| Message ID | 20231225130853.3659424-5-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | drm/msm/dpu: remove dpu_encoder_phys_ops::atomic_mode_set callback | expand |
On 12/25/2023 5:08 AM, Dmitry Baryshkov wrote: > dpu_encoder_phys_wb is the only user of encoder's atomic_check callback. > Move corresponding checks to drm_writeback_connector's implementation > and drop the dpu_encoder_phys_wb_atomic_check() function. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 54 ------------------ > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 9 ++- > drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c | 57 ++++++++++++++++++- > drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h | 3 +- > 4 files changed, 64 insertions(+), 59 deletions(-) > I am fine with this change with respect to how the code is today. Hence, Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> But if we start noticing a pattern like below in dpu_encoder.c's atomic_check, if (INTF_WB) ..... else if (INTF_DP || INTF_DSI) ..... then, it will demand bringing back a phys specific callback.
On Mon, 8 Jan 2024 at 23:39, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > > > > On 12/25/2023 5:08 AM, Dmitry Baryshkov wrote: > > dpu_encoder_phys_wb is the only user of encoder's atomic_check callback. > > Move corresponding checks to drm_writeback_connector's implementation > > and drop the dpu_encoder_phys_wb_atomic_check() function. > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > --- > > .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 54 ------------------ > > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 9 ++- > > drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c | 57 ++++++++++++++++++- > > drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h | 3 +- > > 4 files changed, 64 insertions(+), 59 deletions(-) > > > > I am fine with this change with respect to how the code is today. > > Hence, > > Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> > > But if we start noticing a pattern like below in dpu_encoder.c's > atomic_check, > > if (INTF_WB) > ..... > else if (INTF_DP || INTF_DSI) > ..... > > then, it will demand bringing back a phys specific callback. The problem is that INTF_DP || INTF_DSI does not have the phys-specific implementation. So while I agree about the INTF_WB part, INTF_DP || INTF_DSI either should go as is, or it should be refactored into output-specific handlers.
On 12/25/2023 5:08 AM, Dmitry Baryshkov wrote: > dpu_encoder_phys_wb is the only user of encoder's atomic_check callback. > Move corresponding checks to drm_writeback_connector's implementation > and drop the dpu_encoder_phys_wb_atomic_check() function. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 54 ------------------ > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 9 ++- > drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c | 57 ++++++++++++++++++- > drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h | 3 +- > 4 files changed, 64 insertions(+), 59 deletions(-) > While validating this change with kms_writeback, we found that this is breaking back to back validate of kms_writeback with a NULL ptr dereference in below stack: [ 86.701062] Call trace: [ 86.701067] dpu_wb_conn_atomic_check+0x118/0x18c [ 86.701076] drm_atomic_helper_check_modeset+0x2d8/0x688 [ 86.701084] drm_atomic_helper_check+0x24/0x98 [ 86.701095] msm_atomic_check+0x90/0x9c [ 86.701103] drm_atomic_check_only+0x4f4/0x8e8 [ 86.701111] drm_atomic_commit+0x64/0xd8 [ 86.701120] drm_mode_atomic_ioctl+0xbfc/0xe74 [ 86.701129] drm_ioctl_kernel+0xd4/0x114 [ 86.701137] drm_ioctl+0x274/0x508 [ 86.701143] __arm64_sys_ioctl+0x98/0xd0 [ 86.701152] invoke_syscall+0x48/0xfc [ 86.701161] el0_svc_common+0x88/0xe4 [ 86.701167] do_el0_svc+0x24/0x30 [ 86.701175] el0_svc+0x34/0x80 [ 86.701184] el0t_64_sync_handler+0x44/0xec [ 86.701192] el0t_64_sync+0x1a8/0x1ac [ 86.701200] ---[ end trace 0000000000000000 ]--- We analysed this and found why. Please see below. > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > index a0a28230fc31..8220cd920e6f 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > @@ -354,59 +354,6 @@ static void dpu_encoder_helper_phys_setup_cdm(struct dpu_encoder_phys *phys_enc) > } > } > > -/** > - * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic states > - * @phys_enc: Pointer to physical encoder > - * @crtc_state: Pointer to CRTC atomic state > - * @conn_state: Pointer to connector atomic state > - */ > -static int dpu_encoder_phys_wb_atomic_check( > - struct dpu_encoder_phys *phys_enc, > - struct drm_crtc_state *crtc_state, > - struct drm_connector_state *conn_state) > -{ > - struct drm_framebuffer *fb; > - const struct drm_display_mode *mode = &crtc_state->mode; > - > - DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", > - phys_enc->hw_wb->idx, mode->name, mode->hdisplay, mode->vdisplay); > - > - if (!conn_state || !conn_state->connector) { > - DPU_ERROR("invalid connector state\n"); > - return -EINVAL; > - } else if (conn_state->connector->status != > - connector_status_connected) { > - DPU_ERROR("connector not connected %d\n", > - conn_state->connector->status); > - return -EINVAL; > - } > - > - if (!conn_state->writeback_job || !conn_state->writeback_job->fb) > - return 0; > - > - fb = conn_state->writeback_job->fb; > - > - DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, > - fb->width, fb->height); > - > - if (fb->width != mode->hdisplay) { > - DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, > - mode->hdisplay); > - return -EINVAL; > - } else if (fb->height != mode->vdisplay) { > - DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, > - mode->vdisplay); > - return -EINVAL; > - } else if (fb->width > phys_enc->hw_wb->caps->maxlinewidth) { > - DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", > - fb->width, phys_enc->hw_wb->caps->maxlinewidth); > - return -EINVAL; > - } > - > - return drm_atomic_helper_check_wb_connector_state(conn_state->connector, conn_state->state); > -} > - > - > /** > * _dpu_encoder_phys_wb_update_flush - flush hardware update > * @phys_enc: Pointer to physical encoder > @@ -777,7 +724,6 @@ static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops *ops) > ops->is_master = dpu_encoder_phys_wb_is_master; > ops->enable = dpu_encoder_phys_wb_enable; > ops->disable = dpu_encoder_phys_wb_disable; > - ops->atomic_check = dpu_encoder_phys_wb_atomic_check; > ops->wait_for_commit_done = dpu_encoder_phys_wb_wait_for_commit_done; > ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff; > ops->handle_post_kickoff = dpu_encoder_phys_wb_handle_post_kickoff; > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > index 723cc1d82143..48728be27e15 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > @@ -630,23 +630,26 @@ static int _dpu_kms_initialize_writeback(struct drm_device *dev, > { > struct drm_encoder *encoder = NULL; > struct msm_display_info info; > + const enum dpu_wb wb_idx = WB_2; > + u32 maxlinewidth; > int rc; > > memset(&info, 0, sizeof(info)); > > info.num_of_h_tiles = 1; > /* use only WB idx 2 instance for DPU */ > - info.h_tile_instance[0] = WB_2; > + info.h_tile_instance[0] = wb_idx; > info.intf_type = INTF_WB; > > + maxlinewidth = dpu_rm_get_wb(&dpu_kms->rm, info.h_tile_instance[0])->caps->maxlinewidth; > + > encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_VIRTUAL, &info); > if (IS_ERR(encoder)) { > DPU_ERROR("encoder init failed for dsi display\n"); > return PTR_ERR(encoder); > } > > - rc = dpu_writeback_init(dev, encoder, wb_formats, > - n_formats); > + rc = dpu_writeback_init(dev, encoder, wb_formats, n_formats, maxlinewidth); > if (rc) { > DPU_ERROR("dpu_writeback_init, rc = %d\n", rc); > return rc; > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c > index 2a5a68366582..232b5f410de8 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c > @@ -4,6 +4,7 @@ > */ > > #include <drm/drm_edid.h> > +#include <drm/drm_framebuffer.h> > > #include "dpu_writeback.h" > > @@ -24,6 +25,57 @@ static int dpu_wb_conn_get_modes(struct drm_connector *connector) > dev->mode_config.max_height); > } > > +static int dpu_wb_conn_atomic_check(struct drm_connector *connector, > + struct drm_atomic_state *state) > +{ > + struct drm_writeback_connector *wb_conn = drm_connector_to_writeback(connector); > + struct dpu_wb_connector *dpu_wb_conn = to_dpu_wb_conn(wb_conn); > + struct drm_connector_state *conn_state = > + drm_atomic_get_new_connector_state(state, connector); > + struct drm_crtc *crtc = conn_state->crtc; > + struct drm_crtc_state *crtc_state; > + const struct drm_display_mode *mode; > + struct drm_framebuffer *fb; > + > + crtc_state = drm_atomic_get_crtc_state(state, crtc); To detach the CRTC associated with the connector, IGT will set the associated CRTC_ID to 0 and the associated conn_state->crtc will be NULL. This is valid as val will be 0 in this case: https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/drm_atomic_uapi.c#L722 Before this patch, for these cases, we used to call the encoder's atomic_check which gets skipped when there is no valid crtc: https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/drm_atomic_helper.c#L440 But now with connector atomic check, these calls are allowed by the DRM https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/drm_atomic_helper.c#L712 So questions: 1) Should we add protection in DRM to check if conn_state->crtc is valid before calling connector's atomic_check()? OR 2) Is it incorrect for us to dereference conn->crtc in connector's atomic_check as its not guaranteed to be valid. We cannot fail atomic_check for !crtc, because if we add a !crtc check and fail those checks, it bails out these disable commit calls thus failing those commits. > + if (IS_ERR(crtc_state)) > + return PTR_ERR(crtc_state); > + > + mode = &crtc_state->mode; > + > + DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", > + connector->base.id, mode->name, mode->hdisplay, mode->vdisplay); > + > + if (!conn_state || !conn_state->connector) { > + DPU_ERROR("invalid connector state\n"); > + return -EINVAL; > + } else if (conn_state->connector->status != connector_status_connected) { > + DPU_ERROR("connector not connected %d\n", conn_state->connector->status); > + return -EINVAL; > + } > + > + if (!conn_state->writeback_job || !conn_state->writeback_job->fb) > + return 0; > + > + fb = conn_state->writeback_job->fb; > + > + DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, fb->width, fb->height); > + > + if (fb->width != mode->hdisplay) { > + DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, mode->hdisplay); > + return -EINVAL; > + } else if (fb->height != mode->vdisplay) { > + DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, mode->vdisplay); > + return -EINVAL; > + } else if (fb->width > dpu_wb_conn->maxlinewidth) { > + DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", > + fb->width, dpu_wb_conn->maxlinewidth); > + return -EINVAL; > + } > + > + return drm_atomic_helper_check_wb_connector_state(conn_state->connector, conn_state->state); > +} > + > static const struct drm_connector_funcs dpu_wb_conn_funcs = { > .reset = drm_atomic_helper_connector_reset, > .fill_modes = drm_helper_probe_single_connector_modes, > @@ -59,12 +111,13 @@ static void dpu_wb_conn_cleanup_job(struct drm_writeback_connector *connector, > > static const struct drm_connector_helper_funcs dpu_wb_conn_helper_funcs = { > .get_modes = dpu_wb_conn_get_modes, > + .atomic_check = dpu_wb_conn_atomic_check, > .prepare_writeback_job = dpu_wb_conn_prepare_job, > .cleanup_writeback_job = dpu_wb_conn_cleanup_job, > }; > > int dpu_writeback_init(struct drm_device *dev, struct drm_encoder *enc, > - const u32 *format_list, u32 num_formats) > + const u32 *format_list, u32 num_formats, u32 maxlinewidth) > { > struct dpu_wb_connector *dpu_wb_conn; > int rc = 0; > @@ -73,6 +126,8 @@ int dpu_writeback_init(struct drm_device *dev, struct drm_encoder *enc, > if (!dpu_wb_conn) > return -ENOMEM; > > + dpu_wb_conn->maxlinewidth = maxlinewidth; > + > drm_connector_helper_add(&dpu_wb_conn->base.base, &dpu_wb_conn_helper_funcs); > > /* DPU initializes the encoder and sets it up completely for writeback > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h > index 5a75ea916101..4b11cca8014c 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h > @@ -18,6 +18,7 @@ > struct dpu_wb_connector { > struct drm_writeback_connector base; > struct drm_encoder *wb_enc; > + u32 maxlinewidth; > }; > > static inline struct dpu_wb_connector *to_dpu_wb_conn(struct drm_writeback_connector *conn) > @@ -26,6 +27,6 @@ static inline struct dpu_wb_connector *to_dpu_wb_conn(struct drm_writeback_conne > } > > int dpu_writeback_init(struct drm_device *dev, struct drm_encoder *enc, > - const u32 *format_list, u32 num_formats); > + const u32 *format_list, u32 num_formats, u32 maxlinewidth); > > #endif /*_DPU_WRITEBACK_H */
