| Message ID | 20231219005007.11644-6-quic_tengfan@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: qcom: add AIM300 AIoT board support | expand |
On Tue, 19 Dec 2023 at 02:52, Tengfei Fan <quic_tengfan@quicinc.com> wrote: > > AIM300 is a module with QCS8550 SoC, UFS and PMIC chip. > AIM300 Series is a highly optimized family of modules designed to support > AIoT applications. The Module is mounted onto Qualcomm AIoT carrier board > to support verification, evaluation and development. > > Co-developed-by: Fenglin Wu <quic_fenglinw@quicinc.com> > Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> > Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> > --- > arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 371 +++++++++++++++++++ > 1 file changed, 371 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi > new file mode 100644 > index 000000000000..04ca4597f952 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi > @@ -0,0 +1,371 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "qcs8550.dtsi" > +#include "pm8010.dtsi" > +#include "pm8550.dtsi" > +#include "pm8550b.dtsi" > +#define PMK8550VE_SID 5 > +#include "pm8550ve.dtsi" > +#include "pm8550vs.dtsi" > +#include "pmk8550.dtsi" > +#include "pmr735d_a.dtsi" > +#include "pmr735d_b.dtsi" > + > +/ { > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + }; > +}; Is VPH_PWR regulator present on the SoM or on the carrier board? > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm8550-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vdd-bob1-supply = <&vph_pwr>; > + vdd-bob2-supply = <&vph_pwr>; > + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; > + vdd-l2-l13-l14-supply = <&vreg_bob1>; > + vdd-l3-supply = <&vreg_s4g_1p25>; > + vdd-l5-l16-supply = <&vreg_bob1>; > + vdd-l6-l7-supply = <&vreg_bob1>; > + vdd-l8-l9-supply = <&vreg_bob1>; > + vdd-l11-supply = <&vreg_s4g_1p25>; > + vdd-l12-supply = <&vreg_s6g_1p86>; > + vdd-l15-supply = <&vreg_s6g_1p86>; > + vdd-l17-supply = <&vreg_bob2>; > + > + vreg_bob1: bob1 { > + regulator-name = "vreg_bob1"; > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob2: bob2 { > + regulator-name = "vreg_bob2"; > + regulator-min-microvolt = <2720000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1b_1p8: ldo1 { > + regulator-name = "vreg_l1b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2b_3p0: ldo2 { > + regulator-name = "vreg_l2b_3p0"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5b_3p1: ldo5 { > + regulator-name = "vreg_l5b_3p1"; > + regulator-min-microvolt = <3104000>; > + regulator-max-microvolt = <3104000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6b_1p8: ldo6 { > + regulator-name = "vreg_l6b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7b_1p8: ldo7 { > + regulator-name = "vreg_l7b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8b_1p8: ldo8 { > + regulator-name = "vreg_l8b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9b_2p9: ldo9 { > + regulator-name = "vreg_l9b_2p9"; > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11b_1p2: ldo11 { > + regulator-name = "vreg_l11b_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12b_1p8: ldo12 { > + regulator-name = "vreg_l12b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13b_3p0: ldo13 { > + regulator-name = "vreg_l13b_3p0"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14b_3p2: ldo14 { > + regulator-name = "vreg_l14b_3p2"; > + regulator-min-microvolt = <3200000>; > + regulator-max-microvolt = <3200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15b_1p8: ldo15 { > + regulator-name = "vreg_l15b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l16b_2p8: ldo16 { > + regulator-name = "vreg_l16b_2p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17b_2p5: ldo17 { > + regulator-name = "vreg_l17b_2p5"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-l1-supply = <&vreg_s4g_1p25>; > + vdd-l2-supply = <&vreg_s4e_0p95>; > + vdd-l3-supply = <&vreg_s4e_0p95>; > + > + vreg_l3c_0p9: ldo3 { > + regulator-name = "vreg_l3c_0p9"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-2 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "d"; > + > + vdd-l1-supply = <&vreg_s4e_0p95>; > + vdd-l2-supply = <&vreg_s4e_0p95>; > + vdd-l3-supply = <&vreg_s4e_0p95>; > + > + vreg_l1d_0p88: ldo1 { > + regulator-name = "vreg_l1d_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-3 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "e"; > + > + vdd-l1-supply = <&vreg_s4e_0p95>; > + vdd-l2-supply = <&vreg_s4e_0p95>; > + vdd-l3-supply = <&vreg_s4g_1p25>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + > + vreg_s4e_0p95: smps4 { > + regulator-name = "vreg_s4e_0p95"; > + regulator-min-microvolt = <904000>; > + regulator-max-microvolt = <984000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5e_1p08: smps5 { > + regulator-name = "vreg_s5e_1p08"; > + regulator-min-microvolt = <1010000>; > + regulator-max-microvolt = <1120000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1e_0p88: ldo1 { > + regulator-name = "vreg_l1e_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2e_0p9: ldo2 { > + regulator-name = "vreg_l2e_0p9"; > + regulator-min-microvolt = <870000>; > + regulator-max-microvolt = <970000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3e_1p2: ldo3 { > + regulator-name = "vreg_l3e_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-4 { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "f"; > + > + vdd-l1-supply = <&vreg_s4e_0p95>; > + vdd-l2-supply = <&vreg_s4e_0p95>; > + vdd-l3-supply = <&vreg_s4e_0p95>; > + vdd-s4-supply = <&vph_pwr>; > + > + vreg_s4f_0p5: smps4 { > + regulator-name = "vreg_s4f_0p5"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <600000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1f_0p9: ldo1 { > + regulator-name = "vreg_l1f_0p9"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2f_0p88: ldo2 { > + regulator-name = "vreg_l2f_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3f_0p88: ldo3 { > + regulator-name = "vreg_l3f_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-5 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "g"; > + vdd-l1-supply = <&vreg_s4g_1p25>; > + vdd-l2-supply = <&vreg_s4g_1p25>; > + vdd-l3-supply = <&vreg_s4g_1p25>; > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + > + vreg_s1g_1p25: smps1 { > + regulator-name = "vreg_s1g_1p25"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s2g_0p85: smps2 { > + regulator-name = "vreg_s2g_0p85"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s3g_0p8: smps3 { > + regulator-name = "vreg_s3g_0p8"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1004000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s4g_1p25: smps4 { > + regulator-name = "vreg_s4g_1p25"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5g_0p85: smps5 { > + regulator-name = "vreg_s5g_0p85"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1004000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s6g_1p86: smps6 { > + regulator-name = "vreg_s6g_1p86"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1g_1p2: ldo1 { > + regulator-name = "vreg_l1g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2g_1p2: ldo2 { > + regulator-name = "vreg_l2g_1p2"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3g_1p2: ldo3 { > + regulator-name = "vreg_l3g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&ufs_mem_hc { > + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; > + vcc-supply = <&vreg_l17b_2p5>; > + vcc-max-microamp = <1300000>; > + vccq-supply = <&vreg_l1g_1p2>; > + vccq-max-microamp = <1200000>; > + vdd-hba-supply = <&vreg_l3g_1p2>; > + > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&vreg_l1d_0p88>; > + vdda-pll-supply = <&vreg_l3e_1p2>; > + > + status = "okay"; > +}; > -- > 2.17.1 > >
On 12/19/2023 6:25 PM, Dmitry Baryshkov wrote: > On Tue, 19 Dec 2023 at 02:52, Tengfei Fan <quic_tengfan@quicinc.com> wrote: >> >> AIM300 is a module with QCS8550 SoC, UFS and PMIC chip. >> AIM300 Series is a highly optimized family of modules designed to support >> AIoT applications. The Module is mounted onto Qualcomm AIoT carrier board >> to support verification, evaluation and development. >> >> Co-developed-by: Fenglin Wu <quic_fenglinw@quicinc.com> >> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> >> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 371 +++++++++++++++++++ >> 1 file changed, 371 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi >> new file mode 100644 >> index 000000000000..04ca4597f952 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi >> @@ -0,0 +1,371 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >> +#include "qcs8550.dtsi" >> +#include "pm8010.dtsi" >> +#include "pm8550.dtsi" >> +#include "pm8550b.dtsi" >> +#define PMK8550VE_SID 5 >> +#include "pm8550ve.dtsi" >> +#include "pm8550vs.dtsi" >> +#include "pmk8550.dtsi" >> +#include "pmr735d_a.dtsi" >> +#include "pmr735d_b.dtsi" >> + >> +/ { >> + vph_pwr: vph-pwr-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vph_pwr"; >> + regulator-min-microvolt = <3700000>; >> + regulator-max-microvolt = <3700000>; >> + >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> +}; > > Is VPH_PWR regulator present on the SoM or on the carrier board?VPH_PWR regulator present on the SoM. > >> + >> +&apps_rsc { >> + regulators-0 { >> + compatible = "qcom,pm8550-rpmh-regulators"; >> + qcom,pmic-id = "b"; >> + >> + vdd-bob1-supply = <&vph_pwr>; >> + vdd-bob2-supply = <&vph_pwr>; >> + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; >> + vdd-l2-l13-l14-supply = <&vreg_bob1>; >> + vdd-l3-supply = <&vreg_s4g_1p25>; >> + vdd-l5-l16-supply = <&vreg_bob1>; >> + vdd-l6-l7-supply = <&vreg_bob1>; >> + vdd-l8-l9-supply = <&vreg_bob1>; >> + vdd-l11-supply = <&vreg_s4g_1p25>; >> + vdd-l12-supply = <&vreg_s6g_1p86>; >> + vdd-l15-supply = <&vreg_s6g_1p86>; >> + vdd-l17-supply = <&vreg_bob2>; >> + >> + vreg_bob1: bob1 { >> + regulator-name = "vreg_bob1"; >> + regulator-min-microvolt = <3296000>; >> + regulator-max-microvolt = <3960000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_bob2: bob2 { >> + regulator-name = "vreg_bob2"; >> + regulator-min-microvolt = <2720000>; >> + regulator-max-microvolt = <3960000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l1b_1p8: ldo1 { >> + regulator-name = "vreg_l1b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2b_3p0: ldo2 { >> + regulator-name = "vreg_l2b_3p0"; >> + regulator-min-microvolt = <3008000>; >> + regulator-max-microvolt = <3008000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l5b_3p1: ldo5 { >> + regulator-name = "vreg_l5b_3p1"; >> + regulator-min-microvolt = <3104000>; >> + regulator-max-microvolt = <3104000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l6b_1p8: ldo6 { >> + regulator-name = "vreg_l6b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3008000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l7b_1p8: ldo7 { >> + regulator-name = "vreg_l7b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3008000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l8b_1p8: ldo8 { >> + regulator-name = "vreg_l8b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3008000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l9b_2p9: ldo9 { >> + regulator-name = "vreg_l9b_2p9"; >> + regulator-min-microvolt = <2960000>; >> + regulator-max-microvolt = <3008000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l11b_1p2: ldo11 { >> + regulator-name = "vreg_l11b_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1504000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l12b_1p8: ldo12 { >> + regulator-name = "vreg_l12b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l13b_3p0: ldo13 { >> + regulator-name = "vreg_l13b_3p0"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l14b_3p2: ldo14 { >> + regulator-name = "vreg_l14b_3p2"; >> + regulator-min-microvolt = <3200000>; >> + regulator-max-microvolt = <3200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l15b_1p8: ldo15 { >> + regulator-name = "vreg_l15b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l16b_2p8: ldo16 { >> + regulator-name = "vreg_l16b_2p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l17b_2p5: ldo17 { >> + regulator-name = "vreg_l17b_2p5"; >> + regulator-min-microvolt = <2504000>; >> + regulator-max-microvolt = <2504000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-1 { >> + compatible = "qcom,pm8550vs-rpmh-regulators"; >> + qcom,pmic-id = "c"; >> + >> + vdd-l1-supply = <&vreg_s4g_1p25>; >> + vdd-l2-supply = <&vreg_s4e_0p95>; >> + vdd-l3-supply = <&vreg_s4e_0p95>; >> + >> + vreg_l3c_0p9: ldo3 { >> + regulator-name = "vreg_l3c_0p9"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <912000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-2 { >> + compatible = "qcom,pm8550vs-rpmh-regulators"; >> + qcom,pmic-id = "d"; >> + >> + vdd-l1-supply = <&vreg_s4e_0p95>; >> + vdd-l2-supply = <&vreg_s4e_0p95>; >> + vdd-l3-supply = <&vreg_s4e_0p95>; >> + >> + vreg_l1d_0p88: ldo1 { >> + regulator-name = "vreg_l1d_0p88"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <920000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-3 { >> + compatible = "qcom,pm8550vs-rpmh-regulators"; >> + qcom,pmic-id = "e"; >> + >> + vdd-l1-supply = <&vreg_s4e_0p95>; >> + vdd-l2-supply = <&vreg_s4e_0p95>; >> + vdd-l3-supply = <&vreg_s4g_1p25>; >> + vdd-s4-supply = <&vph_pwr>; >> + vdd-s5-supply = <&vph_pwr>; >> + >> + vreg_s4e_0p95: smps4 { >> + regulator-name = "vreg_s4e_0p95"; >> + regulator-min-microvolt = <904000>; >> + regulator-max-microvolt = <984000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s5e_1p08: smps5 { >> + regulator-name = "vreg_s5e_1p08"; >> + regulator-min-microvolt = <1010000>; >> + regulator-max-microvolt = <1120000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l1e_0p88: ldo1 { >> + regulator-name = "vreg_l1e_0p88"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <912000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2e_0p9: ldo2 { >> + regulator-name = "vreg_l2e_0p9"; >> + regulator-min-microvolt = <870000>; >> + regulator-max-microvolt = <970000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l3e_1p2: ldo3 { >> + regulator-name = "vreg_l3e_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-4 { >> + compatible = "qcom,pm8550ve-rpmh-regulators"; >> + qcom,pmic-id = "f"; >> + >> + vdd-l1-supply = <&vreg_s4e_0p95>; >> + vdd-l2-supply = <&vreg_s4e_0p95>; >> + vdd-l3-supply = <&vreg_s4e_0p95>; >> + vdd-s4-supply = <&vph_pwr>; >> + >> + vreg_s4f_0p5: smps4 { >> + regulator-name = "vreg_s4f_0p5"; >> + regulator-min-microvolt = <500000>; >> + regulator-max-microvolt = <600000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l1f_0p9: ldo1 { >> + regulator-name = "vreg_l1f_0p9"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <912000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2f_0p88: ldo2 { >> + regulator-name = "vreg_l2f_0p88"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <912000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l3f_0p88: ldo3 { >> + regulator-name = "vreg_l3f_0p88"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <912000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-5 { >> + compatible = "qcom,pm8550vs-rpmh-regulators"; >> + qcom,pmic-id = "g"; >> + vdd-l1-supply = <&vreg_s4g_1p25>; >> + vdd-l2-supply = <&vreg_s4g_1p25>; >> + vdd-l3-supply = <&vreg_s4g_1p25>; >> + vdd-s1-supply = <&vph_pwr>; >> + vdd-s2-supply = <&vph_pwr>; >> + vdd-s3-supply = <&vph_pwr>; >> + vdd-s4-supply = <&vph_pwr>; >> + vdd-s5-supply = <&vph_pwr>; >> + vdd-s6-supply = <&vph_pwr>; >> + >> + vreg_s1g_1p25: smps1 { >> + regulator-name = "vreg_s1g_1p25"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s2g_0p85: smps2 { >> + regulator-name = "vreg_s2g_0p85"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s3g_0p8: smps3 { >> + regulator-name = "vreg_s3g_0p8"; >> + regulator-min-microvolt = <300000>; >> + regulator-max-microvolt = <1004000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s4g_1p25: smps4 { >> + regulator-name = "vreg_s4g_1p25"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s5g_0p85: smps5 { >> + regulator-name = "vreg_s5g_0p85"; >> + regulator-min-microvolt = <500000>; >> + regulator-max-microvolt = <1004000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s6g_1p86: smps6 { >> + regulator-name = "vreg_s6g_1p86"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l1g_1p2: ldo1 { >> + regulator-name = "vreg_l1g_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2g_1p2: ldo2 { >> + regulator-name = "vreg_l2g_1p2"; >> + regulator-min-microvolt = <1100000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l3g_1p2: ldo3 { >> + regulator-name = "vreg_l3g_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> +}; >> + >> +&ufs_mem_hc { >> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; >> + vcc-supply = <&vreg_l17b_2p5>; >> + vcc-max-microamp = <1300000>; >> + vccq-supply = <&vreg_l1g_1p2>; >> + vccq-max-microamp = <1200000>; >> + vdd-hba-supply = <&vreg_l3g_1p2>; >> + >> + status = "okay"; >> +}; >> + >> +&ufs_mem_phy { >> + vdda-phy-supply = <&vreg_l1d_0p88>; >> + vdda-pll-supply = <&vreg_l3e_1p2>; >> + >> + status = "okay"; >> +}; >> -- >> 2.17.1 >> >> > >
On Wed, 20 Dec 2023 at 03:23, Tengfei Fan <quic_tengfan@quicinc.com> wrote: > > > > On 12/19/2023 6:25 PM, Dmitry Baryshkov wrote: > > On Tue, 19 Dec 2023 at 02:52, Tengfei Fan <quic_tengfan@quicinc.com> wrote: > >> > >> AIM300 is a module with QCS8550 SoC, UFS and PMIC chip. > >> AIM300 Series is a highly optimized family of modules designed to support > >> AIoT applications. The Module is mounted onto Qualcomm AIoT carrier board > >> to support verification, evaluation and development. > >> > >> Co-developed-by: Fenglin Wu <quic_fenglinw@quicinc.com> > >> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> > >> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> > >> --- > >> arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 371 +++++++++++++++++++ > >> 1 file changed, 371 insertions(+) > >> create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi > >> > >> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi > >> new file mode 100644 > >> index 000000000000..04ca4597f952 > >> --- /dev/null > >> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi > >> @@ -0,0 +1,371 @@ > >> +// SPDX-License-Identifier: BSD-3-Clause > >> +/* > >> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. > >> + */ > >> + > >> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > >> +#include "qcs8550.dtsi" > >> +#include "pm8010.dtsi" > >> +#include "pm8550.dtsi" > >> +#include "pm8550b.dtsi" > >> +#define PMK8550VE_SID 5 > >> +#include "pm8550ve.dtsi" > >> +#include "pm8550vs.dtsi" > >> +#include "pmk8550.dtsi" > >> +#include "pmr735d_a.dtsi" > >> +#include "pmr735d_b.dtsi" > >> + > >> +/ { > >> + vph_pwr: vph-pwr-regulator { > >> + compatible = "regulator-fixed"; > >> + regulator-name = "vph_pwr"; > >> + regulator-min-microvolt = <3700000>; > >> + regulator-max-microvolt = <3700000>; > >> + > >> + regulator-always-on; > >> + regulator-boot-on; > >> + }; > >> +}; > > > > Is VPH_PWR regulator present on the SoM or on the carrier board?VPH_PWR regulator present on the SoM. If not for gmail, I could have missed your reply. Maybe it is a good idea to add an explicit comment here. BTW: what regulators are present on the carrier board rather than on the SoM? > > > >> + > >> +&apps_rsc { > >> + regulators-0 { > >> + compatible = "qcom,pm8550-rpmh-regulators"; > >> + qcom,pmic-id = "b"; > >> + > >> + vdd-bob1-supply = <&vph_pwr>; > >> + vdd-bob2-supply = <&vph_pwr>; > >> + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; > >> + vdd-l2-l13-l14-supply = <&vreg_bob1>; > >> + vdd-l3-supply = <&vreg_s4g_1p25>; > >> + vdd-l5-l16-supply = <&vreg_bob1>; > >> + vdd-l6-l7-supply = <&vreg_bob1>; > >> + vdd-l8-l9-supply = <&vreg_bob1>; > >> + vdd-l11-supply = <&vreg_s4g_1p25>; > >> + vdd-l12-supply = <&vreg_s6g_1p86>; > >> + vdd-l15-supply = <&vreg_s6g_1p86>; > >> + vdd-l17-supply = <&vreg_bob2>; > >> + > >> + vreg_bob1: bob1 { > >> + regulator-name = "vreg_bob1"; > >> + regulator-min-microvolt = <3296000>; > >> + regulator-max-microvolt = <3960000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_bob2: bob2 { > >> + regulator-name = "vreg_bob2"; > >> + regulator-min-microvolt = <2720000>; > >> + regulator-max-microvolt = <3960000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l1b_1p8: ldo1 { > >> + regulator-name = "vreg_l1b_1p8"; > >> + regulator-min-microvolt = <1800000>; > >> + regulator-max-microvolt = <1800000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l2b_3p0: ldo2 { > >> + regulator-name = "vreg_l2b_3p0"; > >> + regulator-min-microvolt = <3008000>; > >> + regulator-max-microvolt = <3008000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l5b_3p1: ldo5 { > >> + regulator-name = "vreg_l5b_3p1"; > >> + regulator-min-microvolt = <3104000>; > >> + regulator-max-microvolt = <3104000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l6b_1p8: ldo6 { > >> + regulator-name = "vreg_l6b_1p8"; > >> + regulator-min-microvolt = <1800000>; > >> + regulator-max-microvolt = <3008000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l7b_1p8: ldo7 { > >> + regulator-name = "vreg_l7b_1p8"; > >> + regulator-min-microvolt = <1800000>; > >> + regulator-max-microvolt = <3008000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l8b_1p8: ldo8 { > >> + regulator-name = "vreg_l8b_1p8"; > >> + regulator-min-microvolt = <1800000>; > >> + regulator-max-microvolt = <3008000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l9b_2p9: ldo9 { > >> + regulator-name = "vreg_l9b_2p9"; > >> + regulator-min-microvolt = <2960000>; > >> + regulator-max-microvolt = <3008000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l11b_1p2: ldo11 { > >> + regulator-name = "vreg_l11b_1p2"; > >> + regulator-min-microvolt = <1200000>; > >> + regulator-max-microvolt = <1504000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l12b_1p8: ldo12 { > >> + regulator-name = "vreg_l12b_1p8"; > >> + regulator-min-microvolt = <1800000>; > >> + regulator-max-microvolt = <1800000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l13b_3p0: ldo13 { > >> + regulator-name = "vreg_l13b_3p0"; > >> + regulator-min-microvolt = <3000000>; > >> + regulator-max-microvolt = <3000000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l14b_3p2: ldo14 { > >> + regulator-name = "vreg_l14b_3p2"; > >> + regulator-min-microvolt = <3200000>; > >> + regulator-max-microvolt = <3200000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l15b_1p8: ldo15 { > >> + regulator-name = "vreg_l15b_1p8"; > >> + regulator-min-microvolt = <1800000>; > >> + regulator-max-microvolt = <1800000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l16b_2p8: ldo16 { > >> + regulator-name = "vreg_l16b_2p8"; > >> + regulator-min-microvolt = <1800000>; > >> + regulator-max-microvolt = <3300000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l17b_2p5: ldo17 { > >> + regulator-name = "vreg_l17b_2p5"; > >> + regulator-min-microvolt = <2504000>; > >> + regulator-max-microvolt = <2504000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + }; > >> + > >> + regulators-1 { > >> + compatible = "qcom,pm8550vs-rpmh-regulators"; > >> + qcom,pmic-id = "c"; > >> + > >> + vdd-l1-supply = <&vreg_s4g_1p25>; > >> + vdd-l2-supply = <&vreg_s4e_0p95>; > >> + vdd-l3-supply = <&vreg_s4e_0p95>; > >> + > >> + vreg_l3c_0p9: ldo3 { > >> + regulator-name = "vreg_l3c_0p9"; > >> + regulator-min-microvolt = <880000>; > >> + regulator-max-microvolt = <912000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + }; > >> + > >> + regulators-2 { > >> + compatible = "qcom,pm8550vs-rpmh-regulators"; > >> + qcom,pmic-id = "d"; > >> + > >> + vdd-l1-supply = <&vreg_s4e_0p95>; > >> + vdd-l2-supply = <&vreg_s4e_0p95>; > >> + vdd-l3-supply = <&vreg_s4e_0p95>; > >> + > >> + vreg_l1d_0p88: ldo1 { > >> + regulator-name = "vreg_l1d_0p88"; > >> + regulator-min-microvolt = <880000>; > >> + regulator-max-microvolt = <920000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + }; > >> + > >> + regulators-3 { > >> + compatible = "qcom,pm8550vs-rpmh-regulators"; > >> + qcom,pmic-id = "e"; > >> + > >> + vdd-l1-supply = <&vreg_s4e_0p95>; > >> + vdd-l2-supply = <&vreg_s4e_0p95>; > >> + vdd-l3-supply = <&vreg_s4g_1p25>; > >> + vdd-s4-supply = <&vph_pwr>; > >> + vdd-s5-supply = <&vph_pwr>; > >> + > >> + vreg_s4e_0p95: smps4 { > >> + regulator-name = "vreg_s4e_0p95"; > >> + regulator-min-microvolt = <904000>; > >> + regulator-max-microvolt = <984000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_s5e_1p08: smps5 { > >> + regulator-name = "vreg_s5e_1p08"; > >> + regulator-min-microvolt = <1010000>; > >> + regulator-max-microvolt = <1120000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l1e_0p88: ldo1 { > >> + regulator-name = "vreg_l1e_0p88"; > >> + regulator-min-microvolt = <880000>; > >> + regulator-max-microvolt = <912000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l2e_0p9: ldo2 { > >> + regulator-name = "vreg_l2e_0p9"; > >> + regulator-min-microvolt = <870000>; > >> + regulator-max-microvolt = <970000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l3e_1p2: ldo3 { > >> + regulator-name = "vreg_l3e_1p2"; > >> + regulator-min-microvolt = <1200000>; > >> + regulator-max-microvolt = <1200000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + }; > >> + > >> + regulators-4 { > >> + compatible = "qcom,pm8550ve-rpmh-regulators"; > >> + qcom,pmic-id = "f"; > >> + > >> + vdd-l1-supply = <&vreg_s4e_0p95>; > >> + vdd-l2-supply = <&vreg_s4e_0p95>; > >> + vdd-l3-supply = <&vreg_s4e_0p95>; > >> + vdd-s4-supply = <&vph_pwr>; > >> + > >> + vreg_s4f_0p5: smps4 { > >> + regulator-name = "vreg_s4f_0p5"; > >> + regulator-min-microvolt = <500000>; > >> + regulator-max-microvolt = <600000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l1f_0p9: ldo1 { > >> + regulator-name = "vreg_l1f_0p9"; > >> + regulator-min-microvolt = <880000>; > >> + regulator-max-microvolt = <912000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l2f_0p88: ldo2 { > >> + regulator-name = "vreg_l2f_0p88"; > >> + regulator-min-microvolt = <880000>; > >> + regulator-max-microvolt = <912000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l3f_0p88: ldo3 { > >> + regulator-name = "vreg_l3f_0p88"; > >> + regulator-min-microvolt = <880000>; > >> + regulator-max-microvolt = <912000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + }; > >> + > >> + regulators-5 { > >> + compatible = "qcom,pm8550vs-rpmh-regulators"; > >> + qcom,pmic-id = "g"; > >> + vdd-l1-supply = <&vreg_s4g_1p25>; > >> + vdd-l2-supply = <&vreg_s4g_1p25>; > >> + vdd-l3-supply = <&vreg_s4g_1p25>; > >> + vdd-s1-supply = <&vph_pwr>; > >> + vdd-s2-supply = <&vph_pwr>; > >> + vdd-s3-supply = <&vph_pwr>; > >> + vdd-s4-supply = <&vph_pwr>; > >> + vdd-s5-supply = <&vph_pwr>; > >> + vdd-s6-supply = <&vph_pwr>; > >> + > >> + vreg_s1g_1p25: smps1 { > >> + regulator-name = "vreg_s1g_1p25"; > >> + regulator-min-microvolt = <1200000>; > >> + regulator-max-microvolt = <1300000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_s2g_0p85: smps2 { > >> + regulator-name = "vreg_s2g_0p85"; > >> + regulator-min-microvolt = <800000>; > >> + regulator-max-microvolt = <1000000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_s3g_0p8: smps3 { > >> + regulator-name = "vreg_s3g_0p8"; > >> + regulator-min-microvolt = <300000>; > >> + regulator-max-microvolt = <1004000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_s4g_1p25: smps4 { > >> + regulator-name = "vreg_s4g_1p25"; > >> + regulator-min-microvolt = <1200000>; > >> + regulator-max-microvolt = <1300000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_s5g_0p85: smps5 { > >> + regulator-name = "vreg_s5g_0p85"; > >> + regulator-min-microvolt = <500000>; > >> + regulator-max-microvolt = <1004000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_s6g_1p86: smps6 { > >> + regulator-name = "vreg_s6g_1p86"; > >> + regulator-min-microvolt = <1800000>; > >> + regulator-max-microvolt = <2000000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l1g_1p2: ldo1 { > >> + regulator-name = "vreg_l1g_1p2"; > >> + regulator-min-microvolt = <1200000>; > >> + regulator-max-microvolt = <1200000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l2g_1p2: ldo2 { > >> + regulator-name = "vreg_l2g_1p2"; > >> + regulator-min-microvolt = <1100000>; > >> + regulator-max-microvolt = <1200000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + > >> + vreg_l3g_1p2: ldo3 { > >> + regulator-name = "vreg_l3g_1p2"; > >> + regulator-min-microvolt = <1200000>; > >> + regulator-max-microvolt = <1200000>; > >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > >> + }; > >> + }; > >> +}; > >> + > >> +&ufs_mem_hc { > >> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; > >> + vcc-supply = <&vreg_l17b_2p5>; > >> + vcc-max-microamp = <1300000>; > >> + vccq-supply = <&vreg_l1g_1p2>; > >> + vccq-max-microamp = <1200000>; > >> + vdd-hba-supply = <&vreg_l3g_1p2>; > >> + > >> + status = "okay"; > >> +}; > >> + > >> +&ufs_mem_phy { > >> + vdda-phy-supply = <&vreg_l1d_0p88>; > >> + vdda-pll-supply = <&vreg_l3e_1p2>; > >> + > >> + status = "okay"; > >> +}; > >> -- > >> 2.17.1 > >> > >> > > > > > > -- > Thx and BRs, > Tengfei Fan
On 12/20/2023 3:00 PM, Dmitry Baryshkov wrote: > On Wed, 20 Dec 2023 at 03:23, Tengfei Fan <quic_tengfan@quicinc.com> wrote: >> >> >> >> On 12/19/2023 6:25 PM, Dmitry Baryshkov wrote: >>> On Tue, 19 Dec 2023 at 02:52, Tengfei Fan <quic_tengfan@quicinc.com> wrote: >>>> >>>> AIM300 is a module with QCS8550 SoC, UFS and PMIC chip. >>>> AIM300 Series is a highly optimized family of modules designed to support >>>> AIoT applications. The Module is mounted onto Qualcomm AIoT carrier board >>>> to support verification, evaluation and development. >>>> >>>> Co-developed-by: Fenglin Wu <quic_fenglinw@quicinc.com> >>>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> >>>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> >>>> --- >>>> arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 371 +++++++++++++++++++ >>>> 1 file changed, 371 insertions(+) >>>> create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi >>>> >>>> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi >>>> new file mode 100644 >>>> index 000000000000..04ca4597f952 >>>> --- /dev/null >>>> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi >>>> @@ -0,0 +1,371 @@ >>>> +// SPDX-License-Identifier: BSD-3-Clause >>>> +/* >>>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. >>>> + */ >>>> + >>>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >>>> +#include "qcs8550.dtsi" >>>> +#include "pm8010.dtsi" >>>> +#include "pm8550.dtsi" >>>> +#include "pm8550b.dtsi" >>>> +#define PMK8550VE_SID 5 >>>> +#include "pm8550ve.dtsi" >>>> +#include "pm8550vs.dtsi" >>>> +#include "pmk8550.dtsi" >>>> +#include "pmr735d_a.dtsi" >>>> +#include "pmr735d_b.dtsi" >>>> + >>>> +/ { >>>> + vph_pwr: vph-pwr-regulator { >>>> + compatible = "regulator-fixed"; >>>> + regulator-name = "vph_pwr"; >>>> + regulator-min-microvolt = <3700000>; >>>> + regulator-max-microvolt = <3700000>; >>>> + >>>> + regulator-always-on; >>>> + regulator-boot-on; >>>> + }; >>>> +}; >>> >>> Is VPH_PWR regulator present on the SoM or on the carrier board?VPH_PWR regulator present on the SoM. > > If not for gmail, I could have missed your reply. > > Maybe it is a good idea to add an explicit comment here. ________________________________________ |AIM300 SoM | | _____ | | | | | | |--->| UFS | | | | |_____| | | | | | _________________ | _________ | 3.8v | | | | | | | -------->| Regulatorss |----->| QCS8550 | | | |_________________| | |_________| | | | | | | _____ | | | | | | | |--->| ... | | | |_____| | | | |________________________________________| VPH_PWR is obtained by vonverting 12v voltage into 3.8 voltage with a 3.8v buck. VPH_PWR is power supply for regulators in AIM300 SOM. VPH_PWR regulator is defined in AIM300 SOM dtsi file. > > BTW: what regulators are present on the carrier board rather than on the SoM? The regulators in pm8550, pm8550ve and pm8550vs are present on the SoM. The regulators in pm8010 and pmr73d are present on the carrier board. In the next version patch series, pm8010 and pmr73d will be moved from SOM dtsi to carrier board dts file. > >>> >>>> + >>>> +&apps_rsc { >>>> + regulators-0 { >>>> + compatible = "qcom,pm8550-rpmh-regulators"; >>>> + qcom,pmic-id = "b"; >>>> + >>>> + vdd-bob1-supply = <&vph_pwr>; >>>> + vdd-bob2-supply = <&vph_pwr>; >>>> + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; >>>> + vdd-l2-l13-l14-supply = <&vreg_bob1>; >>>> + vdd-l3-supply = <&vreg_s4g_1p25>; >>>> + vdd-l5-l16-supply = <&vreg_bob1>; >>>> + vdd-l6-l7-supply = <&vreg_bob1>; >>>> + vdd-l8-l9-supply = <&vreg_bob1>; >>>> + vdd-l11-supply = <&vreg_s4g_1p25>; >>>> + vdd-l12-supply = <&vreg_s6g_1p86>; >>>> + vdd-l15-supply = <&vreg_s6g_1p86>; >>>> + vdd-l17-supply = <&vreg_bob2>; >>>> + >>>> + vreg_bob1: bob1 { >>>> + regulator-name = "vreg_bob1"; >>>> + regulator-min-microvolt = <3296000>; >>>> + regulator-max-microvolt = <3960000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_bob2: bob2 { >>>> + regulator-name = "vreg_bob2"; >>>> + regulator-min-microvolt = <2720000>; >>>> + regulator-max-microvolt = <3960000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l1b_1p8: ldo1 { >>>> + regulator-name = "vreg_l1b_1p8"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <1800000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l2b_3p0: ldo2 { >>>> + regulator-name = "vreg_l2b_3p0"; >>>> + regulator-min-microvolt = <3008000>; >>>> + regulator-max-microvolt = <3008000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l5b_3p1: ldo5 { >>>> + regulator-name = "vreg_l5b_3p1"; >>>> + regulator-min-microvolt = <3104000>; >>>> + regulator-max-microvolt = <3104000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l6b_1p8: ldo6 { >>>> + regulator-name = "vreg_l6b_1p8"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <3008000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l7b_1p8: ldo7 { >>>> + regulator-name = "vreg_l7b_1p8"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <3008000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l8b_1p8: ldo8 { >>>> + regulator-name = "vreg_l8b_1p8"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <3008000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l9b_2p9: ldo9 { >>>> + regulator-name = "vreg_l9b_2p9"; >>>> + regulator-min-microvolt = <2960000>; >>>> + regulator-max-microvolt = <3008000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l11b_1p2: ldo11 { >>>> + regulator-name = "vreg_l11b_1p2"; >>>> + regulator-min-microvolt = <1200000>; >>>> + regulator-max-microvolt = <1504000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l12b_1p8: ldo12 { >>>> + regulator-name = "vreg_l12b_1p8"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <1800000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l13b_3p0: ldo13 { >>>> + regulator-name = "vreg_l13b_3p0"; >>>> + regulator-min-microvolt = <3000000>; >>>> + regulator-max-microvolt = <3000000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l14b_3p2: ldo14 { >>>> + regulator-name = "vreg_l14b_3p2"; >>>> + regulator-min-microvolt = <3200000>; >>>> + regulator-max-microvolt = <3200000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l15b_1p8: ldo15 { >>>> + regulator-name = "vreg_l15b_1p8"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <1800000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l16b_2p8: ldo16 { >>>> + regulator-name = "vreg_l16b_2p8"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <3300000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l17b_2p5: ldo17 { >>>> + regulator-name = "vreg_l17b_2p5"; >>>> + regulator-min-microvolt = <2504000>; >>>> + regulator-max-microvolt = <2504000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + }; >>>> + >>>> + regulators-1 { >>>> + compatible = "qcom,pm8550vs-rpmh-regulators"; >>>> + qcom,pmic-id = "c"; >>>> + >>>> + vdd-l1-supply = <&vreg_s4g_1p25>; >>>> + vdd-l2-supply = <&vreg_s4e_0p95>; >>>> + vdd-l3-supply = <&vreg_s4e_0p95>; >>>> + >>>> + vreg_l3c_0p9: ldo3 { >>>> + regulator-name = "vreg_l3c_0p9"; >>>> + regulator-min-microvolt = <880000>; >>>> + regulator-max-microvolt = <912000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + }; >>>> + >>>> + regulators-2 { >>>> + compatible = "qcom,pm8550vs-rpmh-regulators"; >>>> + qcom,pmic-id = "d"; >>>> + >>>> + vdd-l1-supply = <&vreg_s4e_0p95>; >>>> + vdd-l2-supply = <&vreg_s4e_0p95>; >>>> + vdd-l3-supply = <&vreg_s4e_0p95>; >>>> + >>>> + vreg_l1d_0p88: ldo1 { >>>> + regulator-name = "vreg_l1d_0p88"; >>>> + regulator-min-microvolt = <880000>; >>>> + regulator-max-microvolt = <920000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + }; >>>> + >>>> + regulators-3 { >>>> + compatible = "qcom,pm8550vs-rpmh-regulators"; >>>> + qcom,pmic-id = "e"; >>>> + >>>> + vdd-l1-supply = <&vreg_s4e_0p95>; >>>> + vdd-l2-supply = <&vreg_s4e_0p95>; >>>> + vdd-l3-supply = <&vreg_s4g_1p25>; >>>> + vdd-s4-supply = <&vph_pwr>; >>>> + vdd-s5-supply = <&vph_pwr>; >>>> + >>>> + vreg_s4e_0p95: smps4 { >>>> + regulator-name = "vreg_s4e_0p95"; >>>> + regulator-min-microvolt = <904000>; >>>> + regulator-max-microvolt = <984000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_s5e_1p08: smps5 { >>>> + regulator-name = "vreg_s5e_1p08"; >>>> + regulator-min-microvolt = <1010000>; >>>> + regulator-max-microvolt = <1120000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l1e_0p88: ldo1 { >>>> + regulator-name = "vreg_l1e_0p88"; >>>> + regulator-min-microvolt = <880000>; >>>> + regulator-max-microvolt = <912000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l2e_0p9: ldo2 { >>>> + regulator-name = "vreg_l2e_0p9"; >>>> + regulator-min-microvolt = <870000>; >>>> + regulator-max-microvolt = <970000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l3e_1p2: ldo3 { >>>> + regulator-name = "vreg_l3e_1p2"; >>>> + regulator-min-microvolt = <1200000>; >>>> + regulator-max-microvolt = <1200000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + }; >>>> + >>>> + regulators-4 { >>>> + compatible = "qcom,pm8550ve-rpmh-regulators"; >>>> + qcom,pmic-id = "f"; >>>> + >>>> + vdd-l1-supply = <&vreg_s4e_0p95>; >>>> + vdd-l2-supply = <&vreg_s4e_0p95>; >>>> + vdd-l3-supply = <&vreg_s4e_0p95>; >>>> + vdd-s4-supply = <&vph_pwr>; >>>> + >>>> + vreg_s4f_0p5: smps4 { >>>> + regulator-name = "vreg_s4f_0p5"; >>>> + regulator-min-microvolt = <500000>; >>>> + regulator-max-microvolt = <600000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l1f_0p9: ldo1 { >>>> + regulator-name = "vreg_l1f_0p9"; >>>> + regulator-min-microvolt = <880000>; >>>> + regulator-max-microvolt = <912000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l2f_0p88: ldo2 { >>>> + regulator-name = "vreg_l2f_0p88"; >>>> + regulator-min-microvolt = <880000>; >>>> + regulator-max-microvolt = <912000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l3f_0p88: ldo3 { >>>> + regulator-name = "vreg_l3f_0p88"; >>>> + regulator-min-microvolt = <880000>; >>>> + regulator-max-microvolt = <912000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + }; >>>> + >>>> + regulators-5 { >>>> + compatible = "qcom,pm8550vs-rpmh-regulators"; >>>> + qcom,pmic-id = "g"; >>>> + vdd-l1-supply = <&vreg_s4g_1p25>; >>>> + vdd-l2-supply = <&vreg_s4g_1p25>; >>>> + vdd-l3-supply = <&vreg_s4g_1p25>; >>>> + vdd-s1-supply = <&vph_pwr>; >>>> + vdd-s2-supply = <&vph_pwr>; >>>> + vdd-s3-supply = <&vph_pwr>; >>>> + vdd-s4-supply = <&vph_pwr>; >>>> + vdd-s5-supply = <&vph_pwr>; >>>> + vdd-s6-supply = <&vph_pwr>; >>>> + >>>> + vreg_s1g_1p25: smps1 { >>>> + regulator-name = "vreg_s1g_1p25"; >>>> + regulator-min-microvolt = <1200000>; >>>> + regulator-max-microvolt = <1300000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_s2g_0p85: smps2 { >>>> + regulator-name = "vreg_s2g_0p85"; >>>> + regulator-min-microvolt = <800000>; >>>> + regulator-max-microvolt = <1000000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_s3g_0p8: smps3 { >>>> + regulator-name = "vreg_s3g_0p8"; >>>> + regulator-min-microvolt = <300000>; >>>> + regulator-max-microvolt = <1004000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_s4g_1p25: smps4 { >>>> + regulator-name = "vreg_s4g_1p25"; >>>> + regulator-min-microvolt = <1200000>; >>>> + regulator-max-microvolt = <1300000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_s5g_0p85: smps5 { >>>> + regulator-name = "vreg_s5g_0p85"; >>>> + regulator-min-microvolt = <500000>; >>>> + regulator-max-microvolt = <1004000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_s6g_1p86: smps6 { >>>> + regulator-name = "vreg_s6g_1p86"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <2000000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l1g_1p2: ldo1 { >>>> + regulator-name = "vreg_l1g_1p2"; >>>> + regulator-min-microvolt = <1200000>; >>>> + regulator-max-microvolt = <1200000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l2g_1p2: ldo2 { >>>> + regulator-name = "vreg_l2g_1p2"; >>>> + regulator-min-microvolt = <1100000>; >>>> + regulator-max-microvolt = <1200000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + >>>> + vreg_l3g_1p2: ldo3 { >>>> + regulator-name = "vreg_l3g_1p2"; >>>> + regulator-min-microvolt = <1200000>; >>>> + regulator-max-microvolt = <1200000>; >>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>>> + }; >>>> + }; >>>> +}; >>>> + >>>> +&ufs_mem_hc { >>>> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; >>>> + vcc-supply = <&vreg_l17b_2p5>; >>>> + vcc-max-microamp = <1300000>; >>>> + vccq-supply = <&vreg_l1g_1p2>; >>>> + vccq-max-microamp = <1200000>; >>>> + vdd-hba-supply = <&vreg_l3g_1p2>; >>>> + >>>> + status = "okay"; >>>> +}; >>>> + >>>> +&ufs_mem_phy { >>>> + vdda-phy-supply = <&vreg_l1d_0p88>; >>>> + vdda-pll-supply = <&vreg_l3e_1p2>; >>>> + >>>> + status = "okay"; >>>> +}; >>>> -- >>>> 2.17.1 >>>> >>>> >>> >>> >> >> -- >> Thx and BRs, >> Tengfei Fan > > >
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi new file mode 100644 index 000000000000..04ca4597f952 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi @@ -0,0 +1,371 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qcs8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 5 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" + +/ { + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p25>; + vdd-l12-supply = <&vreg_s6g_1p86>; + vdd-l15-supply = <&vreg_s6g_1p86>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s4e_0p95: smps4 { + regulator-name = "vreg_s4e_0p95"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p08: smps5 { + regulator-name = "vreg_s5e_1p08"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p88: ldo3 { + regulator-name = "vreg_l3f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vreg_s1g_1p25: smps1 { + regulator-name = "vreg_s1g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p85: smps2 { + regulator-name = "vreg_s2g_0p85"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p8: smps3 { + regulator-name = "vreg_s3g_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p25: smps4 { + regulator-name = "vreg_s4g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p85: smps5 { + regulator-name = "vreg_s5g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p86: smps6 { + regulator-name = "vreg_s6g_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2g_1p2: ldo2 { + regulator-name = "vreg_l2g_1p2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l3g_1p2>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +};