From patchwork Thu Nov 30 01:36:14 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Anjelique Melendez X-Patchwork-Id: 13473957 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="CWWlhKix" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8DF8D10C3; Wed, 29 Nov 2023 17:36:54 -0800 (PST) Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3ATNdwSl025006; Thu, 30 Nov 2023 01:36:44 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=blBd/hyLuMfvjBs9Nw2jiXD7MhDYIRcjf8C6Snoxjd0=; b=CWWlhKixk+uIH/ZbnaVczCYlxPkA7KSNblcg/vpckmds0X9k7PPLjmxVjTgS75SqOf8k g/oElzOHzYeZf0mHpMPvmNz531LwDFyHGn39V9c5rtkBpc0fPHzpLtrwyqsBLOqpwYw9 BTQJmHPqKLdA9cRyF2lNuVmFxUVlLKGfAympjVVY6ecZTCdo2oamZXNpWaINRHasHfPP e/YnTJ5yttRjDwe0uWPMqTyJ9zQbH7HIWf6wmVYmh/VjTI9UGkkQQvrluzG7+XZGr7SQ R3OiV3rYAjbib2+LWsaYYGQvVah0f49LYoOljqMTZDKPMA22bP5BB1OavyaRdYiTUnXL 5A== Received: from nalasppmta02.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3up4cf9xwk-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 30 Nov 2023 01:36:44 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 3AU1ahSE016106 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 30 Nov 2023 01:36:43 GMT Received: from hu-amelende-lv.qualcomm.com (10.49.16.6) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.40; Wed, 29 Nov 2023 17:36:43 -0800 From: Anjelique Melendez To: , , , , , , , CC: , , , , , , , , , , "Anjelique Melendez" Subject: [PATCH v7 6/7] leds: rgb: leds-qcom-lpg: Include support for PPG with dedicated LUT SDAM Date: Wed, 29 Nov 2023 17:36:14 -0800 Message-ID: <20231130013615.14287-7-quic_amelende@quicinc.com> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20231130013615.14287-1-quic_amelende@quicinc.com> References: <20231130013615.14287-1-quic_amelende@quicinc.com> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: nalasex01a.na.qualcomm.com (10.47.209.196) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: I4RrjwCtS7ccNxfJj8ymxYHMTVVaASUt X-Proofpoint-ORIG-GUID: I4RrjwCtS7ccNxfJj8ymxYHMTVVaASUt X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_21,2023-11-29_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 lowpriorityscore=0 malwarescore=0 impostorscore=0 bulkscore=0 suspectscore=0 mlxlogscore=999 clxscore=1015 phishscore=0 priorityscore=1501 spamscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311300010 On PMICs such as PM8350C, the pattern lookup table (LUT) is stored in a separate SDAM from the one where the lpg per-channel data is stored. Add support for PPG with a dedicated LUT SDAM while maintaining backward compatibility for those targets that use only a single SDAM. Co-developed-by: Guru Das Srinagesh Signed-off-by: Guru Das Srinagesh Signed-off-by: Anjelique Melendez Reviewed-by: Lee Jones --- drivers/leds/rgb/leds-qcom-lpg.c | 92 +++++++++++++++++++++++++++----- 1 file changed, 78 insertions(+), 14 deletions(-) diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c index 8d2647aeb3b4..471b5b3e22ea 100644 --- a/drivers/leds/rgb/leds-qcom-lpg.c +++ b/drivers/leds/rgb/leds-qcom-lpg.c @@ -42,6 +42,8 @@ #define PWM_DTEST_REG(x) (0xe2 + (x) - 1) #define SDAM_REG_PBS_SEQ_EN 0x42 +#define SDAM_PBS_TRIG_SET 0xe5 +#define SDAM_PBS_TRIG_CLR 0xe6 #define TRI_LED_SRC_SEL 0x45 #define