On Wed, 24 Jan 2024 at 00:23, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > On 12/25/2023 5:08 AM, Dmitry Baryshkov wrote: > > dpu_encoder_phys_wb is the only user of encoder's atomic_check callback. > > Move corresponding checks to drm_writeback_connector's implementation > > and drop the dpu_encoder_phys_wb_atomic_check() function. > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > --- > > .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 54 ------------------ > > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 9 ++- > > drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c | 57 ++++++++++++++++++- > > drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h | 3 +- > > 4 files changed, 64 insertions(+), 59 deletions(-) > > > > While validating this change with kms_writeback, we found that this is > breaking back to back validate of kms_writeback with a NULL ptr > dereference in below stack: > > [ 86.701062] Call trace: > [ 86.701067] dpu_wb_conn_atomic_check+0x118/0x18c > [ 86.701076] drm_atomic_helper_check_modeset+0x2d8/0x688 > [ 86.701084] drm_atomic_helper_check+0x24/0x98 > [ 86.701095] msm_atomic_check+0x90/0x9c > [ 86.701103] drm_atomic_check_only+0x4f4/0x8e8 > [ 86.701111] drm_atomic_commit+0x64/0xd8 > [ 86.701120] drm_mode_atomic_ioctl+0xbfc/0xe74 > [ 86.701129] drm_ioctl_kernel+0xd4/0x114 > [ 86.701137] drm_ioctl+0x274/0x508 > [ 86.701143] __arm64_sys_ioctl+0x98/0xd0 > [ 86.701152] invoke_syscall+0x48/0xfc > [ 86.701161] el0_svc_common+0x88/0xe4 > [ 86.701167] do_el0_svc+0x24/0x30 > [ 86.701175] el0_svc+0x34/0x80 > [ 86.701184] el0t_64_sync_handler+0x44/0xec > [ 86.701192] el0t_64_sync+0x1a8/0x1ac > [ 86.701200] ---[ end trace 0000000000000000 ]--- > > We analysed this and found why. Please see below. > > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > > index a0a28230fc31..8220cd920e6f 100644 > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c > > @@ -354,59 +354,6 @@ static void dpu_encoder_helper_phys_setup_cdm(struct dpu_encoder_phys *phys_enc) > > } > > } > > > > -/** > > - * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic states > > - * @phys_enc: Pointer to physical encoder > > - * @crtc_state: Pointer to CRTC atomic state > > - * @conn_state: Pointer to connector atomic state > > - */ > > -static int dpu_encoder_phys_wb_atomic_check( > > - struct dpu_encoder_phys *phys_enc, > > - struct drm_crtc_state *crtc_state, > > - struct drm_connector_state *conn_state) > > -{ > > - struct drm_framebuffer *fb; > > - const struct drm_display_mode *mode = &crtc_state->mode; > > - > > - DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", > > - phys_enc->hw_wb->idx, mode->name, mode->hdisplay, mode->vdisplay); > > - > > - if (!conn_state || !conn_state->connector) { > > - DPU_ERROR("invalid connector state\n"); > > - return -EINVAL; > > - } else if (conn_state->connector->status != > > - connector_status_connected) { > > - DPU_ERROR("connector not connected %d\n", > > - conn_state->connector->status); > > - return -EINVAL; > > - } > > - > > - if (!conn_state->writeback_job || !conn_state->writeback_job->fb) > > - return 0; > > - > > - fb = conn_state->writeback_job->fb; > > - > > - DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, > > - fb->width, fb->height); > > - > > - if (fb->width != mode->hdisplay) { > > - DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, > > - mode->hdisplay); > > - return -EINVAL; > > - } else if (fb->height != mode->vdisplay) { > > - DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, > > - mode->vdisplay); > > - return -EINVAL; > > - } else if (fb->width > phys_enc->hw_wb->caps->maxlinewidth) { > > - DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", > > - fb->width, phys_enc->hw_wb->caps->maxlinewidth); > > - return -EINVAL; > > - } > > - > > - return drm_atomic_helper_check_wb_connector_state(conn_state->connector, conn_state->state); > > -} > > - > > - > > /** > > * _dpu_encoder_phys_wb_update_flush - flush hardware update > > * @phys_enc: Pointer to physical encoder > > @@ -777,7 +724,6 @@ static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops *ops) > > ops->is_master = dpu_encoder_phys_wb_is_master; > > ops->enable = dpu_encoder_phys_wb_enable; > > ops->disable = dpu_encoder_phys_wb_disable; > > - ops->atomic_check = dpu_encoder_phys_wb_atomic_check; > > ops->wait_for_commit_done = dpu_encoder_phys_wb_wait_for_commit_done; > > ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff; > > ops->handle_post_kickoff = dpu_encoder_phys_wb_handle_post_kickoff; > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > > index 723cc1d82143..48728be27e15 100644 > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > > @@ -630,23 +630,26 @@ static int _dpu_kms_initialize_writeback(struct drm_device *dev, > > { > > struct drm_encoder *encoder = NULL; > > struct msm_display_info info; > > + const enum dpu_wb wb_idx = WB_2; > > + u32 maxlinewidth; > > int rc; > > > > memset(&info, 0, sizeof(info)); > > > > info.num_of_h_tiles = 1; > > /* use only WB idx 2 instance for DPU */ > > - info.h_tile_instance[0] = WB_2; > > + info.h_tile_instance[0] = wb_idx; > > info.intf_type = INTF_WB; > > > > + maxlinewidth = dpu_rm_get_wb(&dpu_kms->rm, info.h_tile_instance[0])->caps->maxlinewidth; > > + > > encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_VIRTUAL, &info); > > if (IS_ERR(encoder)) { > > DPU_ERROR("encoder init failed for dsi display\n"); > > return PTR_ERR(encoder); > > } > > > > - rc = dpu_writeback_init(dev, encoder, wb_formats, > > - n_formats); > > + rc = dpu_writeback_init(dev, encoder, wb_formats, n_formats, maxlinewidth); > > if (rc) { > > DPU_ERROR("dpu_writeback_init, rc = %d\n", rc); > > return rc; > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c > > index 2a5a68366582..232b5f410de8 100644 > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c > > @@ -4,6 +4,7 @@ > > */ > > > > #include <drm/drm_edid.h> > > +#include <drm/drm_framebuffer.h> > > > > #include "dpu_writeback.h" > > > > @@ -24,6 +25,57 @@ static int dpu_wb_conn_get_modes(struct drm_connector *connector) > > dev->mode_config.max_height); > > } > > > > +static int dpu_wb_conn_atomic_check(struct drm_connector *connector, > > + struct drm_atomic_state *state) > > +{ > > + struct drm_writeback_connector *wb_conn = drm_connector_to_writeback(connector); > > + struct dpu_wb_connector *dpu_wb_conn = to_dpu_wb_conn(wb_conn); > > + struct drm_connector_state *conn_state = > > + drm_atomic_get_new_connector_state(state, connector); > > + struct drm_crtc *crtc = conn_state->crtc; > > + struct drm_crtc_state *crtc_state; > > + const struct drm_display_mode *mode; > > + struct drm_framebuffer *fb; > > + > > + crtc_state = drm_atomic_get_crtc_state(state, crtc); > > To detach the CRTC associated with the connector, IGT will set the > associated CRTC_ID to 0 and the associated conn_state->crtc will be NULL. > > This is valid as val will be 0 in this case: > > https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/drm_atomic_uapi.c#L722 > > Before this patch, for these cases, we used to call the encoder's > atomic_check which gets skipped when there is no valid crtc: > > https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/drm_atomic_helper.c#L440 > > But now with connector atomic check, these calls are allowed by the DRM > > https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/drm_atomic_helper.c#L712 > > So questions: > > 1) Should we add protection in DRM to check if conn_state->crtc is valid > before calling connector's atomic_check()? I think this is correct. So if !crtc, just return 0. I'll send next iteration in the next few days. > > OR > > 2) Is it incorrect for us to dereference conn->crtc in connector's > atomic_check as its not guaranteed to be valid. > > We cannot fail atomic_check for !crtc, because if we add a !crtc check > and fail those checks, it bails out these disable commit calls thus > failing those commits. > > > + if (IS_ERR(crtc_state)) > > + return PTR_ERR(crtc_state); > > +
