From patchwork Tue Dec 12 10:24:10 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Abel Vesa X-Patchwork-Id: 13488888 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="YCYWjVNL" Received: from mail-lf1-x129.google.com (mail-lf1-x129.google.com [IPv6:2a00:1450:4864:20::129]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A1958B3 for ; Tue, 12 Dec 2023 02:24:28 -0800 (PST) Received: by mail-lf1-x129.google.com with SMTP id 2adb3069b0e04-50bee606265so5755458e87.2 for ; Tue, 12 Dec 2023 02:24:28 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1702376667; x=1702981467; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=Rg7MFtEg2PInxEY21s26GWq5/HW83K8aZpIHWNKiTxQ=; b=YCYWjVNLZxE89BmAjYOwowyQRYMA9D5Xf9/EvK9IR2r3te5qtPr/A6sGED6N8Q6+dB DdKGsP64/tqKVMQchnpd2Vb+Xd5avQ0Aa619iQIK10QRQOJ9XMdrUBvGQeF8Xg0XSd7P Ec6ST7hrGlMyG5A2ND6Dwn3S4EW4r6EXGznlDF/LkrFmwXn/NiQFdiTrEySfXqP1ykE2 VCHu/QJ9wFjNzmSzPVuQvN8IA8mS1PHgLuo+ydBPfX/c7/lOQUX4PzGwC2yPFCkHTWPG ONOrcAFLRlkZ2R5qN6mlkIFhdiLm7plkpn6IfG7sV2JwiuNGIN3hfwZT2kJjDg6YZztO G62g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1702376667; x=1702981467; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Rg7MFtEg2PInxEY21s26GWq5/HW83K8aZpIHWNKiTxQ=; b=J9esKDHtyLhwdar89W3+JYC+Cdb2/GB9EDS5i0sj/hIN/TQMjLXevx+bmha40nYRJY FqggFjN5RqQh4+wQ005aOzsIPcFy/VVHXR0bpvHJf+VNgAd45b0MhZQfX/ZsWu1z9JBO lYCOvwGuU92b4vu6IjjR0sm1oVXzbwP5Ewwo+VVpp94cy//UB5LOp22A6fozNEIQ2XBq HfvcUUlZeErlqeu0vZ1slSGvc22bIRZBT8096Xxol820sjvuDQc37scs+3p45fsg8e9b m9uIvIPNEtS3G5OV0yqewSovr1kRornBIkc8ncKQ96o/JCM2jAJII7wsHzxNr6gfI9s0 KWeQ== X-Gm-Message-State: AOJu0YzSwUGbIJXOm/IcCyc+TtUzigbq4O2LI4mE8XwaghbLKpsEZGPZ uPugcVYxB7U1K2N5WoMdyB9jmg== X-Google-Smtp-Source: AGHT+IE5jSV3RIIjPFf1MSUc8XDNr2fDzgz57vijV2jMCCNKHCtFKdAtVHfTTIEMEu6dA9aWaaqDpg== X-Received: by 2002:ac2:5b9b:0:b0:50c:c7d:9ef2 with SMTP id o27-20020ac25b9b000000b0050c0c7d9ef2mr2723927lfn.131.1702376666602; Tue, 12 Dec 2023 02:24:26 -0800 (PST) Received: from [127.0.1.1] ([79.115.23.25]) by smtp.gmail.com with ESMTPSA id ga16-20020a1709070c1000b00a1c7f8fe581sm6052801ejc.221.2023.12.12.02.24.25 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 12 Dec 2023 02:24:26 -0800 (PST) From: Abel Vesa Date: Tue, 12 Dec 2023 12:24:10 +0200 Subject: [PATCH 1/2] arm64: dts: qcom: x1e80100: Add all missing nodes Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231212-x1e80100-dts-missing-nodes-v1-1-1472efec2b08@linaro.org> References: <20231212-x1e80100-dts-missing-nodes-v1-0-1472efec2b08@linaro.org> In-Reply-To: <20231212-x1e80100-dts-missing-nodes-v1-0-1472efec2b08@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Abel Vesa , Rajendra Nayak X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=39175; i=abel.vesa@linaro.org; h=from:subject:message-id; bh=lKvVqn4YyZC1tXUhO+FpjyDVxuaQPRL82ie6rlotJV4=; b=owEBbQKS/ZANAwAKARtfRMkAlRVWAcsmYgBleDTV8GUFp+hVk4Esu43l+Tr8VWhjp3Tp820sI RVHOU5LqGiJAjMEAAEKAB0WIQRO8+4RTnqPKsqn0bgbX0TJAJUVVgUCZXg01QAKCRAbX0TJAJUV Vh9lD/9dinLIoQkkYaKYtbiBu7fikqW9siFzDLKYfXjA028QznkGJQrykGHTsW+n8A1/otuEYx6 culdM9T+JSX3EusIlMElPh406PePpTSaG8U9EjFptcLOb0/wf6Rq80FqkNRyd+vshrRv6s4MjRW c8kg/aa+ybD6hBIGWzN7aetHy0clmBqYsr+DBfJCt8rBXPbsKfKP+qhyydr7jwPK+mod67GGgHP Oq6argyYxXeNU7Vr9a3qn1yuSEavZQ11wgibRQcjKqmKMfQzy/PPYLz1eAq3XDJyGeqfPay+MpT bt2AfMvrF8F6a8hjctCxp669hp/oDAfbMusDa0PGSfX51uiWd7mI9ZehXy8VY/SmMTHuude8exQ ve3wvpSq+3C2PGkQW/AhzUWpNOuxZxdj3GztKs8Mt8z9n5j5yiKCr+Y0n+EQtUrdB4h3NdpJh+9 QrJneUag0M7UDTlsZMX5ZrIfebquc9IXc0LeMRiYdYxteXSzMzMjheD+Bs1ibFec1rWkjeVNkBF EZooHZglOTJRg02lUyCoTmKlFNYM5YPv2gShMIr9IWf5Hr1fnW0yY1+Wi4+aF6ctwDF1LfUup9p VG2Wz7Egzpztun+gvcN69ElW9w3PTqbBeohIdEeswvQS2xJHOU8nxARil6vuMeGBgK2uogTxth6 lWzeE+ug43/lnOA== X-Developer-Key: i=abel.vesa@linaro.org; a=openpgp; fpr=6AFF162D57F4223A8770EF5AF7BF214136F41FAE Add all missing nodes which describe entire X1E80100 platform. Co-developed-by: Rajendra Nayak Signed-off-by: Rajendra Nayak Signed-off-by: Abel Vesa --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1282 +++++++++++++++++++++++++++++++- 1 file changed, 1277 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index da691e2f3209..61cc36554eab 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -4,11 +4,16 @@ */ #include +#include #include +#include +#include #include #include #include #include +#include +#include #include #include #include @@ -662,6 +667,58 @@ smem_mem: smem@ffe00000 { }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; @@ -677,13 +734,13 @@ gcc: clock-controller@100000 { clocks = <&bi_tcxo_div2>, <&sleep_clk>, <0>, + <&pcie4_phy>, <0>, + <&pcie6a_phy>, <0>, - <0>, - <0>, - <0>, - <0>, - <0>; + <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; power-domains = <&rpmhpd RPMHPD_CX>; #clock-cells = <1>; @@ -691,6 +748,17 @@ gcc: clock-controller@100000 { #power-domain-cells = <1>; }; + ipcc: mailbox@408000 { + compatible = "qcom,x1e80100-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + gpi_dma2: dma-controller@800000 { compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00800000 0 0x60000>; @@ -2428,6 +2496,165 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, }; }; + gpucc: clock-controller@3d90000 { + compatible = "qcom,x1e80100-gpucc"; + reg = <0 0x3d90000 0 0xa000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CPH_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CPH_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + camcc: clock-controller@ade0000 { + compatible = "qcom,x1e80100-camcc"; + reg = <0 0xade0000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + status = "disabled"; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,x1e80100-dispcc"; + reg = <0 0xaf00000 0 0x20000>; + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <0>, /* dsi0 */ + <0>, + <0>, /* dsi1 */ + <0>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp0 */ + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, /* dp0 */ + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <&mdss_dp3_phy 0>, /* dp3 */ + <&mdss_dp3_phy 1>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_1_ss0_hsphy: phy@fd3000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x0fd3000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_1_ss0_qmpphy: phy@fd5000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0xfd5000 0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc GCC_USB_1_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB4_0_DP0_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1_ss1_hsphy: phy@fd9000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x0fd9000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + status = "disabled"; + }; + + usb_1_ss1_qmpphy: phy@fda000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0xfda000 0 0x4000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc GCC_USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB4_1_DP0_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1_ss2_hsphy: phy@fde000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x0fde000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_TERT_BCR>; + + status = "disabled"; + }; + + usb_1_ss2_qmpphy: phy@fdf000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0xfdf000 0 0x4000>; + + clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc GCC_USB30_TERT_GDSC>; + + resets = <&gcc GCC_USB3_PHY_TERT_BCR>, + <&gcc GCC_USB4_2_DP0_PHY_TERT_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + cnoc_main: interconnect@1500000 { compatible = "qcom,x1e80100-cnoc-main"; reg = <0 0x1500000 0 0x14400>; @@ -2536,12 +2763,204 @@ mmss_noc: interconnect@1780000 { #interconnect-cells = <2>; }; + pcie6a: pci@1bf8000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0x0 0x01bf8000 0x0 0x3000>, + <0x0 0x70000000 0x0 0xf1d>, + <0x0 0x70000f20 0x0 0xa8>, + <0x0 0x70001000 0x0 0x1000>, + <0x0 0x70100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>, + <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <7>; + num-lanes = <2>; + + interrupts = ; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 843 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 844 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 845 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 772 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_6A_AUX_CLK>, + <&gcc GCC_PCIE_6A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_6A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_6A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_6A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_6A_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_south_anoc MASTER_PCIE_6A 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_6A 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_6A_BCR>, + <&gcc GCC_PCIE_6A_LINK_DOWN_BCR>; + reset-names = "pci", "link_down"; + + power-domains = <&gcc GCC_PCIE_6A_GDSC>; + + phys = <&pcie6a_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie6a_phy: phy@1bfc000 { + compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy"; + reg = <0x0 0x01bfc000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>, + <&gcc GCC_PCIE_6A_CFG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_6A_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_6A_PHY_BCR>, + <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>; + reset-names = "phy", "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie6a_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie4: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x7c000000 0 0xf1d>, + <0 0x7c000f40 0 0xa8>, + <0 0x7c001000 0 0x1000>, + <0 0x7c100000 0 0x100000>, + <0 0x01c0b000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x7c200000 0x0 0x100000>, + <0x02000000 0x0 0x7c300000 0x0 0x7c300000 0x0 0x3d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <5>; + num-lanes = <2>; + + interrupts = , + , + , + ; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_south_anoc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_4_BCR>; + reset-names = "pci"; + + power-domains = <&gcc GCC_PCIE_4_GDSC>; + + phys = <&pcie4_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie4_phy: phy@1c0e000 { + compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_4_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_4_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_4_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie4_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0 0x01f40000 0 0x20000>; #hwlock-cells = <1>; }; + tcsr: clock-controller@1fc0000 { + compatible = "qcom,x1e80100-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + gem_noc: interconnect@26400000 { compatible = "qcom,x1e80100-gem-noc"; reg = <0 0x26400000 0 0x311200>; @@ -2587,6 +3006,739 @@ lpass_lpicx_noc: interconnect@7430000 { #interconnect-cells = <2>; }; + usb_2_hsphy: phy@88e0000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x088e0000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_USB20_HS_BCR>; + + status = "disabled"; + }; + + usb_1_ss2: usb@a0f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a0f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>, + <&gcc GCC_USB30_TERT_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>, + <&gcc GCC_USB30_TERT_SLEEP_CLK>, + <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_TERT_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_RISING>, + <&pdc 57 IRQ_TYPE_EDGE_RISING>, + <&pdc 58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc GCC_USB30_TERT_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_TERT_BCR>; + + interconnects = <&usb_south_anoc MASTER_USB3_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_1_ss2_dwc3: usb@a000000 { + compatible = "snps,dwc3"; + reg = <0 0x0a000000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x14a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + phys = <&usb_1_ss2_hsphy>, <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_1_ss2_role_switch: endpoint { + }; + }; + }; + }; + + usb_2: usb@a2f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a2f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 50 IRQ_TYPE_EDGE_BOTH>, + <&pdc 49 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc GCC_USB20_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB20_PRIM_BCR>; + + interconnects = <&usb_north_anoc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_2_dwc3: usb@a200000 { + compatible = "snps,dwc3"; + reg = <0 0x0a200000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x14e0 0x0>; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + + port { + usb_2_role_switch: endpoint { + }; + }; + }; + }; + + usb_1_ss0: usb@a6f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 61 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "pwr_event", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + wakeup-source; + + status = "disabled"; + + usb_1_ss0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x1420 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + phys = <&usb_1_ss0_hsphy>, <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_1_ss0_role_switch: endpoint { + }; + }; + }; + }; + + usb_1_ss1: usb@a8f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 47 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 11 IRQ_TYPE_EDGE_RISING>, + <&pdc 60 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "pwr_event", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc GCC_USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&usb_south_anoc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_1_ss1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x1460 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + phys = <&usb_1_ss1_hsphy>, <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_1_ss1_role_switch: endpoint { + }; + }; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,x1e80100-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = ; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK_SRC>; + assigned-clock-parents = <&dispcc DISP_CC_PLL0>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>, + <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", + "mdp1-mem"; + + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,x1e80100-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + + mdss_intf4_out: endpoint { + remote-endpoint = <&mdss_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + + mdss_intf5_out: endpoint { + remote-endpoint = <&mdss_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + + mdss_intf6_out: endpoint { + remote-endpoint = <&mdss_dp2_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&mdss_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp1: displayport-controller@ae98000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae98000 0 0x200>, + <0 0xae98200 0 0x200>, + <0 0xae98400 0 0x600>, + <0 0xae99000 0 0x400>, + <0 0xae99400 0 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <13>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&mdss_dp1_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp1_in: endpoint { + remote-endpoint = <&mdss_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp1_out: endpoint { + }; + }; + }; + + mdss_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp2: displayport-controller@ae9a000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae9a000 0 0x200>, + <0 0xae9a200 0 0x200>, + <0 0xae9a400 0 0x600>, + <0 0xae9b000 0 0x400>, + <0 0xae9b400 0 0x400>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss>; + interrupts = <14>; + phys = <&mdss_dp2_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss_dp2_phy 0>, <&mdss_dp2_phy 1>; + operating-points-v2 = <&mdss_dp2_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp2_in: endpoint { + remote-endpoint = <&mdss_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp3: displayport-controller@aea0000 { + compatible = "qcom,x1e80100-dp", "qcom,sm8350-dp"; + reg = <0 0xaea0000 0 0x200>, + <0 0xaea0200 0 0x200>, + <0 0xaea0400 0 0x600>, + <0 0xaea1000 0 0x400>, + <0 0xaea1400 0 0x400>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss>; + interrupts = <15>; + phys = <&mdss_dp3_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss_dp3_phy 0>, <&mdss_dp3_phy 1>; + operating-points-v2 = <&mdss_dp3_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp3_in: endpoint { + remote-endpoint = <&mdss_intf5_out>; + + link-frequencies = /bits/ 64 <8100000000>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + }; + + mdss_dp2_phy: phy@aec2a00 { + compatible = "qcom,x1e80100-dp-phy"; + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xec>, + <0 0x0aec2600 0 0xec>, + <0 0x0aec2000 0 0x1c8>; + + clocks = <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + + power-domains = <&rpmhpd RPMHPD_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp3_phy: phy@aec5a00 { + compatible = "qcom,x1e80100-dp-phy"; + reg = <0 0x0aec5a00 0 0x19c>, + <0 0x0aec5200 0 0xec>, + <0 0x0aec5600 0 0xec>, + <0 0x0aec5000 0 0x1c8>; + + clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + + power-domains = <&rpmhpd RPMHPD_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,x1e80100-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -2599,6 +3751,18 @@ pdc: interrupt-controller@b220000 { interrupt-controller; }; + aoss_qmp: power-management@c300000 { + compatible = "qcom,x1e80100-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + tlmm: pinctrl@f100000 { compatible = "qcom,x1e80100-tlmm"; reg = <0 0x0f100000 0 0xf00000>; @@ -3492,6 +4656,29 @@ frame@1780d000 { }; }; + cpucp_mbox: mailbox@18830000 { + compatible = "qcom,x1e80100-cpucp-mbox", "qcom,cpucp-mbox"; + reg = <0 0x18830000 0 0x300>, <0 0x17430000 0 0x4C08>; + + interrupts = ; + + #mbox-cells = <1>; + }; + + sram: sram@18b4e000 { + compatible = "mmio-sram"; + reg = <0x0 0x18b4e000 0x0 0x400>; + ranges = <0x0 0x0 0x18b4e000 0x400>; + + #address-cells = <1>; + #size-cells = <1>; + + cpu_scp_lpri: scmi-shmem@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x400>; + }; + }; + system-cache-controller@25000000 { compatible = "qcom,x1e80100-llcc"; reg = <0 0x25000000 0 0x200000>, @@ -3514,6 +4701,91 @@ system-cache-controller@25000000 { "llcc_broadcast_base"; interrupts = ; }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,x1e80100-adsp-pas"; + reg = <0x0 0x30000000 0x0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", "lmx"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,x1e80100-cdsp-pas"; + reg = <0x0 0x32300000 0x0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP>; + power-domain-names = "cx", "mxc", "nsp"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; }; timer {