TRI_LED_EN_CTL 0x46 @@ -60,8 +62,12 @@ #define DEFAULT_TICK_DURATION_US 7800 #define RAMP_STEP_DURATION(x) (((x) * 1000 / DEFAULT_TICK_DURATION_US) & 0xff) +#define SDAM_MAX_DEVICES 2 /* LPG common config settings for PPG */ +#define SDAM_START_BASE 0x40 #define SDAM_REG_RAMP_STEP_DURATION 0x47 + +#define SDAM_LUT_SDAM_LUT_PATTERN_OFFSET 0x45 #define SDAM_LPG_SDAM_LUT_PATTERN_OFFSET 0x80 /* LPG per channel config settings for PPG */ @@ -70,6 +76,8 @@ #define SDAM_END_INDEX_OFFSET 0x3 #define SDAM_START_INDEX_OFFSET 0x4 #define SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET 0x6 +#define SDAM_PAUSE_HI_MULTIPLIER_OFFSET 0x8 +#define SDAM_PAUSE_LO_MULTIPLIER_OFFSET 0x9 struct lpg_channel; struct lpg_data; @@ -86,6 +94,7 @@ struct lpg_data; * @lut_bitmap: allocation bitmap for LUT entries * @pbs_dev: PBS device * @lpg_chan_sdam: LPG SDAM peripheral device + * @lut_sdam: LUT SDAM peripheral device * @pbs_en_bitmap: bitmap for tracking PBS triggers * @triled_base: base address of the TRILED block (optional) * @triled_src: power-source for the TRILED @@ -110,6 +119,7 @@ struct lpg { struct pbs_dev *pbs_dev; struct nvmem_device *lpg_chan_sdam; + struct nvmem_device *lut_sdam; unsigned long pbs_en_bitmap; u32 triled_base; @@ -249,6 +259,13 @@ static int lpg_clear_pbs_trigger(struct lpg *lpg, unsigned int lut_mask) rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_REG_PBS_SEQ_EN, 1, &val); if (rc < 0) return rc; + + if (lpg->lut_sdam) { + val = PBS_SW_TRIG_BIT; + rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_PBS_TRIG_CLR, 1, &val); + if (rc < 0) + return rc; + } } return 0; @@ -264,9 +281,15 @@ static int lpg_set_pbs_trigger(struct lpg *lpg, unsigned int lut_mask) if (rc < 0) return rc; - rc = qcom_pbs_trigger_event(lpg->pbs_dev, val); - if (rc < 0) - return rc; + if (lpg->lut_sdam) { + rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_PBS_TRIG_SET, 1, &val); + if (rc < 0) + return rc; + } else { + rc = qcom_pbs_trigger_event(lpg->pbs_dev, val); + if (rc < 0) + return rc; + } } lpg->pbs_en_bitmap |= lut_mask; @@ -313,8 +336,15 @@ static int lpg_lut_store_sdam(struct lpg *lpg, struct led_pattern *pattern, for (i = 0; i < len; i++) { brightness = pattern[i].brightness; - addr = SDAM_LPG_SDAM_LUT_PATTERN_OFFSET + i + idx; - rc = nvmem_device_write(lpg->lpg_chan_sdam, addr, 1, &brightness); + + if (lpg->lut_sdam) { + addr = SDAM_LUT_SDAM_LUT_PATTERN_OFFSET + i + idx; + rc = nvmem_device_write(lpg->lut_sdam, addr, 1, &brightness); + } else { + addr = SDAM_LPG_SDAM_LUT_PATTERN_OFFSET + i + idx; + rc = nvmem_device_write(lpg->lpg_chan_sdam, addr, 1, &brightness); + } + if (rc < 0) return rc; } @@ -581,13 +611,28 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan) struct nvmem_device *lpg_chan_sdam = chan->lpg->lpg_chan_sdam; unsigned int lo_idx = chan->pattern_lo_idx; unsigned int hi_idx = chan->pattern_hi_idx; - u8 val = 0, conf = 0; + u8 val = 0, conf = 0, lut_offset = 0; + unsigned int hi_pause, lo_pause; + struct lpg *lpg = chan->lpg; if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx) return; + hi_pause = DIV_ROUND_UP(chan->ramp_hi_pause_ms, chan->ramp_tick_ms); + lo_pause = DIV_ROUND_UP(chan->ramp_lo_pause_ms, chan->ramp_tick_ms); + if (!chan->ramp_oneshot) conf |= LPG_PATTERN_CONFIG_REPEAT; + if (chan->ramp_hi_pause_ms && lpg->lut_sdam) + conf |= LPG_PATTERN_CONFIG_PAUSE_HI; + if (chan->ramp_lo_pause_ms && lpg->lut_sdam) + conf |= LPG_PATTERN_CONFIG_PAUSE_LO; + + if (lpg->lut_sdam) { + lut_offset = SDAM_LUT_SDAM_LUT_PATTERN_OFFSET - SDAM_START_BASE; + hi_idx += lut_offset; + lo_idx += lut_offset; + } nvmem_device_write(lpg_chan_sdam, SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val); nvmem_device_write(lpg_chan_sdam, SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset, 1, &conf); @@ -596,6 +641,12 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan) val = RAMP_STEP_DURATION(chan->ramp_tick_ms); nvmem_device_write(lpg_chan_sdam, SDAM_REG_RAMP_STEP_DURATION, 1, &val); + + if (lpg->lut_sdam) { + nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &hi_pause); + nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &lo_pause); + } + } static void lpg_apply_lut_control(struct lpg_channel *chan) @@ -979,7 +1030,8 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern, * enabled. In this scenario the delta_t of the middle entry (i.e. the * last in the programmed pattern) determines the "high pause". * - * SDAM-based devices do not support "ping-pong", "low pause" or "high pause" + * SDAM-based devices do not support "ping pong", and only supports + * "low pause" and "high pause" with a dedicated SDAM LUT. */ /* Detect palindromes and use "ping pong" to reduce LUT usage */ @@ -1024,9 +1076,10 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern, /* * Find "low pause" and "high pause" in the pattern in the LUT case. - * SDAM-based devices require equal duration of all steps + * SDAM-based devices without dedicated LUT SDAM require equal + * duration of all steps. */ - if (lpg->lut_base) { + if (lpg->lut_base || lpg->lut_sdam) { lo_pause = pattern[0].delta_t; hi_pause = pattern[actual_len - 1].delta_t; } else { @@ -1491,17 +1544,28 @@ static int lpg_init_sdam(struct lpg *lpg) sdam_count = of_property_count_strings(lpg->dev->of_node, "nvmem-names"); if (sdam_count <= 0) return 0; + if (sdam_count > SDAM_MAX_DEVICES) + return -EINVAL; - /* Get the SDAM device for LPG/LUT config */ + /* Get the 1st SDAM device for LPG/LUT config */ lpg->lpg_chan_sdam = devm_nvmem_device_get(lpg->dev, "lpg_chan_sdam"); if (IS_ERR(lpg->lpg_chan_sdam)) return dev_err_probe(lpg->dev, PTR_ERR(lpg->lpg_chan_sdam), "Failed to get LPG chan SDAM device\n"); - lpg->pbs_dev = get_pbs_client_device(lpg->dev); - if (IS_ERR(lpg->pbs_dev)) - return dev_err_probe(lpg->dev, PTR_ERR(lpg->pbs_dev), - "Failed to get PBS client device\n"); + if (sdam_count == 1) { + /* Get PBS device node if single SDAM device */ + lpg->pbs_dev = get_pbs_client_device(lpg->dev); + if (IS_ERR(lpg->pbs_dev)) + return dev_err_probe(lpg->dev, PTR_ERR(lpg->pbs_dev), + "Failed to get PBS client device\n"); + } else if (sdam_count == 2) { + /* Get the 2nd SDAM device for LUT pattern */ + lpg->lut_sdam = devm_nvmem_device_get(lpg->dev, "lut_sdam"); + if (IS_ERR(lpg->lut_sdam)) + return dev_err_probe(lpg->dev, PTR_ERR(lpg->lut_sdam), + "Failed to get LPG LUT SDAM device\n"); + } for (i = 0; i < lpg->num_channels; i++) { struct lpg_channel *chan = &lpg->channels[i];