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c index a0a28230fc31..8220cd920e6f 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c @@ -354,59 +354,6 @@ static void dpu_encoder_helper_phys_setup_cdm(struct dpu_encoder_phys *phys_enc) } } -/** - * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic states - * @phys_enc: Pointer to physical encoder - * @crtc_state: Pointer to CRTC atomic state - * @conn_state: Pointer to connector atomic state - */ -static int dpu_encoder_phys_wb_atomic_check( - struct dpu_encoder_phys *phys_enc, - struct drm_crtc_state *crtc_state, - struct drm_connector_state *conn_state) -{ - struct drm_framebuffer *fb; - const struct drm_display_mode *mode = &crtc_state->mode; - - DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", - phys_enc->hw_wb->idx, mode->name, mode->hdisplay, mode->vdisplay); - - if (!conn_state || !conn_state->connector) { - DPU_ERROR("invalid connector state\n"); - return -EINVAL; - } else if (conn_state->connector->status != - connector_status_connected) { - DPU_ERROR("connector not connected %d\n", - conn_state->connector->status); - return -EINVAL; - } - - if (!conn_state->writeback_job || !conn_state->writeback_job->fb) - return 0; - - fb = conn_state->writeback_job->fb; - - DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, - fb->width, fb->height); - - if (fb->width != mode->hdisplay) { - DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, - mode->hdisplay); - return -EINVAL; - } else if (fb->height != mode->vdisplay) { - DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, - mode->vdisplay); - return -EINVAL; - } else if (fb->width > phys_enc->hw_wb->caps->maxlinewidth) { - DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", - fb->width, phys_enc->hw_wb->caps->maxlinewidth); - return -EINVAL; - } - - return drm_atomic_helper_check_wb_connector_state(conn_state->connector, conn_state->state); -} - - /** * _dpu_encoder_phys_wb_update_flush - flush hardware update * @phys_enc: Pointer to physical encoder @@ -777,7 +724,6 @@ static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops *ops) ops->is_master = dpu_encoder_phys_wb_is_master; ops->enable = dpu_encoder_phys_wb_enable; ops->disable = dpu_encoder_phys_wb_disable; - ops->atomic_check = dpu_encoder_phys_wb_atomic_check; ops->wait_for_commit_done = dpu_encoder_phys_wb_wait_for_commit_done; ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff; ops->handle_post_kickoff = dpu_encoder_phys_wb_handle_post_kickoff; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 723cc1d82143..48728be27e15 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -630,23 +630,26 @@ static int _dpu_kms_initialize_writeback(struct drm_device *dev, { struct drm_encoder *encoder = NULL; struct msm_display_info info; + const enum dpu_wb wb_idx = WB_2; + u32 maxlinewidth; int rc; memset(&info, 0, sizeof(info)); info.num_of_h_tiles = 1; /* use only WB idx 2 instance for DPU */ - info.h_tile_instance[0] = WB_2; + info.h_tile_instance[0] = wb_idx; info.intf_type = INTF_WB; + maxlinewidth = dpu_rm_get_wb(&dpu_kms->rm, info.h_tile_instance[0])->caps->maxlinewidth; + encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_VIRTUAL, &info); if (IS_ERR(encoder)) { DPU_ERROR("encoder init failed for dsi display\n"); return PTR_ERR(encoder); } - rc = dpu_writeback_init(dev, encoder, wb_formats, - n_formats); + rc = dpu_writeback_init(dev, encoder, wb_formats, n_formats, maxlinewidth); if (rc) { DPU_ERROR("dpu_writeback_init, rc = %d\n", rc); return rc; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c index 2a5a68366582..232b5f410de8 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c @@ -4,6 +4,7 @@ */ #include <drm/drm_edid.h> +#include <drm/drm_framebuffer.h> #include "dpu_writeback.h" @@ -24,6 +25,57 @@ static int dpu_wb_conn_get_modes(struct drm_connector *connector) dev->mode_config.max_height); } +static int dpu_wb_conn_atomic_check(struct drm_connector *connector, + struct drm_atomic_state *state) +{ + struct drm_writeback_connector *wb_conn = drm_connector_to_writeback(connector); + struct dpu_wb_connector *dpu_wb_conn = to_dpu_wb_conn(wb_conn); + struct drm_connector_state *conn_state = + drm_atomic_get_new_connector_state(state, connector); + struct drm_crtc *crtc = conn_state->crtc; + struct drm_crtc_state *crtc_state; + const struct drm_display_mode *mode; + struct drm_framebuffer *fb; + + crtc_state = drm_atomic_get_crtc_state(state, crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); + + mode = &crtc_state->mode; + + DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n", + connector->base.id, mode->name, mode->hdisplay, mode->vdisplay); + + if (!conn_state || !conn_state->connector) { + DPU_ERROR("invalid connector state\n"); + return -EINVAL; + } else if (conn_state->connector->status != connector_status_connected) { + DPU_ERROR("connector not connected %d\n", conn_state->connector->status); + return -EINVAL; + } + + if (!conn_state->writeback_job || !conn_state->writeback_job->fb) + return 0; + + fb = conn_state->writeback_job->fb; + + DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, fb->width, fb->height); + + if (fb->width != mode->hdisplay) { + DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, mode->hdisplay); + return -EINVAL; + } else if (fb->height != mode->vdisplay) { + DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, mode->vdisplay); + return -EINVAL; + } else if (fb->width > dpu_wb_conn->maxlinewidth) { + DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", + fb->width, dpu_wb_conn->maxlinewidth); + return -EINVAL; + } + + return drm_atomic_helper_check_wb_connector_state(conn_state->connector, conn_state->state); +} + static const struct drm_connector_funcs dpu_wb_conn_funcs = { .reset = drm_atomic_helper_connector_reset, .fill_modes = drm_helper_probe_single_connector_modes, @@ -59,12 +111,13 @@ static void dpu_wb_conn_cleanup_job(struct drm_writeback_connector *connector, static const struct drm_connector_helper_funcs dpu_wb_conn_helper_funcs = { .get_modes = dpu_wb_conn_get_modes, + .atomic_check = dpu_wb_conn_atomic_check, .prepare_writeback_job = dpu_wb_conn_prepare_job, .cleanup_writeback_job = dpu_wb_conn_cleanup_job, }; int dpu_writeback_init(struct drm_device *dev, struct drm_encoder *enc, - const u32 *format_list, u32 num_formats) + const u32 *format_list, u32 num_formats, u32 maxlinewidth) { struct dpu_wb_connector *dpu_wb_conn; int rc = 0; @@ -73,6 +126,8 @@ int dpu_writeback_init(struct drm_device *dev, struct drm_encoder *enc, if (!dpu_wb_conn) return -ENOMEM; + dpu_wb_conn->maxlinewidth = maxlinewidth; + drm_connector_helper_add(&dpu_wb_conn->base.base, &dpu_wb_conn_helper_funcs); /* DPU initializes the encoder and sets it up completely for writeback diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h index 5a75ea916101..4b11cca8014c 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h @@ -18,6 +18,7 @@ struct dpu_wb_connector { struct drm_writeback_connector base; struct drm_encoder *wb_enc; + u32 maxlinewidth; }; static inline struct dpu_wb_connector *to_dpu_wb_conn(struct drm_writeback_connector *conn) @@ -26,6 +27,6 @@ static inline struct dpu_wb_connector *to_dpu_wb_conn(struct drm_writeback_conne } int dpu_writeback_init(struct drm_device *dev, struct drm_encoder *enc, - const u32 *format_list, u32 num_formats); + const u32 *format_list, u32 num_formats, u32 maxlinewidth); #endif /*_DPU_WRITEBACK_H */
dpu_encoder_phys_wb is the only user of encoder's atomic_check callback. Move corresponding checks to drm_writeback_connector's implementation and drop the dpu_encoder_phys_wb_atomic_check() function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 54 ------------------ drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 9 ++- drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c | 57 ++++++++++++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.h | 3 +- 4 files changed, 64 insertions(+), 59 deletions(-)