diff mbox series

[6/6] arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting

Message ID 20231214-topic-sc8180_fixes-v1-6-421904863006@linaro.org (mailing list archive)
State Accepted
Headers show
Series SC8180X fixes | expand

Commit Message

Konrad Dybcio Dec. 14, 2023, 6:13 p.m. UTC 
The UFS driver expects to be able to set load (and by extension, mode)
on the supplied regulators. Add the necessary properties to make that
possible.

Fixes: 2ce38cc1e8fe ("arm64: dts: qcom: sc8180x: Introduce Primus")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index adddf360c7fc..bfee60c93ccc 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -386,12 +386,18 @@  vreg_l7e_1p8: ldo7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10e_2p9: ldo10 {
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l12e: ldo12 {