+  output only pins that natively drive LED-s for up to 2 attached
+  LEDs. Some vendor also use these 4 output for GPIO usage without
+  attaching LEDs.
+
+  Note that output pins can be set to drive LEDs OR GPIO, mixed
+  definition are not accepted.
+
+allOf:
+  - $ref: ethernet-phy-package.yaml#
+
+select:
+  properties:
+    $nodename:
+      pattern: "^ethernet-phy-package(@[a-f0-9]+)?$"
+
+  patternProperties:
+    ^ethernet-phy(@[a-f0-9]+)?$:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ethernet-phy-id004d.d0b2
+              - ethernet-phy-id004d.d0b1
+
+      required:
+        - compatible
+
+  required:
+    - $nodename
+
+properties:
+  qcom,package-mode:
+    enum:
+      - qsgmii
+      - psgmii
+
+  qcom,tx-driver-strength:
+    enum: [140, 160, 180, 200, 220
+           240, 260, 280, 300, 320
+           400, 500, 600]
+
+patternProperties:
+  ^ethernet-phy(@[a-f0-9]+)?$:
+    $ref: /schemas/net/ethernet-phy.yaml#
+
+    properties:
+      gpio-controller:
+        description: set the output lines as GPIO instead of LEDs
+        type: boolean
+
+      '#gpio-cells':
+        description: number of GPIO cells for the PHY
+        const: 2
+
+    dependencies:
+      gpio-controller: ['#gpio-cells']
+
+    if:
+      required:
+        - gpio-controller
+    then:
+      properties:
+        leds: false
+
+    unevaluatedProperties: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy-package@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            qcom,package-mode = "qsgmii";
+
+            ethernet-phy@0 {
+                compatible = "ethernet-phy-id004d.d0b2";
+                reg = <0>;
+
+                leds {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    led@0 {
+                        reg = <0>;
+                        color = <LED_COLOR_ID_GREEN>;
+                        function = LED_FUNCTION_LAN;
+                        default-state = "keep";
+                    };
+                };
+            };
+
+            ethernet-phy@1 {
+                compatible = "ethernet-phy-id004d.d0b2";
+                reg = <1>;
+            };
+
+            ethernet-phy@2 {
+                compatible = "ethernet-phy-id004d.d0b2";
+                reg = <2>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            ethernet-phy@3 {
+                compatible = "ethernet-phy-id004d.d0b2";
+                reg = <3>;
+            };
+
+            ethernet-phy@4 {
+                compatible = "ethernet-phy-id004d.d0b2";
+                reg = <4>;
+            };
+        };
+    };